Skip to main content

Research Repository

Advanced Search

Scanning electrochemical microscopy at thermal sprayed anti-corrosion coatings: effect of thermal spraying on heterogeneous electron transfer kinetics

Niaz, Akbar; Boatwright, Adrian; Voisey, K.T.; Walsh, Darren A.

Scanning electrochemical microscopy at thermal sprayed anti-corrosion coatings: effect of thermal spraying on heterogeneous electron transfer kinetics Thumbnail


Authors

Akbar Niaz

Adrian Boatwright

KATY VOISEY katy.voisey@nottingham.ac.uk
Associate Professor

DARREN WALSH DARREN.WALSH@NOTTINGHAM.AC.UK
Professor of Chemistry



Abstract

The effect of thermal spraying on the electrochemical activity of an anti-corrosion superalloy was studied quantitatively using scanning electrochemical microscopy (SECM). The superalloy used was Inconel 625 (a Ni base superalloy) and thin coatings of the alloy were formed on mild steel using high velocity oxy-fuel (HVOF) thermal spraying. The kinetics of electron transfer (ET) across the Inconel 625 coating/electrolyte interface were studied using SECM using ferrocenemethanol as the redox mediator. For comparison, the kinetics of ET across stainless steel/electrolyte and bulk wrought Inconel 625/electrolyte interfaces were also studied using SECM. The standard heterogeneous ET rate constant, k°, for ferrocenemethanol reduction at stainless steel was 1.0 ± 0.5 × 10−3 cm s−1, compared to 2.6 ± 1.8 × 10−2 cm s−1 at the wrought Inconel 625 surface. However, at the HVOF-sprayed Inconel 625 surface, the kinetics of ET varied across the surface and k° for ferrocenemethanol reduction ranged between ∼2.2 × 10−4 cm s−1 and ∼2.6 × 10−3 cm s−1. These results clearly demonstrate that SECM can be used to quantify the effect of thermal spraying on the electrochemical properties of Inconel 625 and that thermal spraying results in an electrochemically-heterogeneous surface.

Citation

Niaz, A., Boatwright, A., Voisey, K., & Walsh, D. A. (2011). Scanning electrochemical microscopy at thermal sprayed anti-corrosion coatings: effect of thermal spraying on heterogeneous electron transfer kinetics. Journal of Electroanalytical Chemistry, 657(1-2), https://doi.org/10.1016/j.jelechem.2011.03.009

Journal Article Type Article
Publication Date Jul 1, 2011
Deposit Date Jan 28, 2015
Publicly Available Date Jan 28, 2015
Journal Journal of Electroanalytical Chemistry
Print ISSN 1572-6657
Electronic ISSN 1873-2569
Publisher Elsevier
Peer Reviewed Not Peer Reviewed
Volume 657
Issue 1-2
DOI https://doi.org/10.1016/j.jelechem.2011.03.009
Keywords coating; electrochemistry; thermally sprayed coating
Public URL https://nottingham-repository.worktribe.com/output/707568
Publisher URL http://www.sciencedirect.com/science/article/pii/S1572665711001317
Additional Information NOTICE: this is the author’s version of a work that was accepted for publication in Journal of Electroanalytical Chemistry. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Journal of Electroanalytical Chemistry, 657(1-2), (2011) doi: 10.1016/j.jelechem.2011.03.009

Files





You might also like



Downloadable Citations