Outputs (36)

Application of ray-tracing to interpreting beam prints from fibre laser cutting (2017)
Journal Article
Alotaibi, M., Atiyah, H., MacKenzie, R., & Voisey, K. (2017). Application of ray-tracing to interpreting beam prints from fibre laser cutting. Lasers in Engineering, 39(1-2),

2D ray-tracing has been used to investigate the influence of inclined cutting front and the cutting edge on the exiting, surplus, laser beam while cutting 6 mm mild steel with a fibre laser, wavelength = 1070 nm. The ray-tracing model, which assumed... Read More about Application of ray-tracing to interpreting beam prints from fibre laser cutting.

Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry (2017)
Journal Article
Barman, K., Shipway, P., Voisey, K., & Pattinson, G. (2017). Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry. Progress in Organic Coatings, 105, https://doi.org/10.1016/j.porgcoat.2016.12.022

Dry film lubricant (DFL) coatings are widely used to reduce coefficients of friction and damage in highly loaded contacts. This work investigates the behaviour of a commercially available MoS2-based DFL in a cylinder-on-flat contact geometry with a f... Read More about Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry.

Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications (2016)
Journal Article
Qian, L., Xu, F., Voisey, K., Nekouie, V., Zhou, Z., Silberschmidt, V. V., & Hou, X. (2017). Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications. Surface and Coatings Technology, 311, https://doi.org/10.1016/j.surfcoat.2016.12.106

ZrO2 nano-particles were incorporated into electro-deposited PtAl coatings in an attempt to enhance their performance by exploiting the effect of reactive element oxides. PtAl coatings with and without ZrO2 particles were deposited onto three commerc... Read More about Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications.

Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: microstructure and high temperature oxidation (2016)
Journal Article
Song, B., Pala, Z., Voisey, K., & Hussain, T. (in press). Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: microstructure and high temperature oxidation. Surface and Coatings Technology, https://doi.org/10.1016/j.surfcoat.2016.07.046

Ni50Cr thermally sprayed coatings are widely used for high temperature oxidation and corrosion in thermal power plants. In this study, a commercially available gas atomised Ni50Cr powder was sprayed onto a power plant alloy (ASME P92) using both gas... Read More about Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: microstructure and high temperature oxidation.

Laser cladding of Ni50Cr: A parametric and dilution study (2016)
Presentation / Conference Contribution
Song, B., Hussain, T., & Voisey, K. T. (2016). Laser cladding of Ni50Cr: A parametric and dilution study. . https://doi.org/10.1016/j.phpro.2016.08.072

© 2016 The Authors. The increasing use of biomass as a fuel is leading to higher fireside corrosion of the heat exchangers in boilers due to the high chlorine and alkali metal content in the fuel. Laser cladding of Ni50Cr is a promising technique to... Read More about Laser cladding of Ni50Cr: A parametric and dilution study.

Laser drilling of via micro-holes in single-crystal semiconductor substrates using a 1070nm fibre laser with millisecond pulse widths (2015)
Presentation / Conference Contribution
Maclean, J. O., Hodson, J. R., & Voisey, K. T. (2015, March). Laser drilling of via micro-holes in single-crystal semiconductor substrates using a 1070nm fibre laser with millisecond pulse widths. Presented at Industrial Laser Applications Symposium 2015, Kenilworth, United Kingdom

© 2015 SPIE. Micro-machining of semiconductors is relevant to fabrication challenges within the semiconductor industry. For via holes for solar cells, laser drilling potentially avoids deep plasma etching which requires sophisticated equipment and co... Read More about Laser drilling of via micro-holes in single-crystal semiconductor substrates using a 1070nm fibre laser with millisecond pulse widths.

Effect of surface conditions on internal oxidation and nitridation of HVOF MCrAlY coatings (2015)
Journal Article
Chen, H., McCartney, D., & Voisey, K. (in press). Effect of surface conditions on internal oxidation and nitridation of HVOF MCrAlY coatings. Materials at High Temperatures, 32(1-2), https://doi.org/10.1179/0960340914Z.000000000103

This study deals with the isothermal oxidation behaviour of high velocity oxy-fuel sprayed MCrAlY coatings. Both free-standing coatings and coatings attached to IN738 and CMSX4 substrates undergo isothermal oxidation at 1100°C for up to 100h. The eff... Read More about Effect of surface conditions on internal oxidation and nitridation of HVOF MCrAlY coatings.

Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy (2014)
Journal Article
Li, C., Murray, J., Voisey, K., Clare, A., & McCartney, D. (2014). Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy. Applied Surface Science, 289, https://doi.org/10.1016/j.apsusc.2013.10.140

Laser surface melting (LSM) pre-treatment was conducted before large area electron beam (LAEB) treatment in an attempt to eliminate the cracking of the amorphous layer. In our previous work, LAEB treatment successfully generated an amorphous layer on... Read More about Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy.

Effect of Q-switched laser surface texturing of titanium on osteoblast cell response (2014)
Journal Article
Voisey, K., Scotchford, C., Martin, L., & Gill, H. (2014). Effect of Q-switched laser surface texturing of titanium on osteoblast cell response. Physics Procedia, 56, https://doi.org/10.1016/j.phpro.2014.08.027

Titanium and its alloys are important biomedical materials. It is known that the surface texture of implanted medical devices affects cell response. Control of cell response has the potential to enhance fixation of implants into bone and, in other ap... Read More about Effect of Q-switched laser surface texturing of titanium on osteoblast cell response.

Neutron strain scanning of fibre and diode laser welds in stainless steel and Ti6Al4V (2014)
Journal Article
Voisey, K., Folkes, J., Srithorn, J., & Hughes, D. (2014). Neutron strain scanning of fibre and diode laser welds in stainless steel and Ti6Al4V. Physics Procedia, 56, https://doi.org/10.1016/j.phpro.2014.08.051

Fibre lasers provide an unprecedented combination of high beam quality, brightness and low cost. Fibre laser beams can provide an exceptionally high power density beam with a relatively large depth of focus. Compared to more established laser welding... Read More about Neutron strain scanning of fibre and diode laser welds in stainless steel and Ti6Al4V.