All Outputs (175)

A modular speed-drooped system for high reliability integrated modular motor drives (2016)
Journal Article

Future transportation challenges include a considerable reduction in pollutant emissions at a time when significant increase in demand is predicted. One of the enabling solutions is the electrification of transport systems as this should lead to impr... Read More about A modular speed-drooped system for high reliability integrated modular motor drives.

Impact of Soft Magnetic Material on Design of High-Speed Permanent-Magnet Machines (2016)
Journal Article

© 2016 IEEE. This paper investigates the effect of two soft magnetic materials on a high-speed machine design, namely, 6.5% silicon steel and cobalt-iron alloy. The effect of design parameters on the machine performance as an aircraft starter-generat... Read More about Impact of Soft Magnetic Material on Design of High-Speed Permanent-Magnet Machines.

Non-linear circuit based model of PMSM under inter-turn fault: a simple approach based on healthy machine data (2016)
Journal Article

The paper proposes a fast dynamic mathematical model to evaluate the performances of saturated permanent magnet synchronous machines (PMSM) under stator winding’s inter turn fault. The parameters of the model can be determined using only manufacturer... Read More about Non-linear circuit based model of PMSM under inter-turn fault: a simple approach based on healthy machine data.

Model predictive control for a dual active bridge inverter with a floating bridge (2016)
Journal Article

This paper presents a Model Predictive Control technique applied to a dual active bridge inverter where one of the bridges is floating. The proposed floating bridge topology eliminates the need for isolation transformer in a dual inverter system and... Read More about Model predictive control for a dual active bridge inverter with a floating bridge.

A multi-level converter with a floating bridge for open-ended winding motor drive applications (2016)
Journal Article

This paper presents a dual three phase open end winding induction motor drive. The drive consists of a three phase induction machine with open stator phase windings and dual bridge inverter supplied from a single DC voltage source. To achieve multi-l... Read More about A multi-level converter with a floating bridge for open-ended winding motor drive applications.

Evaluation of saliency tracking as an alternative for health monitoring in PMSM-drives under nonstationary conditions (2016)
Journal Article

This paper evaluates the capability of saliency tracking to assess the health condition of permanent magnet synchronous motor (PMSM) drives operating under nonstationary conditions. The evaluated scheme is based on saliency tracking methods, which ar... Read More about Evaluation of saliency tracking as an alternative for health monitoring in PMSM-drives under nonstationary conditions.

Integrated motor drives: state of the art and future trends (2016)
Journal Article

With increased need for high power density, high efficiency and high temperature capabilities in aerospace and automotive applications, integrated motor drives (IMD) offers a potential solution. However, close physical integration of the converter an... Read More about Integrated motor drives: state of the art and future trends.

Multi-objective optimization of a magnetically levitated planar motor with multi-layer windings (2016)
Journal Article

In this paper, a novel magnetically levitated coreless planar motor with three-layer orthogonal overlapping windings is shown to have higher power density and higher space utilization compared to other coreless planar motors. In order to achieve maxi... Read More about Multi-objective optimization of a magnetically levitated planar motor with multi-layer windings.

Condition monitoring approach for permanent magnet synchronous motor drives based on the INFORM method (2016)
Journal Article

This paper proposes a monitoring scheme based on saliency tracking to assess the health condition of PMSM drives operating under non stationary conditions. The evaluated scheme is based on the INFORM methodology, which is associated to the accurate s... Read More about Condition monitoring approach for permanent magnet synchronous motor drives based on the INFORM method.

An investigation into the geometric parameters affecting field uniformity in four pole magnetisers (2015)
Journal Article

In recent years, the field-metric method for measuring the joule losses set up in an electrical steel laminate when subjected to a rotating field has gained popularity. The ideal geometry of the magnetiser required to set up such a field is still how... Read More about An investigation into the geometric parameters affecting field uniformity in four pole magnetisers.

The effects of pushback delays on airport ground movement (2015)
Journal Article

With the constant increase in air traffic, airports are facing capacity problems. Optimisation methods for specific airport processes are starting to be increasingly utilised by many large airports. However, many processes do happen in parallel, and... Read More about The effects of pushback delays on airport ground movement.

Impact of Slot/Pole Combination on Inter-Turn Short-Circuit Current in Fault-Tolerant Permanent Magnet Machines (2015)
Journal Article

This paper investigates the influence of the slot/pole (S/P) combination on inter-turn short-circuit (SC) current in fault-tolerant permanent magnet (FT-PM) machines. A 2-D sub-domain field computational model with multi-objective genetic algorithm i... Read More about Impact of Slot/Pole Combination on Inter-Turn Short-Circuit Current in Fault-Tolerant Permanent Magnet Machines.

Modeling and analysis of eddy current losses in permanent magnet machines with multi-stranded bundle conductors (2015)
Journal Article

This paper investigates the influence of eddy current losses in multi-stranded bundle conductors employed in out-runner permanent magnet machines, by adopting an analytical model. The analytical model is based on a sub-domain field model that solves... Read More about Modeling and analysis of eddy current losses in permanent magnet machines with multi-stranded bundle conductors.

Turn-turn short circuit fault management in permanent magnet machines (2015)
Journal Article

This paper presents a systematic study on turn-turn short circuit fault and ways to manage them to provide a basis for comparison of the various options available. The possible methods to reduce the likelihood of the winding SC fault and the fault mi... Read More about Turn-turn short circuit fault management in permanent magnet machines.

Computation of wound rotor induction machines based on coupled finite elements and circuit equation under a first space harmonic approximation (2015)
Journal Article

The paper presents a fast method to compute wound rotor induction machines in steady state. Coupled time-harmonic FE-circuit equation are used under a first space harmonic approximation for the air-gap magnetic field. It is shown that only 4 magnetos... Read More about Computation of wound rotor induction machines based on coupled finite elements and circuit equation under a first space harmonic approximation.

Development of an axial flux MEMS BLDC micromotor with increased efficiency and power density (2015)
Journal Article

This paper presents a rigorous design and optimization of an axial flux microelectromechanical systems (MEMS) brushless dc (BLDC) micromotor with dual rotor improving both efficiency and power density with an external diameter of only around 10 mm. T... Read More about Development of an axial flux MEMS BLDC micromotor with increased efficiency and power density.

Control integrated studies on high speed permanent magnetic generators system (2015)
Journal Article

The power converter and its control system has great impact on the behavior of the high speed permanent magnet generator system (HSPGS) due to the high operating frequency, and therefore should be investigated in the design and research on the HSPGS.... Read More about Control integrated studies on high speed permanent magnetic generators system.

Design considerations for the tooth shoe shape for high-speed permanent magnet generators (2015)
Journal Article

This paper presents a study of the effects that the shoe shape of the teeth of electrical machines has on the performance and losses. This is done by considering a concentrated wound, high-speed permanent magnet generator. The paper investigates the... Read More about Design considerations for the tooth shoe shape for high-speed permanent magnet generators.

Analysis and optimization of a double-sided air-cored tubular generator (2015)
Journal Article

In this paper, the design and development of a double-sided air-cored tubular generator (DSTG) is presented. The characteristics of air-cored slot-less structures are investigated in terms of power density and efficiency. This is highly desirable for... Read More about Analysis and optimization of a double-sided air-cored tubular generator.

Magnetically geared induction machines (2015)
Journal Article

A wound-rotor induction machine is artfully coupled to a magnetic gear to achieve a high-torque-density drive system called magnetically geared induction machine (MaGIM). The high-speed rotor of MaGIM is common to both the machine and gear sides. A r... Read More about Magnetically geared induction machines.