Professor EDWARD LESTER's Outputs (84)

Residual Stress Measurement of Suspension HVOF-Sprayed Alumina Coating via a Hole-Drilling Method (2020)
Journal Article
Owoseni, T. A., Bai, M., Curry, N., Lester, E. H., Grant, D. M., & Hussain, T. (2020). Residual Stress Measurement of Suspension HVOF-Sprayed Alumina Coating via a Hole-Drilling Method. Journal of Thermal Spray Technology, 29(6), 1339–1350. https://doi.org/10.1007/s11666-020-01072-z

The nature and magnitude of residual stresses in thermal-sprayed coatings determine their lifetime and failure mechanisms. The residual stresses of suspension high-velocity oxy-fuel (SHVOF) thermal sprayed alumina (Al2O3) coating were measured with h... Read More about Residual Stress Measurement of Suspension HVOF-Sprayed Alumina Coating via a Hole-Drilling Method.

A Sustainable Chemicals Manufacturing Paradigm Using CO2 and Renewable H2 (2020)
Journal Article
Bommareddy, R. R., Wang, Y., Pearcy, N., Hayes, M., Lester, E., Minton, N. P., & Conradie, A. V. (2020). A Sustainable Chemicals Manufacturing Paradigm Using CO2 and Renewable H2. iScience, 23(6), Article 101218. https://doi.org/10.1016/j.isci.2020.101218

© 2020 The Author(s) The chemical industry must decarbonize to align with UN Sustainable Development Goals. A shift toward circular economies makes CO2 an attractive feedstock for producing chemicals, provided renewable H2 is available through techno... Read More about A Sustainable Chemicals Manufacturing Paradigm Using CO2 and Renewable H2.

Experimental data on morphological characterization of chars from coal and bagasse blends (2020)
Journal Article
Garcia, E., Barraza-Burgos, J., Guerrero, J., Trujillo, M., Lester, E., & Williams, O. (in press). Experimental data on morphological characterization of chars from coal and bagasse blends. Data in Brief, 29, Article 105358. https://doi.org/10.1016/j.dib.2020.105358

© 2020 The Authors Morphological characterization of chars from coal and bagasse plays an important role in both the burning efficiency and intrinsic reactivity of chars, during a combustion process [1], [2]. In this work, abundant data on the morpho... Read More about Experimental data on morphological characterization of chars from coal and bagasse blends.

Application of TG technique to determine spontaneous heating propensity of coals (2020)
Journal Article
Lowndes, I. S., Mohalik, N. K., & Lester, E. (2021). Application of TG technique to determine spontaneous heating propensity of coals. Journal of Thermal Analysis and Calorimetry, 143, 185-201. https://doi.org/10.1007/s10973-019-09237-x

© 2020, Akadémiai Kiadó, Budapest, Hungary. The TG method is applied to eleven coal samples of varying rank collected from across the Jharia coalfield, India, to determine spontaneous heating susceptibility. Previous literature does not agree as to t... Read More about Application of TG technique to determine spontaneous heating propensity of coals.

Automated image analysis techniques to characterise pulverised coal particles and predict combustion char morphology (2019)
Journal Article
Perkins, J., Williams, O., Wu, T., & Lester, E. (2020). Automated image analysis techniques to characterise pulverised coal particles and predict combustion char morphology. Fuel, 259, Article 116022. https://doi.org/10.1016/j.fuel.2019.116022

A new automated image analysis system that analyses individual coal particles to predict daughter char morphology is presented. 12 different coals were milled to 75-106 µm, segmented from large mosaic images and the proportions of the different petro... Read More about Automated image analysis techniques to characterise pulverised coal particles and predict combustion char morphology.

Sustainability assessment of continuous-flow hydrothermal synthesis of nanomaterials in the context of other production technologies (2019)
Journal Article
Stieberova, B., Zilka, M., Ticha, M., Freiberg, F., Caramazana-González, P., McKechnie, J., & Lester, E. (2019). Sustainability assessment of continuous-flow hydrothermal synthesis of nanomaterials in the context of other production technologies. Journal of Cleaner Production, 241, Article 118325. https://doi.org/10.1016/j.jclepro.2019.118325

In this paper, we provide a comprehensive techno-economic and life cycle environmental evaluation of the continuous-flow hydrothermal synthesis (CFHS) of nanoparticles in the context of current production technologies. This method is compared with a... Read More about Sustainability assessment of continuous-flow hydrothermal synthesis of nanomaterials in the context of other production technologies.

Formation of Metallurgical Coke within Minutes through Coal Densification and Microwave Energy (2019)
Journal Article
Williams, O., Ure, A., Stevens, L., Binner, E., Dodds, C., Kingman, S., Das, B., Dash, P. S., & Lester, E. (2019). Formation of Metallurgical Coke within Minutes through Coal Densification and Microwave Energy. Energy and Fuels, 33(7), 6817-6828. https://doi.org/10.1021/acs.energyfuels.9b00511

This paper shows how feedstock densification gives rise to a step change in the time required to create a metallurgical grade coke using microwave energy. Five densified coking and non-coking coals were heated in a multi-mode microwave 2450 MHz cavit... Read More about Formation of Metallurgical Coke within Minutes through Coal Densification and Microwave Energy.

Continuous Synthesis of Zn2Al-CO3 Layered Double Hydroxides for the Adsorption of Reactive Dyes from Water (2019)
Journal Article
Clark, I., Smith, J., Gomes, R. L., & Lester, E. (2019). Continuous Synthesis of Zn2Al-CO3 Layered Double Hydroxides for the Adsorption of Reactive Dyes from Water. Journal of Environmental Chemical Engineering, 7(3), Article 103175. https://doi.org/10.1016/j.jece.2019.103175

A novel pilot scale approach to continuous synthesis of layered double hydroxides (LDHs) was used to produce Zn2Al-CO3. The Zn2Al-CO3 was calcined and used in the adsorption of Reactive Black 5 (RB5) and Reactive Orange 16 (RO16) from water. The spec... Read More about Continuous Synthesis of Zn2Al-CO3 Layered Double Hydroxides for the Adsorption of Reactive Dyes from Water.

The impact of ash pellet characteristics and pellet processing parameters on ash fusion behaviour (2019)
Journal Article
Daley, P., Williams, O., Pang, C. H., Wu, T., & Lester, E. (2019). The impact of ash pellet characteristics and pellet processing parameters on ash fusion behaviour. Fuel, 251, 779-788. https://doi.org/10.1016/j.fuel.2019.03.142

The Ash Fusion Test (AFT) is considered to be the most popular method of characterising the melt characteristics of solid fuel ash. This study shows how pellet preparation can make significant improvements to repeatability. Pelleting pressure, pellet... Read More about The impact of ash pellet characteristics and pellet processing parameters on ash fusion behaviour.

Continuous synthesis of Zn2Al-CO3 layered double hydroxides: A comparison of bench, pilot and industrial scale syntheses (2019)
Journal Article
Clark, I., Gomes, R. L., Crawshaw, C., Neve, L., Lodge, R., Fay, M., Winkler, C., Hull, M., & Lester, E. (2019). Continuous synthesis of Zn2Al-CO3 layered double hydroxides: A comparison of bench, pilot and industrial scale syntheses. Reaction Chemistry and Engineering, 4(4), 663-666. https://doi.org/10.1039/c8re00241j

© 2019 The Royal Society of Chemistry. Zn2Al-CO3 was produced continuously at bench (g h-1), pilot (100s g h-1) and industrial scale (10s kg h-1). Crystal domain length and BET surface area were similar at all three scales although there was a small... Read More about Continuous synthesis of Zn2Al-CO3 layered double hydroxides: A comparison of bench, pilot and industrial scale syntheses.

Predicting the Behaviour of Near-Critical and Supercritical Alcohols at Microwave Frequencies: Validation of Molecular Dynamic Simulations as a Tool that can Substitute for Measurements under Extreme Experimental Conditions (2019)
Journal Article
Robinson, D., Irvine, D. J., Robinson, J. P., Lester, E. H., Kingman, S. W., & Dimitrakis, G. (2019). Predicting the Behaviour of Near-Critical and Supercritical Alcohols at Microwave Frequencies: Validation of Molecular Dynamic Simulations as a Tool that can Substitute for Measurements under Extreme Experimental Conditions. Journal of Supercritical Fluids, 146, 165-171. https://doi.org/10.1016/j.supflu.2019.01.018

Equilibrium and non-equilibrium molecular dynamic simulations, predicting the dielectric properties of near-critical and supercritical methanol and ethanol at microwave frequencies have been carried out. The autocorrelation functions of the dielectri... Read More about Predicting the Behaviour of Near-Critical and Supercritical Alcohols at Microwave Frequencies: Validation of Molecular Dynamic Simulations as a Tool that can Substitute for Measurements under Extreme Experimental Conditions.

Removal of copper from cattle footbath wastewater with layered double hydroxide adsorbents as a route to antimicrobial resistance mitigation on dairy farms (2018)
Journal Article
Williams, O., Clark, I., Gomes, R. L., Perehinec, T., Hobman, J. L., Stekel, D. J., Hyde, R., Dodds, C., & Lester, E. (2019). Removal of copper from cattle footbath wastewater with layered double hydroxide adsorbents as a route to antimicrobial resistance mitigation on dairy farms. Science of the Total Environment, 655, 1139-1149. https://doi.org/10.1016/j.scitotenv.2018.11.330

Copper and zinc are routinely used in livestock antimicrobial footbaths in commercial farming. The footbath mix is a cost to farmers, and the disposal of spent footbath into slurry tanks leads to soil contamination, as well as the potential for antim... Read More about Removal of copper from cattle footbath wastewater with layered double hydroxide adsorbents as a route to antimicrobial resistance mitigation on dairy farms.

Development a modified crossing point temperature (CPTHR) method to assess spontaneous combustion propensity of coal and its chemo-metric analysis (2018)
Journal Article
Mohalik, N., Lester, E., & Lowndes, I. (2018). Development a modified crossing point temperature (CPTHR) method to assess spontaneous combustion propensity of coal and its chemo-metric analysis. Journal of Loss Prevention in the Process Industries, 56, 359-369. https://doi.org/10.1016/j.jlp.2018.09.00

Spontaneous combustion of Indian coals was investigated using spontaneous combustion rig at University of Nottingham, UK to assess their susceptibility. In the present study authors have used eleven coal samples collected from the Jharia coalfield (J... Read More about Development a modified crossing point temperature (CPTHR) method to assess spontaneous combustion propensity of coal and its chemo-metric analysis.

High efficiency synthesis of HKUST-1 under mild conditions with high BET surface area and CO2 uptake capacity (2018)
Journal Article
Chen, Y., Mu, X., Lester, E., & Wu, T. (2018). High efficiency synthesis of HKUST-1 under mild conditions with high BET surface area and CO2 uptake capacity. Progress in Natural Science, https://doi.org/10.1016/j.pnsc.2018.08.002

This study focuses on the development of a hydrothermal method for the rapid synthesis of good quality copper benzene-1,3,5-tricarboxylate (referred to as HKUST-1) with high yield under mild preparation conditions to address the issues associated wit... Read More about High efficiency synthesis of HKUST-1 under mild conditions with high BET surface area and CO2 uptake capacity.

Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology (2018)
Journal Article
Owoseni, T., Murray, J., Pala, Z., Lester, E., Grant, D., & Hussain, T. (2018). Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology. Surface and Coatings Technology, https://doi.org/10.1016/j.surfcoat.2018.08.047

Suspension high-velocity oxy-fuel (SHVOF) thermal spray is an emerging spray technology that enables the processing of nanometric feedstock. Although SHVOF thermal sprayed alumina coatings prepared from alpha alumina feedstock have been widely report... Read More about Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology.

Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications (2018)
Journal Article
Williams, O., Taylor, S., Lester, E., Kingman, S., Giddings, D., & Eastwick, C. (2018). Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications. Materials, 11(8), Article 1329. https://doi.org/10.3390/ma11081329

In this paper, the applicability of mechanical tests for biomass pellet characterisation was investigated. Pellet durability, quasi-static (low strain rate), and dynamic (high strain rate) mechanical tests were applied to mixed wood, eucalyptus, sunf... Read More about Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications.

A proposed biomass char classification system (2018)
Journal Article
Lester, E., Avila, C., Pang, C. H., Williams, O., Perkins, J., Gaddipatti⁠, S., Tucker, G. A., Barraza, J. M., Trujillo-Uribe, M. P., & Wu, T. (2018). A proposed biomass char classification system. Fuel, 232, https://doi.org/10.1016/j.fuel.2018.05.153

A new classification system is proposed for the morphological characterisation of char structures from biomass. These char structures are unlike the coal chars that have an established nomenclature via the International Committee of Coal and Organic... Read More about A proposed biomass char classification system.

A review of the environmental impact of nanomaterial synthesis using continuous flow hydrothermal synthesis (2018)
Journal Article
Caramazana, P., Dunne, P., Gimeno-Fabra, M., McKechnie, J., & Lester, E. (2018). A review of the environmental impact of nanomaterial synthesis using continuous flow hydrothermal synthesis. Current Opinion in Green and Sustainable Chemistry, 12, 57-62. https://doi.org/10.1016/j.cogsc.2018.06.016

Continuous flow hydrothermal synthesis (CFHS) is an emerging process technology for the manufacture of nanomaterials. Recent work has been undertaken to establish the green ‘credentials’ of CFHS amongst alternative techniques for nanosynthesis. In th... Read More about A review of the environmental impact of nanomaterial synthesis using continuous flow hydrothermal synthesis.

A techno-economic assessment of the potential for combining supercritical water oxidation with ‘in-situ’ hydrothermal synthesis of nanocatalysts using a counter current mixing reactor (2018)
Journal Article
Al-Atta, A., Huddle, T., Rodríguez, Y. G., Mato, F., García-Serna, J., Cocero, M. J., Gomes, R., & Lester, E. (2018). A techno-economic assessment of the potential for combining supercritical water oxidation with ‘in-situ’ hydrothermal synthesis of nanocatalysts using a counter current mixing reactor. Chemical Engineering Journal, 344, 431-440. https://doi.org/10.1016/j.cej.2018.03.058

A combined process of supercritical water oxidation (SCWO) and supercritical water hydrothermal synthesis (SCWHS) in a continuous counter current reactor is reported. Acrylic acid was used as a model unsaturated carboxylic acid compound and the effec... Read More about A techno-economic assessment of the potential for combining supercritical water oxidation with ‘in-situ’ hydrothermal synthesis of nanocatalysts using a counter current mixing reactor.

Development of a petrographic technique to assess the spontaneous combustion susceptibility of Indian coals (2017)
Journal Article
Mohalik, N., Lester, E., & Lowndes, I. (in press). Development of a petrographic technique to assess the spontaneous combustion susceptibility of Indian coals. International Journal of Coal Preparation and Utilization, https://doi.org/10.1080/19392699.2017.1360874

Petrographic studies are commonly used categorise the potential utilisation of coals. Eleven coal samples from the jharia coalfield (JCF), india, were studied using petrographic techniques to investigate maceral content, reflectance, and textural cha... Read More about Development of a petrographic technique to assess the spontaneous combustion susceptibility of Indian coals.