Outputs (69)

Simulation of interaction between a freely moving solid particle and a freely moving liquid droplet by lattice Boltzmann method (2018)
Journal Article
Yang, B., & Chen, S. (2018). Simulation of interaction between a freely moving solid particle and a freely moving liquid droplet by lattice Boltzmann method. International Journal of Heat and Mass Transfer, 127, 474-484. https://doi.org/10.1016/j.ijheatmasstransfer.2018.06.112

Solid particles and liquid droplets widely coexist in many industrial processes. Particle-droplet interactions critically influence the dynamics of those processes. In this study, the interactions between a freely moving solid particle and a freely m... Read More about Simulation of interaction between a freely moving solid particle and a freely moving liquid droplet by lattice Boltzmann method.

An operational semantics for a fragment of PRS (2018)
Presentation / Conference Contribution
de Silva, L., Meneguzzi, F., & Logan, B. An operational semantics for a fragment of PRS. Presented at 27th International Joint Conference on Artificial Intelligence (IJCAI) and the 23rd European Conference on Artificial Intelligence (ECAI)

The Procedural Reasoning System (PRS) is arguably the first implementation of the Belief–Desire–Intention (BDI) approach to agent programming. PRS remains extremely influential, directly or indirectly inspiring the development of subsequent BDI agent p... Read More about An operational semantics for a fragment of PRS.

Composite capabilities for cloud manufacturing (demonstration) (2018)
Presentation / Conference Contribution
Felli, P., de Silva, L., Logan, B., & Ratchev, S. Composite capabilities for cloud manufacturing (demonstration). Presented at International Conference on Autonomous Agents and Multiagent Systems (AAMAS 2018)

Wet steam measurement techniques (2018)
Journal Article
Walker, D., Barham, S., Giddings, D., & Dimitrakis, G. (2019). Wet steam measurement techniques. Reviews in Chemical Engineering, 35(5), 627-648. https://doi.org/10.1515/revce-2017-0078

In recent years a greater need for power station efficiency has become evident; improving turbine blade efficiency is one of the methods proposed. This efficiency relies upon the wetness of the steam that comes into contact with the blades of the low... Read More about Wet steam measurement techniques.

Formation of hollow carbon nanoshells from thiol stabilised silver nanoparticles via heat treatment (2018)
Journal Article
Watts, J. A., Fay, M. W., Rance, G. A., Brown, P. D., & Khlobystov, A. N. (2018). Formation of hollow carbon nanoshells from thiol stabilised silver nanoparticles via heat treatment. Carbon, 139, 538-544. https://doi.org/10.1016/j.carbon.2018.06.074

Uniform, less 10 nm sized, hollow carbon nano-shells (HCNS) have been prepared via a single-step, thermal treatment of alkanethiol stabilised Ag nanoparticles (TS-AgNP). Direct evidence for the formation of spherical HCNS from TS-AgNP is provided by... Read More about Formation of hollow carbon nanoshells from thiol stabilised silver nanoparticles via heat treatment.

Analytical solution and experimental study of effective Young’s modulus of SLM-fabricated lattice structure with triangular unit cells (2018)
Journal Article
Niu, J., Choo, H. L., Sun, W., & Mok, S. H. (2018). Analytical solution and experimental study of effective Young’s modulus of SLM-fabricated lattice structure with triangular unit cells. Journal of Manufacturing Science and Engineering, 140(9), Article 091008. https://doi.org/10.1115/1.4040159

Research on materials, design, processing, and manufacturability of parts produced by additive manufacturing (AM) has been investigated significantly in the past. However, limited research on tensile behavior of cellular lattice structures by AM was... Read More about Analytical solution and experimental study of effective Young’s modulus of SLM-fabricated lattice structure with triangular unit cells.

Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black (2018)
Journal Article
Pfau, S., La Roca, A., Haffner-Staton, E., Rance, G., Fay, M., Brough, R., & Malizia, S. (2018). Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black. Carbon, 139, 342-352. https://doi.org/10.1016/j.carbon.2018.06.050

Two gasoline turbocharged direct injection (GTDI) and two diesel soot-in-oil samples were compared with one flame-generated soot sample. High resolution transmission electron microscopy imaging was employed for the initial qualitative assessment of t... Read More about Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black.

Comparing life cycle energy and global warming potential of carbon fibre composite recycling technologies and waste management options (2018)
Journal Article
Meng, F., Olivetti, E. A., Zhao, Y., Chang, J. C., Pickering, S. J., & McKechnie, J. (in press). Comparing life cycle energy and global warming potential of carbon fibre composite recycling technologies and waste management options. ACS Sustainable Chemistry and Engineering, https://doi.org/10.1021/acssuschemeng.8b01026

Carbon fibre reinforced polymers (CFRP) are used in increasing quantities as they have some of the best properties in terms of specific strength and stiffness of any widely available material. By 2020, annual global CFRP production is expected to be... Read More about Comparing life cycle energy and global warming potential of carbon fibre composite recycling technologies and waste management options.

Wave interaction with defects in pressurised composite structures (2018)
Journal Article
Apalowo, R., Chronopoulos, D., & Tanner, G. (2018). Wave interaction with defects in pressurised composite structures. Journal of Nondestructive Evaluation, 37(3), Article 48. https://doi.org/10.1007/s10921-018-0501-5

There exists a great variety of structural failure modes which must be frequently inspected to ensure continuous structural integrity of composite structures. This work presents a Finite Element (FE) based method for calculating wave interaction with... Read More about Wave interaction with defects in pressurised composite structures.

Investigation of short-term creep deformation mechanisms in MarBN steel at elevated temperatures (2018)
Journal Article
Benaarbia, A., Xu, X., Sun, W., Becker, A., & Jepson, M. (2018). Investigation of short-term creep deformation mechanisms in MarBN steel at elevated temperatures. Materials Science and Engineering: A, 734, 491-505. https://doi.org/10.1016/j.msea.2018.06.063

This paper reports the short-term creep behavior at elevated temperatures of a MarBN steel variant. Creep tests were performed at 3 different temperatures (625oC, 650oC and 675oC) with applied stresses ranging from 160 MPa to 300 MPa, and failure tim... Read More about Investigation of short-term creep deformation mechanisms in MarBN steel at elevated temperatures.