All Outputs (23)

Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al-WS2 composite for enhanced tribological performance with wear track evolution analysis (2023)
Journal Article

Self-lubricating aluminium matrix composites with enhanced tribological properties are sought for weight critical applications. In previous studies, the Al composites incorporating the solid lubricant WS2 have been shown to reduce both the coefficien... Read More about Tailoring the in-situ formation of intermetallic phases in the self-lubricating Al-WS2 composite for enhanced tribological performance with wear track evolution analysis.

Atmospheric plasma spraying of ytterbium disilicate for abradable and environmental barrier coatings: A story of processing-microstructure relationships (2023)
Journal Article

Environmental barrier coatings (EBCs) are required to protect SiC based composites in high temperature, steam containing combustion environments found in the latest generation of high efficiency gas turbine aeroengines. Ytterbium disilicate (YbDS) ha... Read More about Atmospheric plasma spraying of ytterbium disilicate for abradable and environmental barrier coatings: A story of processing-microstructure relationships.

Highly Aligned Ni-Decorated GO–CNT Nanostructures in Epoxy with Enhanced Thermal and Electrical Properties (2022)
Journal Article

In this study, graphene oxide–carbon nanotubes nanostructures decorated with nickel nanoparticles (NiGNT) were prepared through the molecular-level-mixing method, followed by a reduction process, and then applied as reinforcements to enhance the epox... Read More about Highly Aligned Ni-Decorated GO–CNT Nanostructures in Epoxy with Enhanced Thermal and Electrical Properties.

Correction to: Thermal Spraying of Ultra-High Temperature Ceramics: A Review on Processing Routes and Performance (2022)
Journal Article

When originally published, the author list contained an incorrect initial for the fourth listed author. The name should have been published to read: R. G. Wellman. The original article has been corrected.

Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering (2022)
Journal Article

Self-lubricating aluminium-based composites reinforced with solid lubricants promise to meet the demand for lightweight materials in green tribological applications. The design advantages granted by additive manufacturing (AM) processes coupled with... Read More about Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering.

Functionalised SiO2 modified icephobic nanocomposite electrospun membranes for outdoor electromagnetic shielding applications (2022)
Journal Article

Outdoor electronic equipment such as signal stations, radar units, and cellular base stations would benefit from electromagnetic interference (EMI) shielding systems, but ice accretion on the surface of these facilities often causes critical challeng... Read More about Functionalised SiO2 modified icephobic nanocomposite electrospun membranes for outdoor electromagnetic shielding applications.

Enhanced thermal and electrical properties by Ag nanoparticles decorated GO-CNT nanostructures in PEEK composites (2021)
Journal Article

A nanostructure of graphene oxide (GO) and carbon nanotubes (CNTs) decorated with silver nanoparticles (AgGNT) has been prepared via a molecular-level-mixing (MLM) method followed by a subsequent freeze-drying and reduction process. The obtained well... Read More about Enhanced thermal and electrical properties by Ag nanoparticles decorated GO-CNT nanostructures in PEEK composites.

Thermally conductive poly(ether ether ketone)/boron nitride composites with low coefficient of thermal expansion (2021)
Journal Article

The substantial heat generation due to miniaturization and high-degree integration of electronic devices is one of the major issues to facilitate efficient thermal management in power electronics. Though epoxy-based composites have shown great intere... Read More about Thermally conductive poly(ether ether ketone)/boron nitride composites with low coefficient of thermal expansion.

Sodium Tungsten Oxide Bronze Nanowires Bundles in Adsorption of Methylene Blue Dye under UV and Visible Light Exposure (2021)
Journal Article

This paper describes the analysis and characterization of NayWOx bronze nanowires bundles and evaluation of their effective adsorption of methylene blue dye (MB). The Na-doped WOx bronze nanowires bundles were first synthesized via a simple solvother... Read More about Sodium Tungsten Oxide Bronze Nanowires Bundles in Adsorption of Methylene Blue Dye under UV and Visible Light Exposure.

Metallic skeleton promoted two-phase durable icephobic layers (2020)
Journal Article

Hypothesis: The accretion of ice on component surfaces often causes severe impacts or accidents in modern industries. Applying icephobic surface is considered as an effective solution to minimise the hazards. However, the durability of the current ic... Read More about Metallic skeleton promoted two-phase durable icephobic layers.

Efficient dye-removal via Ni-decorated graphene oxide-carbon nanotube nanocomposites (2020)
Journal Article

The nickel nanoparticles decorated graphene oxide-carbon nanotubes nanocomposite has been prepared through a novel molecular-level-mixing method followed by a freeze-drying and subsequent reduction process. The resulting products showed a well-disper... Read More about Efficient dye-removal via Ni-decorated graphene oxide-carbon nanotube nanocomposites.

Highly Ordered BN⊥–BN⊥ Stacking Structure for Improved Thermally Conductive Polymer Composites (2020)
Journal Article

The substantial heat generation in modern electronic devices is one of the major issues requiring efficient thermal management. This work demonstrates a novel concept for the design of thermally conducting networks inside a polymer matrix for the dev... Read More about Highly Ordered BN⊥–BN⊥ Stacking Structure for Improved Thermally Conductive Polymer Composites.

Electro-thermal and mechanical performance of multi-wall carbon nanotubes buckypapers embedded in fibre reinforced polymer composites for ice protection applications (2020)
Journal Article

Several ice protection strategies have been developed to overcome the icing hazards in the aerospace industry. The electro-thermal method is one of the popular approaches to prevent ice accretion and accumulation on aircraft surfaces. Given the incre... Read More about Electro-thermal and mechanical performance of multi-wall carbon nanotubes buckypapers embedded in fibre reinforced polymer composites for ice protection applications.

One-step fabrication of superhydrophobic P(VDF-co-HFP) nanofibre membranes using electrospinning technique (2019)
Journal Article

© 2019 Wiley Periodicals, Inc. In this study, superhydrophobic electrospun P(VDF-co-HFP) membranes were fabricated in a one-step electrospinning process. The effects of the key parameters of electrospinning (solution concentration, electrical potenti... Read More about One-step fabrication of superhydrophobic P(VDF-co-HFP) nanofibre membranes using electrospinning technique.

Electrospun nanofibre membrane based transparent slippery liquid-infused porous surfaces with icephobic properties (2019)
Journal Article

Icephobic surfaces have attracted increasing attention due to their wide ranging application areas from wind and solar energy systems to aviation. Slippery liquid-infused porous surfaces (SLIPS) are being explored for passive ice protection due to th... Read More about Electrospun nanofibre membrane based transparent slippery liquid-infused porous surfaces with icephobic properties.

Effect of surface adsorption on icing behaviour of metallic coating (2019)
Journal Article

Icephobicity of materials has received intensive attention in recent years due to the increasing requirement of ice protection in aerospace, wind energy and power lines. However, the influencing factors of material icephobicity have not been well ide... Read More about Effect of surface adsorption on icing behaviour of metallic coating.

In situ investigations of the phase change behaviour of tungsten oxide nanostructures (2018)
Journal Article
Thummavichai, K., Wang, N., Xu, F., Rance, G., Xia, Y., & Zhu, Y. (2018). In situ investigations of the phase change behaviour of tungsten oxide nanostructures. Royal Society Open Science, 5, https://doi.org/10.1098/rsos.171932

This study appraises the use of in-situ diffraction and spectroscopy techniques, complemented with ex-situ electron microscopy analyses, to investigate the geometry and phase change behaviour of bundled ultrathin W18O49 nanowires and WO3 nanoparticle... Read More about In situ investigations of the phase change behaviour of tungsten oxide nanostructures.

A generic method to synthesise graphitic carbon coated nanoparticles in large scale and their derivative polymer nanocomposites (2017)
Journal Article
Wang, N., Yang, Z., Xu, F., Thummavichai, K., Chen, H., Xia, Y., & Zhu, Y. (2017). A generic method to synthesise graphitic carbon coated nanoparticles in large scale and their derivative polymer nanocomposites. Scientific Reports, 7(1), Article 11829. https://doi.org/10.1038/s41598-017-12200-1

A versatile Rotary Chemical Vapour Deposition (RCVD) technique for the in-situ synthesis of large scale carbon-coated non-magnetic metal oxide nanoparticles (NPs) is presented, and a controllable coating thickness varying between 1–5 nm has been achi... Read More about A generic method to synthesise graphitic carbon coated nanoparticles in large scale and their derivative polymer nanocomposites.

How the toughest inorganic fullerene cages absorb shockwave pressures in a protective nanocomposite: experimental evidence from two in situ investigations (2017)
Journal Article
Xu, F., Kobayashi, T., Yang, Z., Sekine, T., Chang, H., Wang, N., …Zhu, Y. (2017). How the toughest inorganic fullerene cages absorb shockwave pressures in a protective nanocomposite: experimental evidence from two in situ investigations. ACS Nano, 11(8), https://doi.org/10.1021/acsnano.7b02943

Nanocomposites fabricated using the toughest caged inorganic fullerene WS2 (IF-WS2) nanoparticles could offer ultimate protection via absorbing shockwaves; however, if the IF-WS2 nanomaterials really work, how they behave and what they experience wit... Read More about How the toughest inorganic fullerene cages absorb shockwave pressures in a protective nanocomposite: experimental evidence from two in situ investigations.

Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications (2016)
Journal Article
Qian, L., Xu, F., Voisey, K., Nekouie, V., Zhou, Z., Silberschmidt, V. V., & Hou, X. (2017). Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications. Surface and Coatings Technology, 311, https://doi.org/10.1016/j.surfcoat.2016.12.106

ZrO2 nano-particles were incorporated into electro-deposited PtAl coatings in an attempt to enhance their performance by exploiting the effect of reactive element oxides. PtAl coatings with and without ZrO2 particles were deposited onto three commerc... Read More about Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications.