Skip to main content

Research Repository

Advanced Search

Outputs (5)

Mapping the adaptive landscape of Batesian mimicry using 3D-printed stimuli (2025)
Journal Article
Taylor, C. H., Watson, D. J. G., Skelhorn, J., Bell, D., Burdett, S., Codyre, A., Cooley, K., Davies, J. R., Dawson, J. J., D’Cruz, T., Gandhi, S. R., Jackson, H. J., Lowe, R., Ogilvie, E., Pond, A. L., Rees, H., Richardson, J., Sains, J., Short, F., Brignell, C., …Reader, T. (2025). Mapping the adaptive landscape of Batesian mimicry using 3D-printed stimuli. Nature, https://doi.org/10.1038/s41586-025-09216-3

In a classic example of adaptation, harmless Batesian mimics gain protection from predators through resemblance to one or more unpalatable models. Mimics vary greatly in accuracy, and explaining the persistence of inaccurate mimics is an ongoing chal... Read More about Mapping the adaptive landscape of Batesian mimicry using 3D-printed stimuli.

The effect of inter- and intra-layer delay time on TPU parts fabricated by laser powder bed fusion (2025)
Journal Article
Connor, S., Goodridge, R., & Maskery, I. (2025). The effect of inter- and intra-layer delay time on TPU parts fabricated by laser powder bed fusion. Progress in Additive Manufacturing, 10, 5661-5674. https://doi.org/10.1007/s40964-024-00933-1

In polymer laser powder bed fusion (PBF-LB-P) techniques, such as laser sintering, the time between scanning a given point in one layer and the same x-y point in the next layer is known as the ‘inter-layer delay time’. Multiple parts are normally fab... Read More about The effect of inter- and intra-layer delay time on TPU parts fabricated by laser powder bed fusion.

The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting (2016)
Journal Article
Vaithilingam, J., Goodridge, R. D., Hague, R. J., Christie, S. D., & Edmondson, S. (2016). The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting. Journal of Materials Processing Technology, 232, https://doi.org/10.1016/j.jmatprotec.2016.01.022

Surface remelting/skin scanning of components is generally performed during the selective laser melting (SLM) process to improve the surface quality of a part. However, the chemical effects of surface remelting are not well understood. In this study,... Read More about The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting.

Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound (2014)
Journal Article
Vaithilingam, J., Kilsby, S., Goodridge, R. D., Christie, S. D., Edmondson, S., & Hague, R. J. (2015). Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound. Materials Science and Engineering: C, 46, 52-61. https://doi.org/10.1016/j.msec.2014.10.015

Surface modification of an implant with a biomolecule is used to improve its biocompatibility and to reduce post-implant complications. In this study, a novel approach has been used to functionalise phosphonic acid monolayers with a drug. Ti6Al4V com... Read More about Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound.

An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties (2014)
Journal Article
Ziegelmeier, S., Christou, P., Wöllecke, F., Tuck, C., Goodridge, R. D., Hague, R. J., Krampe, E., & Wintermantel, E. (2015). An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties. Journal of Materials Processing Technology, 215, https://doi.org/10.1016/j.jmatprotec.2014.07.029

The properties of parts manufactured by laser sintering (LS) are, amongst others, influenced by the packing and flow efficiencies of the powders being processed.

In particular, this study investigated the influence of the bulk and flow characteris... Read More about An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties.