Professor CHRISTOPHER GERADA's Outputs (52)

Enhanced power sharing transient with droop controllers for multi-three-phase synchronous electrical machines (2018)
Journal Article
Galassini, A., Costabeber, A., Degano, M., Gerada, C., Tessarolo, A., & Menis, R. (2019). Enhanced power sharing transient with droop controllers for multi-three-phase synchronous electrical machines. IEEE Transactions on Industrial Electronics, 66(7), 5600-5610. https://doi.org/10.1109/tie.2018.2868029

This paper presents a droop-based dis- tributed control strategy for multi-three-phase machines that provides augmented controllability during power shar- ing transients. The proposed strategy is able to mitigate the mutual interactions among differe... Read More about Enhanced power sharing transient with droop controllers for multi-three-phase synchronous electrical machines.

Double Rotor Synchronous Reluctance Machine: Analysis towards Torque Capability (2018)
Presentation / Conference Contribution
Al-Ani, M., Mahmoud, H., Degano, M., & Gerada, C. (2018, September). Double Rotor Synchronous Reluctance Machine: Analysis towards Torque Capability. Presented at 23rd International Conference on Electrical Machines (ICEM 2018), Alexandroupoli, Greece

© 2018 IEEE. This paper presents a comparative analysis of double rotor synchronous reluctance machines. Different topologies of the proposed machine have been investigated, such as double rotor with double-sided stator and double rotor with single-s... Read More about Double Rotor Synchronous Reluctance Machine: Analysis towards Torque Capability.

Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM (2018)
Presentation / Conference Contribution
Al-Timimy, A., Giangrande, P., Degano, M., Galea, M., & Gerada, C. (2018, September). Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM. Presented at 23rd International Conference on Electrical Machines (ICEM 2018), Alexandroupoli, Greece

This paper presents a detailed investigation of AC copper losses in high-speed high-power density permanent magnet synchronous machine. For parallel strands winding, it is not easy to accurately estimate the AC copper losses using finite element mode... Read More about Investigation of AC Copper and Iron Losses in High-Speed High-Power Density PMSM.

Mass Production Costing of Induction Machines for Automotive Applications (2018)
Presentation / Conference Contribution
Hundak, V., Cox, T., Vakil, G., & Gerada, C. (2018, June). Mass Production Costing of Induction Machines for Automotive Applications. Presented at 2018 IEEE Transportation and Electrification Conference and Expo (ITEC), Long Beach, CA, USA

Cost is one of the key parameters of electric machines designed for automotive applications. In order to keep manufacturing cost low, it is desirable to estimate the manufacturing cost of the machine in the early stages of the design process. For thi... Read More about Mass Production Costing of Induction Machines for Automotive Applications.

Design of an Integrated Inductor for 45kW Aerospace Starter-Generator (2018)
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Quadri, S. Q., Wheeler, P., & Patel, C. (2018, June). Design of an Integrated Inductor for 45kW Aerospace Starter-Generator. Presented at 2018 IEEE Transportation and Electrification Conference and Expo (ITEC), Long, CA, USA

A close physical and functional integration of passive components is required to make an efficient and power dense overall system. Such power dense systems are a prerequisite in aerospace and marine applications. This paper presents a design of an in... Read More about Design of an Integrated Inductor for 45kW Aerospace Starter-Generator.

Electrical Machine Rotor Shielding for Low Cost Electrical Drive (2018)
Presentation / Conference Contribution
Al-Ani, M., Vakil, G., & Gerada, C. (2018, June). Electrical Machine Rotor Shielding for Low Cost Electrical Drive. Presented at 2018 IEEE Transportation and Electrification Conference and Expo, ITEC 2018, Long Beach, California, USA

Electrical machine rotor shielding has been proposed for high-speed electrical machines, i.e. ≥50krpm, where a smooth current waveform becomes difficult and costly to generate due to the required high switching frequency. The rotor shielding is used... Read More about Electrical Machine Rotor Shielding for Low Cost Electrical Drive.

A methodology to remove stator skew in small-medium size synchronous generators via innovative damper cage designs (2018)
Journal Article
Nuzzo, S., Bolognesi, P., Vakil, G., Fallows, D., Gerada, C., Brown, N. L., & Galea, M. (2019). A methodology to remove stator skew in small-medium size synchronous generators via innovative damper cage designs. IEEE Transactions on Industrial Electronics, 66(6), 4926-4307. https://doi.org/10.1109/tie.2018.2864699

This paper proposes and investigates an innovative methodology that can have a significant impact on the market potential of wound field, small-medium size synchronous generators. The technique proposed here is aimed at removing the need for the trad... Read More about A methodology to remove stator skew in small-medium size synchronous generators via innovative damper cage designs.

Development of aircraft electric starter-generator system based-on active rectification technology (2018)
Journal Article
Bozhko, S., Yang, T., Le Peuvedic, J.-M., Arumugam, P., Degano, M., La Rocca, A., Xu, Z., Rashed, M., Fernando, W., Hill, C. I., Eastwick, C., Pickering, S., Gerada, C., & Wheeler, P. (2018). Development of aircraft electric starter-generator system based-on active rectification technology. IEEE Transactions on Transportation Electrification, 4(4), 985-996. https://doi.org/10.1109/TTE.2018.2863031

More-electric aircraft (MEA) has become a dominant trend for modern aircraft. On-board MEA, many functions, which are conventionally driven by pneumatic and hydraulic power, are replaced with electrical subsystems. Starting aircraft engines with an e... Read More about Development of aircraft electric starter-generator system based-on active rectification technology.

Response to Discussion of “A modular speed-drooped system for high reliability integrated modular motor drives” (2018)
Journal Article
Galassini, A., Costabeber, A., Degano, M., Gerada, C., Buticchi, G., & Barater, D. (2018). Response to Discussion of “A modular speed-drooped system for high reliability integrated modular motor drives”. IEEE Transactions on Industry Applications, 54(5), 4994-4995. https://doi.org/10.1109/tia.2018.2858191

Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle (2018)
Presentation / Conference Contribution
Talha, A., Vakil, G., Cox, T., & Gerada, C. (2018, April). Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle. Presented at PEMD 2018 - 9th International Conference on Power Electronics, Machines and Drives

A switched reluctance machine (SRM) is very robust and capable to perform well under harsh conditions. It is simple in construction and avoids the use of magnets so it is cheap to manufacture. The powertrain of a hybrid vehicle presents challenging c... Read More about Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle.

Dielectric breakdown of alumina thin films produced by pulsed direct current magnetron sputtering (2018)
Journal Article
Hanby, B. V., Stuart, B. W., Grant, C., Moffat, J., Blissett, J., Gerada, C., Gimeno-Fabra, M., & Grant, D. M. (2018). Dielectric breakdown of alumina thin films produced by pulsed direct current magnetron sputtering. Thin Solid Films, 662, 145-154. https://doi.org/10.1016/j.tsf.2018.07.004

Alumina films (~2 μm thick) were deposited with a mixed Cu/Al interlayer onto copper. Direct current (DC)/Pulsed DC (PDC) magnetron sputtering techniques were independently compared for reactive alumina sputtering. In DC sputtered films, elemental al... Read More about Dielectric breakdown of alumina thin films produced by pulsed direct current magnetron sputtering.

Performance Improvement of Bearingless Multisector PMSM With Optimal Robust Position Control (2018)
Journal Article
Valente, G., Formentini, A., Papini, L., Gerada, C., & Zanchetta, P. (2019). Performance Improvement of Bearingless Multisector PMSM With Optimal Robust Position Control. IEEE Transactions on Power Electronics, 34(4), 3575-3585. https://doi.org/10.1109/TPEL.2018.2853038

© 2018 IEEE. Bearingless machines are relatively new devices that consent to suspend and spin the rotor at the same time. They commonly rely on two independent sets of three-phase windings to achieve a decoupled torque and suspension force control. I... Read More about Performance Improvement of Bearingless Multisector PMSM With Optimal Robust Position Control.

A Smart Transformer-Rectifier Unit for the More Electric Aircraft (2018)
Presentation / Conference Contribution
Buticchi, G., Gerada, C., Ko, Y. J., & Liserre, M. (2018, June). A Smart Transformer-Rectifier Unit for the More Electric Aircraft. Presented at 2018 IEEE 27th International Symposium on Industrial Electronics (ISIE), Cairns, Australia

In the framework of the More Electric Aircraft (MEA), an efficient and flexible power distribution system is of paramount importance. Considering the presence of both AC and DC loads at multiple voltage levels, the distribution system of the most mod... Read More about A Smart Transformer-Rectifier Unit for the More Electric Aircraft.

Space Weather Prediction to Enhance the Reliability of the More Electric Aircraft (2018)
Presentation / Conference Contribution
Guo, J., Buticchi, G., & Gerada, C. (2018, June). Space Weather Prediction to Enhance the Reliability of the More Electric Aircraft. Presented at IEEE 27th International Symposium on Industrial Electronics (ISIE 2018 ), Cairns, Queensland, Australia

Power devices manufacturers know that electronic devices are susceptible to radiation events. Galactic Cosmic Rays (GCR) coming from space can interact with the earth atmosphere, generating secondary particles (electrons, neutrons, protons) that can... Read More about Space Weather Prediction to Enhance the Reliability of the More Electric Aircraft.

Eccentric reluctance and permanent magnets synchronous machines comparison (2018)
Journal Article
Mahmoud, H., Bianchi, N., Degano, M., Al-Ani, M., & Gerada, C. (2018). Eccentric reluctance and permanent magnets synchronous machines comparison. IEEE Transactions on Industry Applications, 54(6), 5760-5771. https://doi.org/10.1109/TIA.2018.2848278

This paper deals with a comparative study between reluctance (REL), permanent magnet assisted reluctance (PMAREL), and surface mounted permanent magnet synchronous machines with rotor eccentricity. Static, dynamic, and combined eccentricity cases are... Read More about Eccentric reluctance and permanent magnets synchronous machines comparison.

Novel core designs to miniaturise passive magnetic components (2018)
Presentation / Conference Contribution
Walker, A., Vakil, G., & Gerada, C. (2018, June). Novel core designs to miniaturise passive magnetic components. Presented at ITEC 2018

Converter sizes are often dominated by passive magnetic components. Passive magnetic component sizes are in turn limited by electromagnetic saturation and thermal limits. This paper covers two modifications to the air gaps of tape wound amorphous mag... Read More about Novel core designs to miniaturise passive magnetic components.

Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications (2018)
Journal Article
Zhao, W., Wang, X., Gerada, C., Zhang, H., Liu, C., & Wang, Y. (2018). Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications. IEEE Transactions on Magnetics, 54(11), Article 8106405. https://doi.org/10.1109/TMAG.2018.2835504

© 1965-2012 IEEE. High-speed permanent magnet synchronous machine (PMSM) can provide high power density and high efficiency, which is often highly desirable in high performance applications. A multi-physics optimization program based on the multi-obj... Read More about Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications.

A Modified Neutral Point Balancing Space Vector Modulation for Three-Level Neutral Point Clamped Converters in High-Speed Drives (2018)
Journal Article
Li, C., Yang, T., Kulsangcharoen, P., Lo Calzo, G., Bozhko, S., Gerada, C., & Wheeler, P. (2019). A Modified Neutral Point Balancing Space Vector Modulation for Three-Level Neutral Point Clamped Converters in High-Speed Drives. IEEE Transactions on Industrial Electronics, 66(2), 910-921. https://doi.org/10.1109/TIE.2018.2835372

© 2018 IEEE. This paper describes a high-performance neutral point voltage balancing technique for a neutral point clamped (NPC) converter. Conventional neutral point voltage balancing methods do not function well under low power factor, low pulse ra... Read More about A Modified Neutral Point Balancing Space Vector Modulation for Three-Level Neutral Point Clamped Converters in High-Speed Drives.

Power quality improvement of synchronous generators using an active power filter (2018)
Journal Article
Abu-Jalala, A.-H., Cox, T., Gerada, C., Rashed, M., Hamiti, T., & Brown, N. (2018). Power quality improvement of synchronous generators using an active power filter. IEEE Transactions on Industry Applications, 54(5), 4080-4090. https://doi.org/10.1109/TIA.2018.2828789

Active power filters (APF) are used to improve power quality and are commonly connected in parallel with the load at the point of common coupling (PCC). They are used to compensate for harmonics from nonlinear loads, for reactive power compensation a... Read More about Power quality improvement of synchronous generators using an active power filter.

A novel 24-slots14-poles fractional-slot concentrated winding topology with low space harmonics for electrical machines (2018)
Presentation / Conference Contribution
Zhu, S., Cox, T., Xu, Z., & Gerada, C. (2018, April). A novel 24-slots14-poles fractional-slot concentrated winding topology with low space harmonics for electrical machines. Presented at PEMD 2018 - 9th International Conference on Power Electronics, Machines and Drives

This paper proposes a novel winding layout for the machines with fractional-slot concentrated windings (FSCW) using a stator shifting concept and non-overlapping windings, with which all the non-working harmonics will be completely cancelled or signi... Read More about A novel 24-slots14-poles fractional-slot concentrated winding topology with low space harmonics for electrical machines.