All Outputs (19)

Axial position estimation of conical shaped motor for green taxiing application (2016)
Conference Proceeding

This paper considers the possibility of adopting a conical shaped motor for Green Taxiing (GT) application. This topology of motor has been selected in order to obviate the presence of external declutching system (i.e. mechanical or electromagnetic c... Read More about Axial position estimation of conical shaped motor for green taxiing application.

Active Magnetic Bearing system design featuring a predictive current control (2016)
Conference Proceeding

Active Magnetic Bearing (AMB) technology is becoming attractive for several reasons such as high speed operations, high reliability and vibrations exemption. Moreover, AMB can behave as active vibration dampers and provide a real-time control of the... Read More about Active Magnetic Bearing system design featuring a predictive current control.

History and recent advancements of electric propulsion and integrated electrical power systems for commercial & naval vessels (2016)
Conference Proceeding

Due to developments in power electronics, electric machines, energy storage and control, electric propulsion and integrated electrical power systems have become major trends for commercial and naval vessels. This is mainly due to the fact that the us... Read More about History and recent advancements of electric propulsion and integrated electrical power systems for commercial & naval vessels.

Lifetime consumption and degradation analysis of the winding insulation of electrical machines (2016)
Conference Proceeding

In this paper, a novel multi-stress model which estimates the lifetime of the winding insulation relative to its duty cycle is proposed and investigated. With an adequate implementation of this model, then an electrical machine can be designed not on... Read More about Lifetime consumption and degradation analysis of the winding insulation of electrical machines.

Assessment of cooling methods for increased power density in electrical machines (2016)
Conference Proceeding

A comprehensive thermal analysis of three different electrical machines is presented, with a view of identifying design aspects that can be exploited to achieve higher power density. A review of some novel cooling methods is initially made. Following... Read More about Assessment of cooling methods for increased power density in electrical machines.

Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets (2016)
Conference Proceeding

This paper details the design process of a high performance electrical machine with the objective of achieving US Department of Energy FreedomCar 2020 targets, namely meeting the high speed efficiency requirement without sacrificing performance elsew... Read More about Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets.

Novel integrative options for passive filter inductor in high speed AC drives (2016)
Conference Proceeding

This paper presents novel integration options for passive inductor which include: motor-shaped rotational and motor-shaped rotor-less inductor for high speed motor drive system. The novel options have been designed and their performance is compared w... Read More about Novel integrative options for passive filter inductor in high speed AC drives.

High speed drives review: machines, converters and applications (2016)
Conference Proceeding

The development of new power electronic device and high performance magnetic materials are the main technological factors that have led both industries and research community to focus their attention on high speed electrical drives. Several papers ha... Read More about High speed drives review: machines, converters and applications.

Trade-off analysis and design of a high power density PM machine for flooded industrial pump (2016)
Conference Proceeding

This paper presents the trade-off analysis and design of a high power-density machine for industrial pump applications. The developed permanent magnet synchronous machine drives an electric, oil flooded pump. Different slot/pole combination and windi... Read More about Trade-off analysis and design of a high power density PM machine for flooded industrial pump.

2-D analytical model for dual-stator machines with permanent magnets (2016)
Conference Proceeding

This paper proposes an analytical model that considers the torque characteristics and results in an optimum geometry for dual-stator synchronous machines with permanent magnets. The distribution of the magnetic field in the air gap is obtained by sol... Read More about 2-D analytical model for dual-stator machines with permanent magnets.

Stator and rotor vent modelling in a MVA rated synchronous machine (2016)
Conference Proceeding

An investigation into the solution dependence of a conjugate heat transfer computational fluid dynamics (CFD) model of a synchronous generator, with respect to meshing, has been carried out. Utilising CFD as a tool for investigating the airflow and t... Read More about Stator and rotor vent modelling in a MVA rated synchronous machine.

Structural design optimization of a high speed synchronous reluctance machine (2016)
Conference Proceeding

Synchronous reluctance machines, including the permanent magnet assisted variants are competitive motor topologies if the application requires high efficiency and a cost effective solution with a high flux weakening capability. However, increasing sp... Read More about Structural design optimization of a high speed synchronous reluctance machine.

Distributed current control for multi-three phase synchronous machines in fault conditions (2016)
Conference Proceeding

Among challenges and requirements of on-going electrification process and future transportation systems there is demand for arrangements with both increased fault tolerance and reliability. Next aerospace, power-train and automotive systems exploitin... Read More about Distributed current control for multi-three phase synchronous machines in fault conditions.

Thermal management of a permanent magnet motor for an directly coupled pump (2016)
Conference Proceeding

A high speed permanent magnet motor is designed for a flooded industrial pump. Oil in the pump is used to cool the motor. Due to the limitation of space and mass requirement for the application, thermal management is one of the main challenges. This... Read More about Thermal management of a permanent magnet motor for an directly coupled pump.

Short term duty electrical machines (2016)
Conference Proceeding

This paper presents a design of a short term duty electrical machine working in an extreme environment consisting of 80oC ambient temperature and altitudes of over 30,000m. Higher power density is a key factor in the design wherein the machine’s oper... Read More about Short term duty electrical machines.

Design and optimization of a high power density machine for flooded industrial pump (2016)
Conference Proceeding

This paper presents the design optimization procedure of a high power-density, permanent magnet synchronous machine for industrial pump applications. The designed machine drives an electric, oil flooded pump. In order to achieve higher torque-density... Read More about Design and optimization of a high power density machine for flooded industrial pump.

Radial force control of multi-sector permanent magnet machines (2016)
Conference Proceeding

The paper presents an alternative radial force control technique for a Multi-Sector Permanent Magnet machine (MSPM). Radial force control has been widely investigated for a variety of bearingless machines and can be also applied to conventional PMSM... Read More about Radial force control of multi-sector permanent magnet machines.

The importance of considering pushback time and arrivals when routing departures on the ground at airports (2016)
Conference Proceeding

With the constant increase in air traffic, airports are facing capacity problems. Many airports are increasingly interested in utilising optimisation methods for specific airport processes. However, many such processes do happen in parallel, and maxi... Read More about The importance of considering pushback time and arrivals when routing departures on the ground at airports.

Damper cage loss reduction and no-load voltage THD improvements in salient-pole synchronous generators (2016)
Conference Proceeding

Salient-pole synchronous generators (SG) have a long history of utilization as reliable power generation systems. Important aspects of such generators include a high power-to-weight ratio, high efficiency and a low cost per kVA output [1]. Another cr... Read More about Damper cage loss reduction and no-load voltage THD improvements in salient-pole synchronous generators.