Outputs (695)

Design and optimization of electrochemical cell potential for hydrogen gas production (2020)
Journal Article
Al-Shara, N. K., Sher, F., Iqbal, S. Z., Curnick, O., & Chen, G. Z. (2021). Design and optimization of electrochemical cell potential for hydrogen gas production. Journal of Energy Chemistry, 52, 421-427. https://doi.org/10.1016/j.jechem.2020.04.026

© 2020 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences This study deals with the optimization of best working conditions in molten melt for the production of hydrogen (H2) gas. Limited research has been carried out... Read More about Design and optimization of electrochemical cell potential for hydrogen gas production.

Factors Influencing Perceptions of Productivity Associated with Digital Manufacturing Technology (2020)
Presentation / Conference Contribution
Sandhu, T., Argyle, E., & Sharples, S. (2020, April). Factors Influencing Perceptions of Productivity Associated with Digital Manufacturing Technology. Presented at Ergonomics and Human Factors (EHF) 2020, Virtual

Industry 4.0, or the fourth industrial revolution, has the potential to transform manufacturing productivity through the integration of digital manufacturing technology. Although digital technologies are considered to have the potential to enhance or... Read More about Factors Influencing Perceptions of Productivity Associated with Digital Manufacturing Technology.

Optimal sensor and actuator placement for structural health monitoring via an efficient convex cost-benefit optimization (2020)
Journal Article
Cantero-Chinchilla, S., Beck, J. L., Chiachío, M., Chiachío, J., Chronopoulos, D., & Jones, A. (2020). Optimal sensor and actuator placement for structural health monitoring via an efficient convex cost-benefit optimization. Mechanical Systems and Signal Processing, 144, Article 106901. https://doi.org/10.1016/j.ymssp.2020.106901

© 2020 Elsevier Ltd The number and position of sensors and actuators are key decision variables that dictate the performance of any structural health monitoring system. This paper proposes choosing them optimally by using an objective function that c... Read More about Optimal sensor and actuator placement for structural health monitoring via an efficient convex cost-benefit optimization.

Monitoring the cleaning of food fouling in pipes using ultrasonic measurements and machine learning (2020)
Journal Article
Escrig, J., Woolley, E., Simeone, A., & Watson, N. (2020). Monitoring the cleaning of food fouling in pipes using ultrasonic measurements and machine learning. Food Control, 116, Article 107309. https://doi.org/10.1016/j.foodcont.2020.107309

Food and drink production equipment is routinely cleaned to ensure it remains hygienic and operating under optimal conditions. A limitation of existing cleaning systems is that they do not know when the fouling material has been removed so nearly al... Read More about Monitoring the cleaning of food fouling in pipes using ultrasonic measurements and machine learning.

Bioinspired Precision Engineering of Three-Dimensional Epithelial Stem Cell Microniches (2020)
Journal Article
Prina, E., Amer, M. H., Sidney, L., Tromayer, M., Moore, J., Liska, R., Bertolin, M., Ferrari, S., Hopkinson, A., Dua, H., Yang, J., Wildman, R., & Rose, F. R. (2020). Bioinspired Precision Engineering of Three-Dimensional Epithelial Stem Cell Microniches. Advanced Biosystems, 4(6), Article 2000016. https://doi.org/10.1002/adbi.202000016

© 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Maintenance of the epithelium relies on stem cells residing within specialized microenvironments, known as epithelial crypts. Two-photon polymerization (2PP) is a valuable... Read More about Bioinspired Precision Engineering of Three-Dimensional Epithelial Stem Cell Microniches.

Progress in the CO2 Capture Technologies for Fluid Catalytic Cracking (FCC) Units—A Review (2020)
Journal Article
Güleç, F., Meredith, W., & Snape, C. E. (2020). Progress in the CO2 Capture Technologies for Fluid Catalytic Cracking (FCC) Units—A Review. Frontiers in Energy Research, 8, https://doi.org/10.3389/fenrg.2020.00062

© Copyright © 2020 Güleç, Meredith and Snape. Heavy industries including cement, iron and steel, oil refining, and petrochemicals are collectively responsible for about 22% of global CO2 emissions. Among these industries, oil refineries account for 4... Read More about Progress in the CO2 Capture Technologies for Fluid Catalytic Cracking (FCC) Units—A Review.

Heterogeneous Integration of Magnetic Component Windings on Ceramic Substrates (2020)
Journal Article
Stratta, A., Mouawad, B., Antonini, M., De Lillo, L., Empringham, L., & Johnson, M. C. (2021). Heterogeneous Integration of Magnetic Component Windings on Ceramic Substrates. IEEE Journal of Emerging and Selected Topics in Power Electronics, 9(4), 3867-3876. https://doi.org/10.1109/jestpe.2020.2989805

Heterogeneous integration and the converter in package concept have been highlighted as enabling technologies to unlock the full potential of silicon carbide (SiC) and gallium nitride (GaN) devices. Control of parasitic elements in the commutation lo... Read More about Heterogeneous Integration of Magnetic Component Windings on Ceramic Substrates.

Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock (2020)
Journal Article
Aboulkhair, N. T., Zhao, G., Hague, R. J., Kennedy, A. R., Ashcroft, I. A., & Clare, A. T. (2020). Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock. Journal of Manufacturing Processes, 55, 249-253. https://doi.org/10.1016/j.jmapro.2020.04.039

The demonstration of salt dissolution incorporated within laser powder-bed fusion fabrication processes has allowed the creation of complex porous structures without the need for sophisticated design algorithms. This serves to simplify the process, f... Read More about Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock.

Reuse of a Damaged Permanent Magnet Synchronous Motor for Torque Ripple and Acoustic Noise Elimination using a Novel Repetitive Observer (2020)
Journal Article
Tang, M., Odhano, S., Formentini, A., & Zanchetta, P. (2020). Reuse of a Damaged Permanent Magnet Synchronous Motor for Torque Ripple and Acoustic Noise Elimination using a Novel Repetitive Observer. IEEE Transactions on Industry Applications, 56(4), 3790-3798. https://doi.org/10.1109/tia.2020.2989681

A lad-used servo permanent magnet synchronous motor (PMSM) has been accidentally damaged due to overcurrent. On one hand, the mechanical damage in the end bearing and break part generates acoustic noise even when rotating the shaft by hand. On the ot... Read More about Reuse of a Damaged Permanent Magnet Synchronous Motor for Torque Ripple and Acoustic Noise Elimination using a Novel Repetitive Observer.

A Digital Internal Model Current Controller for Salient Machines (2020)
Journal Article
Petric, I. Z., Vukosavic, S. N., DEgano, M., & Galassini, A. (2021). A Digital Internal Model Current Controller for Salient Machines. IEEE Transactions on Industrial Electronics, 68(6), 4703-4717. https://doi.org/10.1109/tie.2020.2988234

The performance of anisotropic electrical machines is strongly dependent on the current loop characteristics. The problems for achieving robustness and fast response, without overshoot and oscillations, are mainly related to different values and beha... Read More about A Digital Internal Model Current Controller for Salient Machines.