ADAM BUTTRESS ADAM.BUTTRESS@NOTTINGHAM.AC.UK
Senior Research Fellow
Towards large scale microwave treatment of ores: Part 1 – Basis of design, construction and commissioning
Buttress, A.J.; Katrib, Juliano; Batchelor, A.R.; Jones, D.A.; Craig, D.A.; Royal, T.A.; Dodds, Chris; Kingman, S.W.
Authors
Juliano Katrib
ANDREW BATCHELOR ANDREW.BATCHELOR@NOTTINGHAM.AC.UK
Research Associate
D.A. Jones
D.A. Craig
T.A. Royal
CHRIS DODDS CHRIS.DODDS@NOTTINGHAM.AC.UK
Professor of Process Engineering
SAM KINGMAN SAM.KINGMAN@NOTTINGHAM.AC.UK
Interim Provost and Deputy Vice Chancellor
Abstract
Despite over thirty years of work, microwave pre-treatment processes for beneficiation of ores have not progressed much further than laboratory testing. In this paper we present a scaleable pilot-scale system for the microwave treatment of ores capable of operating at throughputs of up to 150tph. This has been achieved by confining the electric field produced from two 100kW generators operating at 896MHz in a gravity fed vertical flow system using circular choking structures yielding power densities of at least 6x108 W/m3 in the heated mineral phases. Measured S11 scattering parameters for a quartzite ore (-3.69±0.4dB) in the as-built applicator correlated well with the simulation (-3.25dB), thereby validating our design approach. We then show that by fully integrating the applicator with a materials handling system based on the concept of mass flow, we achieve a reliable, continuous process. The system was used to treat a range of porphyry copper ores.
Citation
Buttress, A., Katrib, J., Batchelor, A., Jones, D., Craig, D., Royal, T., …Kingman, S. (2017). Towards large scale microwave treatment of ores: Part 1 – Basis of design, construction and commissioning. Minerals Engineering, 109, https://doi.org/10.1016/j.mineng.2017.03.006
Journal Article Type | Article |
---|---|
Acceptance Date | Mar 11, 2017 |
Online Publication Date | Apr 8, 2017 |
Publication Date | Aug 1, 2017 |
Deposit Date | May 15, 2017 |
Publicly Available Date | May 15, 2017 |
Journal | Minerals Engineering |
Print ISSN | 0892-6875 |
Electronic ISSN | 0892-6875 |
Publisher | Elsevier |
Peer Reviewed | Peer Reviewed |
Volume | 109 |
DOI | https://doi.org/10.1016/j.mineng.2017.03.006 |
Keywords | Microwave; Ore; Copper; Pilot scale; Fracture; Beneficiation |
Public URL | https://nottingham-repository.worktribe.com/output/875589 |
Publisher URL | http://www.sciencedirect.com/science/article/pii/S089268751730081X |
Contract Date | May 15, 2017 |
Files
Buttress et al (2017) - Pilot MW Ores Part 1.pdf
(1.7 Mb)
PDF
Copyright Statement
Copyright information regarding this work can be found at the following address: http://creativecommons.org/licenses/by-nc-nd/4.0
You might also like
Accelerated swell testing of artificial sulfate bearing lime stabilised cohesive soils
(2014)
Journal Article
Understanding the scabbling of concrete using microwave energy
(2015)
Journal Article
Towards large scale microwave treatment of ores: Part 2 - Metallurgical testing
(2017)
Journal Article
Downloadable Citations
About Repository@Nottingham
Administrator e-mail: discovery-access-systems@nottingham.ac.uk
This application uses the following open-source libraries:
SheetJS Community Edition
Apache License Version 2.0 (http://www.apache.org/licenses/)
PDF.js
Apache License Version 2.0 (http://www.apache.org/licenses/)
Font Awesome
SIL OFL 1.1 (http://scripts.sil.org/OFL)
MIT License (http://opensource.org/licenses/mit-license.html)
CC BY 3.0 ( http://creativecommons.org/licenses/by/3.0/)
Powered by Worktribe © 2024
Advanced Search