Optimised use of dielectric spectroscopy at microwave frequencies for direct online monitoring of polymerisation reactions

Kalamiotis, Alexis; Ilchev, Alexander; Irvine, Derek J.; Dimitrakis, Georgios

Abstract

This study reports the first use of dielectric spectroscopy over at a wide frequency range to monitor, in real time, the progress of a ring opening polymerisation. An open-ended coaxial line sensor was placed directly into the reaction medium of a polymerisation of ε-caprolactone and used to characterise the dielectric properties of the polymerisation mixture both ‘in-situ’ and with time at microwave frequencies. In addition to measurements obtained by the sensor, samples of the medium were extracted at various time points for off-line analysis, to confirm the level of conversion and polymer molecular weights that had been achieved. The results demonstrated that the dielectric properties values exhibited by the reaction medium with time could be correlated directly to the progress of the reaction. Thus, the experimental data allowed the construction of a calibration curve which could be used to predict the conversion of monomer to polymer at any given point of the reaction. The dielectric data permitted also the identification of key reaction parameters, such as the optimum point of termination for the reaction. Furthermore, the analysis of the dielectric data over a wide frequency spectrum enabled the identification of the most suitable frequencies for the practical operation of the sensor, in terms of linearity and sensitivity. This will enable the development of suitable instrumentation and an improved strategy for the online monitoring and control of a broad range of polymerisation reactions.

Citation

Kalamiotis, A., Ilchev, A., Irvine, D. J., & Dimitrakis, G. (2019). Optimised use of dielectric spectroscopy at microwave frequencies for direct online monitoring of polymerisation reactions. Sensors and Actuators B: Chemical, 290C, 34-40. https://doi.org/10.1016/j.snb.2019.03.120

• Journal Article Type: Article
• Acceptance Date: Mar 26, 2019
• Online Publication Date: Mar 27, 2019
• Publication Date: Jul 1, 2019
• Deposit Date: Apr 1, 2019
• Publicly Available Date: Mar 28, 2020
• Journal: Sensors and Actuators B: Chemical
• Print ISSN: 0925-4005
• Electronic ISSN: 1873-3077
• Publisher: Elsevier
• Peer Reviewed: Peer Reviewed
• Volume: 290C
• Pages: 34-40
• DOI: https://doi.org/10.1016/j.snb.2019.03.120
• Keywords: Instrumentation; Electrical and Electronic Engineering; Materials Chemistry; Electronic, Optical and Magnetic Materials; Surfaces, Coatings and Films; Condensed Matter Physics; Metals and Alloys
• Public URL: https://nottingham-repository.worktribe.com/output/1722540
• Publisher URL: https://www.sciencedirect.com/science/article/pii/S0925400519304861
• Contract Date: Apr 2, 2019