Skip to main content

Research Repository

Advanced Search

Professor FELICITY ROSE's Outputs (62)

Biocooperative Regenerative Materials by Harnessing Blood-Clotting and Peptide Self-Assembly (2024)
Journal Article
Padilla-Lopategui, S., Ligorio, C., Bu, W., Yin, C., Laurenza, D., Redondo, C., Owen, R., Sun, H., Rose, F. R., Iskratsch, T., & Mata, A. (2024). Biocooperative Regenerative Materials by Harnessing Blood-Clotting and Peptide Self-Assembly. Advanced Materials, 36(52), Article 2407156. https://doi.org/10.1002/adma.202407156

The immune system has evolved to heal small ruptures and fractures with remarkable efficacy through regulation of the regenerative hematoma (RH); a rich and dynamic environment that coordinates numerous molecular and cellular processes to achieve com... Read More about Biocooperative Regenerative Materials by Harnessing Blood-Clotting and Peptide Self-Assembly.

Fungal Attachment-Resistant Polymers for the Additive Manufacture of Medical Devices (2024)
Journal Article
Yong, L. X., Sefton, J., Vallières, C., Rance, G. A., Hill, J., Cuzzucoli Crucitti, V., Dundas, A. A., Rose, F. R. A. J., Alexander, M. R., Wildman, R., He, Y., Avery, S. V., & Irvine, D. J. (2024). Fungal Attachment-Resistant Polymers for the Additive Manufacture of Medical Devices. ACS Applied Materials and Interfaces, 16(40), 54508–54519. https://doi.org/10.1021/acsami.4c04833

This study reports the development of the first copolymer material that (i) is resistant to fungal attachment and hence biofilm formation, (ii) operates via a nonkilling mechanism, i.e., avoids the use of antifungal actives and the emergence of funga... Read More about Fungal Attachment-Resistant Polymers for the Additive Manufacture of Medical Devices.

In vivo analysis of hybrid hydrogels containing dual growth factor combinations, and skeletal stem cells under mechanical stimulation for bone repair (2024)
Journal Article
Gothard, D., Rotherham, M., Smith, E. L., Kanczler, J. M., Henstock, J., Wells, J. A., Roberts, C. A., Qutachi, O., Peto, H., Rashidi, H., Rojo, L., White, L. J., Stevens, M. M., El Haj, A. J., Rose, F. R., & Oreffo, R. O. (2024). In vivo analysis of hybrid hydrogels containing dual growth factor combinations, and skeletal stem cells under mechanical stimulation for bone repair. Mechanobiology in Medicine, 2(4), Article 100096. https://doi.org/10.1016/j.mbm.2024.100096

Bone tissue engineering requires a combination of materials, cells, growth factors and mechanical cues to recapitulate bone formation. In this study we evaluated hybrid hydrogels for minimally invasive bone formation by combining biomaterials with sk... Read More about In vivo analysis of hybrid hydrogels containing dual growth factor combinations, and skeletal stem cells under mechanical stimulation for bone repair.

Computer Vision for Substrate Detection in High-Throughput Biomaterial Screens Using Bright-Field Microscopy (2024)
Journal Article
Owen, R., Nasir, A., H. Amer, M., Nie, C., Xue, X., Burroughs, L., Denning, C., D. Wildman, R., A. Khan, F., R. Alexander, M., & R. A. J. Rose, F. (2024). Computer Vision for Substrate Detection in High-Throughput Biomaterial Screens Using Bright-Field Microscopy. Advanced Intelligent Systems, Article 2400573. https://doi.org/10.1002/aisy.202400573

High-throughput screening (HTS) can be used when ab initio information is unavailable for rational design of new materials, generating data on properties such as chemistry and topography that control cell behavior. Biomaterial screens are typically f... Read More about Computer Vision for Substrate Detection in High-Throughput Biomaterial Screens Using Bright-Field Microscopy.

Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient (2024)
Journal Article
Rivers, G., Lion, A., Rofiqoh Eviana Putri, N., Rance, G., Moloney, C., Taresco, V., Crucitti, V. C., Constantin, H., Inê Evangelista Barreiros, M., Cantu, L. R., Tuck, C., Rose, F. R. A. J., Hague, R. J. M., Roberts, C. J., Turyanska, L., Wildman, R. D., & He, Y. (2024). Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient. Materials Today Advances, 22, Article 100493. https://doi.org/10.1016/j.mtadv.2024.100493

Additive manufacturing offers manufacture of personalised pharmaceutical tablets through design freedoms and material deposition control at an individual voxel level. This control goes beyond geometry and materials choices: inkjet based 3D printing e... Read More about Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient.

Enabling high-fidelity personalised pharmaceutical tablets through multimaterial inkjet 3D printing with a water-soluble excipient (2024)
Journal Article
Rivers, G., Lion, A., Putri, N. R. E., Rance, G. A., Moloney, C., Taresco, V., Crucitti, V. C., Constantin, H., Evangelista Barreiros, M. I., Cantu, L. R., Tuck, C. J., Rose, F. R., Hague, R. J., Roberts, C. J., Turyanska, L., Wildman, R. D., & He, Y. (2024). Enabling high-fidelity personalised pharmaceutical tablets through multimaterial inkjet 3D printing with a water-soluble excipient. Materials Today Advances, 22, Article 100493. https://doi.org/10.1016/j.mtadv.2024.100493

Additive manufacturing offers manufacture of personalised pharmaceutical tablets through design freedoms and material deposition control at an individual voxel level. This control goes beyond geometry and materials choices: inkjet based 3D printing e... Read More about Enabling high-fidelity personalised pharmaceutical tablets through multimaterial inkjet 3D printing with a water-soluble excipient.

Sustained adenosine release: Revealing its impact on osteogenic signalling pathways of human mesenchymal stromal cells (2024)
Journal Article
Hajiali, H., McLaren, J., Gonzalez-García, C., Abdelrazig, S., Kim, D.-H., Dalby, M. J., Salmerón-Sánchez, M., & Rose, F. R. (2024). Sustained adenosine release: Revealing its impact on osteogenic signalling pathways of human mesenchymal stromal cells. Engineered Regeneration, 5(2), 255-268. https://doi.org/10.1016/j.engreg.2024.04.002

Non-healing fractures, a global health concern arising from trauma, osteoporosis, and tumours, can lead to severe disabilities. Adenosine, integral to cellular energy metabolism, gains prominence in bone regeneration via adenosine A2B receptor activa... Read More about Sustained adenosine release: Revealing its impact on osteogenic signalling pathways of human mesenchymal stromal cells.

Glycerol-based sustainably sourced resin for volumetric printing (2024)
Journal Article
Krumins, E., Lentz, J. C., Sutcliffe, B., Sohaib, A., Jacob, P. L., Brugnoli, B., Cuzzucoli Crucitti, V., Cavanagh, R., Owen, R., Moloney, C., Ruiz-Cantu, L., Francolini, I., Howdle, S. M., Shusteff, M., Rose, F. R. A. J., Wildman, R. D., He, Y., & Taresco, V. (2024). Glycerol-based sustainably sourced resin for volumetric printing. Green Chemistry, 26(3), 1345-1355. https://doi.org/10.1039/d3gc03607c

Volumetric Additive Manufacturing (VAM) represents a revolutionary advancement in the field of Additive Manufacturing, as it allows for the creation of objects in a single, cohesive process, rather than in a layer-by-layer approach. This innovative t... Read More about Glycerol-based sustainably sourced resin for volumetric printing.

An in vitro assessment of the thermoreversible PLGA-PEG-PLGA copolymer: Implications for Descemet's membrane endothelial keratoplasty (2022)
Journal Article
Tint, N. L., Cheng, K. K., Dhillon, A. S., Keane, P. A., Alexander, P., Kennedy, D., Chau, D. Y. S., Rose, F. R., & Allan, B. D. S. (2023). An in vitro assessment of the thermoreversible PLGA-PEG-PLGA copolymer: Implications for Descemet's membrane endothelial keratoplasty. Clinical and Experimental Ophthalmology, 51(1), 58-66. https://doi.org/10.1111/ceo.14167

Background: To explore the use of a thermoreversible copolymer gel coating to prevent donor tissue scrolling in Descemet's membrane endothelial keratoplasty (DMEK). Methods: PLGA-PEG-PLGA triblock copolymer was synthesised via ring opening polymerisa... Read More about An in vitro assessment of the thermoreversible PLGA-PEG-PLGA copolymer: Implications for Descemet's membrane endothelial keratoplasty.

Exploiting Generative Design for Multi-Material Inkjet 3D Printed Cell Instructive, Bacterial Biofilm Resistant Composites (2022)
Preprint / Working Paper
he, Y., Begines, B., Trindade, G., Abdi, M., dubern, J.-F., Prina, E., Hook, A., Choong, G., Ledesma, J., Tuck, C., R. A. J. Rose, F., Hague, R., Roberts, C., De Focatiis, D., Ashcroft, I., Williams, P., Irvine, D., alexander, M., & Wildman, R. Exploiting Generative Design for Multi-Material Inkjet 3D Printed Cell Instructive, Bacterial Biofilm Resistant Composites

As our understanding of disease grows, it is becoming established that treatment needs to be personalized and targeted to the needs of the individual. In this paper we show that multi-material inkjet-based 3D printing, when backed with generative des... Read More about Exploiting Generative Design for Multi-Material Inkjet 3D Printed Cell Instructive, Bacterial Biofilm Resistant Composites.

Lysyl oxidase like 2 is increased in asthma and contributes to asthmatic airway remodelling (2022)
Journal Article
Ramis, J., Middlewick, R., Pappalardo, F., Cairns, J. T., Stewart, I. D., John, A. E., Naveed, S. U. N., Krishnan, R., Miller, S., Shaw, D. E., Brightling, C. E., Buttery, L., Rose, F., Jenkins, G., Johnson, S. R., & Tatler, A. L. (2022). Lysyl oxidase like 2 is increased in asthma and contributes to asthmatic airway remodelling. European Respiratory Journal, 60(1), Article 2004361. https://doi.org/10.1183/13993003.04361-2020

BACKGROUND: Airway smooth muscle (ASM) cells are fundamental to asthma pathogenesis, influencing bronchoconstriction, airway hyperresponsiveness and airway remodelling. The extracellular matrix (ECM) can influence tissue remodelling pathways; however... Read More about Lysyl oxidase like 2 is increased in asthma and contributes to asthmatic airway remodelling.

Mineralizing Coating on 3D Printed Scaffolds for the Promotion of Osseointegration (2022)
Journal Article
Hasan, A., Bagnol, R., Owen, R., Latif, A., Rostam, H. M., Elsharkawy, S., Rose, F. R., Rodríguez-Cabello, J. C., Ghaemmaghami, A. M., Eglin, D., & Mata, A. (2022). Mineralizing Coating on 3D Printed Scaffolds for the Promotion of Osseointegration. Frontiers in Bioengineering and Biotechnology, 10, Article 836386. https://doi.org/10.3389/fbioe.2022.836386

Design and fabrication of implants that can perform better than autologous bone grafts remain an unmet challenge for the hard tissue regeneration in craniomaxillofacial applications. Here, we report an integrated approach combining additive manufactu... Read More about Mineralizing Coating on 3D Printed Scaffolds for the Promotion of Osseointegration.

Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers” (2022)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., Clark, E. A., Rose, F. R. A. J., Tuck, C., Hague, R., Roberts, C. J., Alexander, M., Irvine, D. J., & Wildman, R. D. (2022). Correction to “Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers”. ACS Applied Materials and Interfaces, 14(6), 8654. https://doi.org/10.1021/acsami.2c00035

The chemical structure of the drug trandolapril has been corrected in Figure 4c. The conclusions of the work have not been affected by this correction. (Figure present).

Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices (2021)
Journal Article
He, Y., Luckett, J., Begines, B., Dubern, J. F., Hook, A. L., Prina, E., Rose, F. R., Tuck, C. J., Hague, R. J., Irvine, D. J., Williams, P., Alexander, M. R., & Wildman, R. D. (2022). Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices. Biomaterials, 281, Article 121350. https://doi.org/10.1016/j.biomaterials.2021.121350

Chronic infection as a result of bacterial biofilm formation on implanted medical devices is a major global healthcare problem requiring new biocompatible, biofilm-resistant materials. Here we demonstrate how bespoke devices can be manufactured throu... Read More about Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices.

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers (2021)
Journal Article
Ruiz-Cantu, L., Trindade, G. F., Taresco, V., Zhou, Z., He, Y., Burroughs, L., Clark, E. A., Rose, F. R., Tuck, C., Hague, R., Roberts, C. J., Alexander, M., Irvine, D. J., & Wildman, R. D. (2021). Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers. ACS Applied Materials and Interfaces, 13(33), 38969-38978. https://doi.org/10.1021/acsami.1c07850

Controlling the microstructure of materials by means of phase separation is a versatile tool for optimizing material properties. Phase separation has been exploited to fabricate intricate microstructures in many fields including cell biology, tissue... Read More about Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers.

Droplet Microfluidic Optimisation Using Micropipette Characterisation of Bio-Instructive Polymeric Surfactants (2021)
Journal Article
Henshaw, C. A., Dundas, A. A., Cuzzucoli Crucitti, V., Alexander, M. R., Wildman, R., Rose, F. R. A. J., Irvine, D. J., & Williams, P. M. (2021). Droplet Microfluidic Optimisation Using Micropipette Characterisation of Bio-Instructive Polymeric Surfactants. Molecules, 26(11), Article 3302. https://doi.org/10.3390/molecules26113302

Droplet microfluidics can produce highly tailored microparticles whilst retaining monodispersity. However, these systems often require lengthy optimisation, commonly based on a trial-and-error approach, particularly when using bio-instructive, polyme... Read More about Droplet Microfluidic Optimisation Using Micropipette Characterisation of Bio-Instructive Polymeric Surfactants.

Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices (2021)
Journal Article
He, Y., Abdi, M., Trindade, G. F., Begines, B., Dubern, J. F., Prina, E., Hook, A. L., Choong, G. Y., Ledesma, J., Tuck, C. J., Rose, F. R., Hague, R. J., Roberts, C. J., De Focatiis, D. S., Ashcroft, I. A., Williams, P., Irvine, D. J., Alexander, M. R., & Wildman, R. D. (2021). Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices. Advanced Science, 8(15), Article 2100249. https://doi.org/10.1002/advs.202100249

As the understanding of disease grows, so does the opportunity for personalization of therapies targeted to the needs of the individual. To bring about a step change in the personalization of medical devices it is shown that multi-material inkjet-bas... Read More about Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices.

Mixed polymer and bioconjugate core/shell electrospun fibres for biphasic protein release (2021)
Journal Article
Adala, I., Ramis, J., Ntone Moussinga, C., Janowski, I., Amer, M. H., Bennett, A. J., Alexander, C., & Rose, F. R. (2021). Mixed polymer and bioconjugate core/shell electrospun fibres for biphasic protein release. Journal of Materials Chemistry B, 9(20), 4120-4133. https://doi.org/10.1039/d1tb00129a

Effective regenerative medicine requires delivery systems which can release multiple components at appropriate levels and at different phases of tissue growth and repair. However, there are few biomaterials and encapsulation techniques that are fully... Read More about Mixed polymer and bioconjugate core/shell electrospun fibres for biphasic protein release.

Discovery of synergistic material-topography combinations to achieve immunomodulatory osteoinductive biomaterials using a novel in vitro screening method: The ChemoTopoChip (2021)
Journal Article
Burroughs, L., Amer, M., Vassey, M., Koch, B., Figueredo, G., Mukonoweshuro, B., Mikulskis, P., Vasilevich, A., Vermeulen, S., Dryden, I. L., Winkler, D. A., Ghaemmaghami, A. M., Rose, F. R. A. J., de Boer, J., & Alexander, M. R. (2021). Discovery of synergistic material-topography combinations to achieve immunomodulatory osteoinductive biomaterials using a novel in vitro screening method: The ChemoTopoChip. Biomaterials, 271, Article 120740. https://doi.org/10.1016/j.biomaterials.2021.120740

© 2021 The Authors Human mesenchymal stem cells (hMSCs) are widely represented in regenerative medicine clinical strategies due to their compatibility with autologous implantation. Effective bone regeneration involves crosstalk between macrophages an... Read More about Discovery of synergistic material-topography combinations to achieve immunomodulatory osteoinductive biomaterials using a novel in vitro screening method: The ChemoTopoChip.

Designing topographically textured microparticles for induction and modulation of osteogenesis in mesenchymal stem cell engineering (2020)
Journal Article
Amer, M. H., Alvarez-Paino, M., McLaren, J., Pappalardo, F., Trujillo, S., Wong, J. Q., Shrestha, S., Abdelrazig, S., Stevens, L. A., Lee, J. B., Kim, D. H., González-García, C., Needham, D., Salmerón-Sánchez, M., Shakesheff, K. M., Alexander, M. R., Alexander, C., & Rose, F. R. (2021). Designing topographically textured microparticles for induction and modulation of osteogenesis in mesenchymal stem cell engineering. Biomaterials, 266, Article 120450. https://doi.org/10.1016/j.biomaterials.2020.120450

© 2020 The Authors Mesenchymal stem cells are the focus of intense research in bone development and regeneration. The potential of microparticles as modulating moieties of osteogenic response by utilizing their architectural features is demonstrated... Read More about Designing topographically textured microparticles for induction and modulation of osteogenesis in mesenchymal stem cell engineering.