Skip to main content

Research Repository

Advanced Search

CFD multiphase modelling of the acetone condensation and evaporation process in a horizontal circular tube

Mohammed, Hayder I; Giddings, Donald; Walker, Gavin S; Power, Henry

Authors

Hayder I Mohammed

Gavin S Walker

Henry Power



Abstract

With increasing demands on energy efficiency, the use of low grade waste heat using vapour absorption refrigeration systems (VARS) are receiving renewed interest. One idea is to use the combination of acetone and zinc bromide as the salt solution, which allows use of temperatures in the order of 10s of C above ambient conditions. This work numerically models acetone phase change in the evaporator and condenser in order to indicate how improvements can be made in these components of the system. ANSYS® Fluent finite volume method CFD is used to produce volume of fluid (VOF) and mixture multiphase flow models to investigate the evaporation and the condensation of acetone in a horizontal circular tube. Different velocities and temperatures were taken in each process to explore the effect of these variables in the system. A user defined function (UDF) is used to calculate the volume fraction of the phases. For the evaporation case, the heat transfer coefficient increases with increasing velocity and the temperature difference between the inlet flow and the wall, as expected. The mass transfer rate decreases with increasing the flow rate or decreasing the wall temperature, from 0.045 kg/m 3 .s at 0.01 m/s to 0.016 kg/m 3 .s at 0.06 m/s and it drops from 0.044 to 0.023 kg/m 3 .s by changing the temperature just from 300 to 298 K. This demonstrates a reduction in specific heat transfer to the liquid despite the higher wall heat transfer coefficient. In the condenser, vapour quality decreases along the tube as liquid acetone is created with reduced flow rate. Vapour volume fraction at the outlet section drops from 0.74 to 0.168 by increasing the ingoing velocity from 0.01 to 0.06 m/s. Increasing the rate of condensation will increase the liquid in the evaporator, which increase the evaporation rate then increase the performance of the VARS. This demonstrates the importance of controlling the temperature and the flow rate in the VARS for generate more refrigerants.

Citation

Mohammed, H. I., Giddings, D., Walker, G. S., & Power, H. (2019). CFD multiphase modelling of the acetone condensation and evaporation process in a horizontal circular tube. International Journal of Heat and Mass Transfer, 134, 1159-1170. https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.062

Journal Article Type Article
Acceptance Date Feb 18, 2019
Online Publication Date Feb 22, 2019
Publication Date 2019-05
Deposit Date May 3, 2019
Publicly Available Date Mar 28, 2024
Journal International Journal of Heat and Mass Transfer
Print ISSN 0017-9310
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 134
Pages 1159-1170
Series ISSN 00179310
DOI https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.062
Keywords Acetone; Condensation; Evaporation; CFD; Heat transfer; Mass transfer; pipe flow; Phase change
Public URL https://nottingham-repository.worktribe.com/output/2017882
Publisher URL https://www.sciencedirect.com/science/article/pii/S001793101835511X
Additional Information due to be released to public on May 2021 to fulfil the requirement of the Green Access

Files







You might also like



Downloadable Citations