Outputs (471)

Three-dimensional carbon foam nanocomposites for thermal energy storage (2018)
Journal Article
Ola, O., Chen, Y., & Zhu, Y. (2019). Three-dimensional carbon foam nanocomposites for thermal energy storage. Solar Energy Materials and Solar Cells, 191, 297-305. https://doi.org/10.1016/j.solmat.2018.11.037

Nanocomposites consisting of paraffin/graphene nanoplatelets mix embedded in carbon foams via vacuum infiltration were fabricated with the aim of developing new phase change material (PCM) formulation with excellent shape stabilization, improved ther... Read More about Three-dimensional carbon foam nanocomposites for thermal energy storage.

Microfluidic fabrication of porous polydimethylsiloxane microparticles for the treatment of toluene-contaminated water (2018)
Journal Article
Lian, Z., Ren, Y., He, J., Chen, G. Z., & Koh, K. S. (2018). Microfluidic fabrication of porous polydimethylsiloxane microparticles for the treatment of toluene-contaminated water. Microfluidics and Nanofluidics, 22(12), Article 145. https://doi.org/10.1007/s10404-018-2157-y

© 2018, Springer-Verlag GmbH Germany, part of Springer Nature. In this paper, pristine and two types of porous polydimethylsiloxane (PDMS) microparticles were fabricated using oil-in-water (O/W) single emulsion template by the needle-based microflui... Read More about Microfluidic fabrication of porous polydimethylsiloxane microparticles for the treatment of toluene-contaminated water.

Imaging beyond the fundamental slope limit in surface metrology using fluorophore-aided scattering microscopy (2018)
Presentation / Conference Contribution
Liu, J., Liu, C., Li, L., Su, R., & Leach, R. (2018, November). Imaging beyond the fundamental slope limit in surface metrology using fluorophore-aided scattering microscopy. Paper presented at Special Interest Group Meeting: Structured & Freeform Surfaces, Paris, France

Topography measurement for smooth surfaces with high slopes, e.g. freeform optics, is a challenging task for optical measuring instruments as the light reflected by the tilted surface cannot be sufficiently collected by the objective, resulting in lo... Read More about Imaging beyond the fundamental slope limit in surface metrology using fluorophore-aided scattering microscopy.

Effect of curing conditions on the pore solution and carbonation resistance of alkali-activated fly ash and slag pastes (2018)
Journal Article
Nedeljković, M., Ghiassi, B., van der Laan, S., Li, Z., & Ye, G. (2019). Effect of curing conditions on the pore solution and carbonation resistance of alkali-activated fly ash and slag pastes. Cement and Concrete Research, 116, 146-158. https://doi.org/10.1016/j.cemconres.2018.11.011

The effect of curing conditions (sealed and unsealed) on the pore solution composition and carbonation resistance of different binary alkali-activated fly ash (FA) and ground granulated blast furnace slag (GBFS) pastes is investigated in this study.... Read More about Effect of curing conditions on the pore solution and carbonation resistance of alkali-activated fly ash and slag pastes.

Study of a BIPV adaptive system: combining timber and photovoltaic technologies (2018)
Journal Article
Mazzucchelli, E. S., Alston, M., Brzezicki, M., & Doniacovo, L. (2018). Study of a BIPV adaptive system: combining timber and photovoltaic technologies. Journal of Facade Design and Engineering, 6(3), 149-162. https://doi.org/10.7480/jfde.2018.3.2602

© 2018 TU Delft. All rights reserved. The paper presents the first results of research that was partly conducted within the framework of European COST Action TU1403 - Adaptive Façades Network, on the development of an adaptive BIPV (Building Integrat... Read More about Study of a BIPV adaptive system: combining timber and photovoltaic technologies.

Mechanical performance of eco-efficient hollow clay bricks incorporating industrial nano-crystalline aluminium sludge (2018)
Journal Article
Cavaco, E., Grilo, I., Paulo Gouveia, J., Júlio, E., & Neves, L. C. (2020). Mechanical performance of eco-efficient hollow clay bricks incorporating industrial nano-crystalline aluminium sludge. European Journal of Environmental and Civil Engineering, 24(12), 1921-1938. https://doi.org/10.1080/19648189.2018.1492974

In this paper, mechanical properties of a new structural and eco-efficient hollow clay bricks are investigated. The principal goal was to recycle residual sludge from aluminium anodizing industries by incorporating it in the raw material of bricks, t... Read More about Mechanical performance of eco-efficient hollow clay bricks incorporating industrial nano-crystalline aluminium sludge.

A statistical approach to estimate Global Navigation Satellite Systems (GNSS) receiver signal tracking performance in the presence of ionospheric scintillation (2018)
Journal Article
Vadakke Veettil, S., Aquino, M., Spogli, L., & Cesaroni, C. (2018). A statistical approach to estimate Global Navigation Satellite Systems (GNSS) receiver signal tracking performance in the presence of ionospheric scintillation. Journal of Space Weather and Space Climate, 8, A51. https://doi.org/10.1051/swsc/2018037

Ionospheric scintillation can seriously impair the Global Navigation Satellite Systems (GNSS) receiver signal tracking performance, thus affecting the required levels of availability, accuracy and integrity of positioning that supports modern day GNS... Read More about A statistical approach to estimate Global Navigation Satellite Systems (GNSS) receiver signal tracking performance in the presence of ionospheric scintillation.

Reactive material jetting of polyimide insulators for complex circuit board design (2018)
Journal Article
Zhang, F., Saleh, E., Vaithilingam, J., Li, Y., Tuck, C., Hague, R., Wildman, R., & He, Y. (2019). Reactive material jetting of polyimide insulators for complex circuit board design. Additive Manufacturing, 25, 477-484. https://doi.org/10.1016/j.addma.2018.11.017

Polyimides are a group of high performance thermal stable dielectric materials used in diverse applications. In this article, we synthesized and developed a high-performance polyimide precursor ink for a Material Jetting (MJ) process. The proposed in... Read More about Reactive material jetting of polyimide insulators for complex circuit board design.

Trade-off study of a variation aware determinate wing assembly against a traditional assembly strategy (2018)
Presentation / Conference Contribution
Bacharoudis, K., Bakker, O. J., Popov, A., & Ratchev, S. Trade-off study of a variation aware determinate wing assembly against a traditional assembly strategy. Presented at 8th EASN-CEAS International Workshop on Manufacturing for Growth & Innovation, Glasgow, UK

The present study introduces a trade-off framework to evaluate assembly concepts to make informed decisions for aircraft wing structures. This includes (1) the design of the assembly concepts and the estimation of the probability of achieving specifi... Read More about Trade-off study of a variation aware determinate wing assembly against a traditional assembly strategy.

Multi-Objective Supervisory Control for DC/DC Converters in Advanced Aeronautic Applications (2018)
Journal Article
Cavallo, A., Canciello, G., Guida, B., Kulsangcharoen, P., Yeoh, S., Rashed, M., & Bozhko, S. (2018). Multi-Objective Supervisory Control for DC/DC Converters in Advanced Aeronautic Applications. Energies, 11(11), Article 3216. https://doi.org/10.3390/en11113216

In this paper, an intelligent control strategy for DC/DC converters is proposed. The converter connects two DC busses, a high-voltage and a low-voltage bus. The control scheme is composed by a two-layer architecture, a low-level control based on the... Read More about Multi-Objective Supervisory Control for DC/DC Converters in Advanced Aeronautic Applications.