Thushan Ekneligoda
A coupled thermal-mechanical numerical model of underground coal gasification (UCG) including spontaneous coal combustion and its effects
Ekneligoda, Thushan; Marshall, Alec
Authors
Professor ALEC MARSHALL alec.marshall@nottingham.ac.uk
PROFESSOR OF GEOTECHNICAL ENGINEERING
Abstract
Underground coal gasification (UCG) is a promising option for extracting energy from coal in unworked or hard to access areas of the subsurface. From a geotechnical perspective, UCG involves various complex phenomena resulting from the elevated temperatures induced within the rock surrounding the UCG burn. This paper presents a coupled thermal-mechanical numerical model developed to represent a UCG trial in Wieczorek, Poland. Temperature dependent mechanical properties were assigned according to results obtained from laboratory experiments and data available in the literature. The coal burning process was simulated by modifying the energy balance equation with an additional term related to the calorific value of coal as a source. This source term was described using a time decay function to reflect the fact that the energy release from coal gradually decreases with time. The mechanical degradation of coal due to burning was simulated by removing the burned zone from the calculation after a specific time, which depended on zone size and type of coal. In this study, it was found that the maximum temperature at the burning zone was always less than 1000°C, which agrees with previous research carried out for other UCG trials. The size of the burning zone was predicted to spread about 15m laterally after 20 days of burning. Ground subsidence was evaluated for single and multiple (parallel) panel simulations; subsidence at the top of the numerical mesh, corresponding to a depth of 395m below the surface, ranged from 23mm for a single panel to 85mm for seven panels. The degradation of mechanical properties of the rock surrounding the burned zone due to heating was found to have a marginal effect on the ground subsidence when parallel burning was carried out. The numerical modelling results obtained from this study may provide guidance for the design and operation of UCG processes.
Citation
Ekneligoda, T., & Marshall, A. (2018). A coupled thermal-mechanical numerical model of underground coal gasification (UCG) including spontaneous coal combustion and its effects. International Journal of Coal Geology, 199, 31-38. https://doi.org/10.1016/j.coal.2018.09.015
Journal Article Type | Article |
---|---|
Acceptance Date | Sep 24, 2018 |
Online Publication Date | Sep 25, 2018 |
Publication Date | Nov 1, 2018 |
Deposit Date | Sep 25, 2018 |
Publicly Available Date | Sep 26, 2019 |
Journal | International Journal of Coal Geology |
Print ISSN | 0166-5162 |
Electronic ISSN | 1872-7840 |
Publisher | Elsevier |
Peer Reviewed | Peer Reviewed |
Volume | 199 |
Pages | 31-38 |
DOI | https://doi.org/10.1016/j.coal.2018.09.015 |
Keywords | Coal; Underground coal gasification; Numerical modelling; Calorific value; Parallel burning |
Public URL | https://nottingham-repository.worktribe.com/output/1130642 |
Publisher URL | https://www.sciencedirect.com/science/article/pii/S0166516218304099 |
Contract Date | Sep 25, 2018 |
Files
Ekneligoda And Marshall 2018 Author Version
(1.2 Mb)
PDF
You might also like
Response of framed buildings on separate footings to tunnelling: a hybrid modelling study
(2024)
Presentation / Conference Contribution
Effect of elastic modulus on masonry buildings during tunnelling: a coupled centrifuge-numerical modelling study
(2024)
Presentation / Conference Contribution
Setup and calibration of piles with FBG strain sensors in a geotechnical centrifuge
(2024)
Presentation / Conference Contribution
Effect of infill nonlinearity on frame response to tunnelling
(2024)
Presentation / Conference Contribution
Coupled Centrifuge-Numerical Modelling of Shallow Strip Foundations
(2024)
Presentation / Conference Contribution
Downloadable Citations
About Repository@Nottingham
Administrator e-mail: discovery-access-systems@nottingham.ac.uk
This application uses the following open-source libraries:
SheetJS Community Edition
Apache License Version 2.0 (http://www.apache.org/licenses/)
PDF.js
Apache License Version 2.0 (http://www.apache.org/licenses/)
Font Awesome
SIL OFL 1.1 (http://scripts.sil.org/OFL)
MIT License (http://opensource.org/licenses/mit-license.html)
CC BY 3.0 ( http://creativecommons.org/licenses/by/3.0/)
Powered by Worktribe © 2025
Advanced Search