Skip to main content

Research Repository

Advanced Search

All Outputs (50)

Dispersion and stability of colloidal boron carbide suspensions (2020)
Journal Article
Lakhdar, Y., Tuck, C., Terry, A., & Goodridge, R. (2020). Dispersion and stability of colloidal boron carbide suspensions. Ceramics International, 46(18, Part A), 27957-27966. https://doi.org/10.1016/j.ceramint.2020.07.289

The effects of several anionic, cationic and non-ionic polyelectrolyte dispersants on the stability and rheology of aqueous boron carbide (B4C) suspensions were investigated using zeta potential measurements, settling experiments, and rheological stu... Read More about Dispersion and stability of colloidal boron carbide suspensions.

Inkjet based 3D Printing of bespoke medical devices that resist bacterial biofilm formation (2020)
Preprint / Working Paper
He, Y., Begines, B., Luckett, J., Dubern, J., Hook, A., Prina, E., …Wildman, R. D. Inkjet based 3D Printing of bespoke medical devices that resist bacterial biofilm formation

We demonstrate the formulation of advanced functional 3D printing inks that prevent the formation of bacterial biofilms in vivo. Starting from polymer libraries, we show that a biofilm resistant object can be 3D printed with the potential for shape a... Read More about Inkjet based 3D Printing of bespoke medical devices that resist bacterial biofilm formation.

Design and optical characterisation of an efficient light trapping structure for dye-sensitized solar cell integrated windows (2018)
Journal Article
Knott, A., Liu, X., Makarovskiy, O., O'Shea, J., Tuck, C., & Wu, Y. (2019). Design and optical characterisation of an efficient light trapping structure for dye-sensitized solar cell integrated windows. Building Simulation, 12(1), 41-49. https://doi.org/10.1007/s12273-018-0485-1

Windows integrated with semi-transparent photovoltaics (PVs) such as Dye-Sensitized Solar Cells (DSSCs) show good potential in improving building performance, in term of providing daylight, reducing unnecessary solar heat gain and also generating ele... Read More about Design and optical characterisation of an efficient light trapping structure for dye-sensitized solar cell integrated windows.

Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting (2018)
Journal Article
Holland, S., Tuck, C., & Foster, T. (2018). Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting. Carbohydrate Polymers, 200, 229-238. https://doi.org/10.1016/j.carbpol.2018.07.064

Binder jetting is an additive manufacturing technique in which powdered material is sequentially laid down and printed on by an ink binder, in a selective manner, to form a 3D object. Unfortunately work in this area relevant to food materials is larg... Read More about Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting.

Band gap behavior of optimal one-dimensional composite structures with an additive manufactured stiffener (2018)
Journal Article
Ampatzidis, T., Leach, R. K., Tuck, C., & Chronopoulos, D. (2018). Band gap behavior of optimal one-dimensional composite structures with an additive manufactured stiffener. Composites Part B: Engineering, 153, https://doi.org/10.1016/j.compositesb.2018.07.012

In this work, the banded behaviour of composite one-dimensional structures with an additive manufactured stiffener is examined. A finite element method is used to calculate the stiffness, mass and damping matrices, and periodic structure theory is us... Read More about Band gap behavior of optimal one-dimensional composite structures with an additive manufactured stiffener.

A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks (2018)
Journal Article
Simonelli, M., Aboulkhair, N. T., Cohen, P., Murray, J. W., Clare, A. T., Tuck, C., & Hague, R. J. (in press). A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks. Materials Characterization, https://doi.org/10.1016/j.matchar.2018.05.039

In-situ alloying within laser powder-bed fusion, specifically Selective Laser Melting (SLM), has been investigated for the formulation of novel alloys from elemental powders to extend the benefits offered by these technologies. Inadequate preparation... Read More about A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks.

Scanning photocurrent microscopy of 3D printed light trapping structures in dye-sensitized solar cells (2018)
Journal Article
Knott, A. N., Makarovsky, O., O’Shea, P., Tuck, C., & Wu, Y. (2018). Scanning photocurrent microscopy of 3D printed light trapping structures in dye-sensitized solar cells. Solar Energy Materials and Solar Cells, 180, https://doi.org/10.1016/j.solmat.2018.02.028

Converting solar energy directly into electricity as a clean and renewable energy resource is immensely important to solving the energy crisis and environmental pollution problems induced by the consumption of fossil fuels. Dye-sensitized solar cells... Read More about Scanning photocurrent microscopy of 3D printed light trapping structures in dye-sensitized solar cells.

Fluid gels: a new feedstock for high viscosity jetting (2018)
Journal Article
Holland, S., Tuck, C., & Foster, T. (2018). Fluid gels: a new feedstock for high viscosity jetting. Food Biophysics, 13(2), https://doi.org/10.1007/s11483-018-9523-x

Suspensions of gel particles which are pourable or spoonable at room temperature can be created by shearing a gelling biopolymer through its gelation (thermal or ion mediated) rather than allowing quiescent cooling – thus the term ‘fluid gel’ may be... Read More about Fluid gels: a new feedstock for high viscosity jetting.

Creep behaviour of inconel 718 processed by laser powder bed fusion (2018)
Journal Article
Xu, Z., Hyde, C., Tuck, C., & Clare, A. (2018). Creep behaviour of inconel 718 processed by laser powder bed fusion. Journal of Materials Processing Technology, 256, https://doi.org/10.1016/j.jmatprotec.2018.01.040

Additive manufacturing lends itself well to the manufacture of aerospace parts due to the high complexity and small volume of many components found in modern aero engines. By exploiting additive manufacturing design freedoms, enhanced part functional... Read More about Creep behaviour of inconel 718 processed by laser powder bed fusion.

Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing (2017)
Presentation / Conference Contribution
Xu, Z., Hyde, C. J., Thompson, A., Leach, R. K., Maskery, I., Tuck, C., & Clare, A. T. (2017). Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing.

The mechanical performance of additively manufactured (AM) components remains an issue, limiting the implementation of AM technologies. In this work, a new method is presented, to examine the evolution of defects in an Inconel 718 two-bar test specim... Read More about Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing.

3D reactive inkjet printing of polydimethylsiloxane (2017)
Journal Article
Sturgess, C., Tuck, C. J., Ashcroft, I. A., & Wildman, R. D. (2017). 3D reactive inkjet printing of polydimethylsiloxane. Journal of Materials Chemistry C, 5(37), 9733-9745. https://doi.org/10.1039/c7tc02412f

© 2017 The Royal Society of Chemistry. Material jetting is a process whereby liquid material can be deposited onto a substrate to solidify. Through a process of progressive additional layers, this deposition can then be used to produce 3D structures.... Read More about 3D reactive inkjet printing of polydimethylsiloxane.

Valorisation of lignin by depolymerisation and fractionation using supercritical fluids and conventional solvents (2017)
Journal Article
Perez, E., Tuck, C. O., & Poliakoff, M. (in press). Valorisation of lignin by depolymerisation and fractionation using supercritical fluids and conventional solvents. Journal of Supercritical Fluids, https://doi.org/10.1016/j.supflu.2017.07.033

A procedure for Lignosulphonate valorisation is investigated. An attempt has been made to obtain diverse value-added products maximizing the atom economy. This procedure is carried in sequential steps starting with an oxidative depolymerization in su... Read More about Valorisation of lignin by depolymerisation and fractionation using supercritical fluids and conventional solvents.

Staged thermomechanical testing of nickel superalloys produced by selective laser melting (2017)
Journal Article
Xu, Z., Hyde, C. J., Thompson, A., Leach, R. K., Maskery, I., Tuck, C., & Clare, A. T. (2017). Staged thermomechanical testing of nickel superalloys produced by selective laser melting. Materials and Design, 133, 520-527. https://doi.org/10.1016/j.matdes.2017.08.009

The creep performance of additively manufactured components remains an issue before additive manufacturing can be put fully implemented. In this study, Inconel 718 two-bar specimens are produced by selective laser melting and subjected to a ‘staged’... Read More about Staged thermomechanical testing of nickel superalloys produced by selective laser melting.

Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM (2017)
Journal Article
Lemke, J., Simonelli, M., Garibaldi, M., Ashcroft, I., Hague, R., Vedani, M., …Tuck, C. (2017). Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM. Journal of Alloys and Compounds, 722, 293-301. https://doi.org/10.1016/j.jallcom.2017.06.085

Innovative Additive Manufacturing (AM) technologies like Selective Laser Melting (SLM) could prove to be efficient for the processing of brittle silicon steel (Fe-Si) with high silicon content. This research elucidates the effects of heat-treatment o... Read More about Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM.

A novel approach to design lesion-specific stents for minimum recoil (2016)
Journal Article
Farhan Khan, M., Brackett, D., Ashcroft, I., Tuck, C., & Wildman, R. D. (in press). A novel approach to design lesion-specific stents for minimum recoil. Journal of Medical Devices, 11(1), Article 011001. https://doi.org/10.1115/1.4034880

Stent geometries are obtained by topology optimization for minimized compliance under different stenosis levels and plaque material types. Three levels of stenosis by cross-sectional area, i.e., 30%, 40%, and 50% and three different plaque material p... Read More about A novel approach to design lesion-specific stents for minimum recoil.

A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale (2016)
Journal Article
Chen, X., Ashcroft, I., Wildman, R. D., & Tuck, C. (2017). A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale. International Journal of Solids and Structures, 104-105, 25-34. https://doi.org/10.1016/j.ijsolstr.2016.11.004

Material properties such as hardness can be dependent on the size of the indentation load when that load is small, a phenomenon known as the indentation size effect (ISE). In this work an inverse finite element method (IFEM) is used to investigate th... Read More about A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale.

A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing (2016)
Journal Article
He, Y., Tuck, C., Prina, E., Kilsby, S., Christie, S. D., Edmondson, S., …Wildman, R. D. (2017). A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105(6), 1645-1657. https://doi.org/10.1002/jbm.b.33699

A new type of photocrosslinkable polycaprolactone
(PCL)-based ink that is suitable for three-dimensional (3D) inkjet printing has been developed. Photocrosslinkable PCL dimethylacrylate was synthesized and mixed with poly(ethylene glycol) diacrylate... Read More about A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing.

Surface microstructuring to modify wettability for 3D printing of nano-filled inks (2016)
Journal Article
Vafaei, S., Tuck, C., Ashcroft, I., & Wildman, R. D. (2016). Surface microstructuring to modify wettability for 3D printing of nano-filled inks. Chemical Engineering Research and Design, 109, https://doi.org/10.1016/j.cherd.2016.02.004

This paper investigates the effect of surface wettability on the cross-sectional profiles of printed nanofluid inks which can have a significant role on conductivity of printed lines that are used in the production of printed electronics. Glass subst... Read More about Surface microstructuring to modify wettability for 3D printing of nano-filled inks.

Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing? (2016)
Journal Article
Baumers, M., Tuck, C., Wildman, R. D., Ashcroft, I., & Hague, R. J. (in press). Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing?. Journal of Industrial Ecology, https://doi.org/10.1111/jiec.12397

Additive manufacturing (AM) technology is capable of building up component geometry in a layer-by-layer process, entirely without tools, molds, or dies. One advantage of the approach is that it is capable of efficiently creating complex product geome... Read More about Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing?.