Outputs (15)

Mixing Enhancement Study in Axisymmetric Trapped-Vortex Combustor for Propane, Ammonia and Hydrogen (2024)
Journal Article
Uluk, H. S., Dakka, S. M., & Singh, K. (2024). Mixing Enhancement Study in Axisymmetric Trapped-Vortex Combustor for Propane, Ammonia and Hydrogen. Modelling, 5(2), 600-624. https://doi.org/10.3390/modelling5020032

The trapped-vortex combustor (TVC) is an alternative combustor design to conventional aeroengine combustors. The separate fuel and air injection of this combustor and its compact design make it a perfect candidate for conventional fuel usage. Moreove... Read More about Mixing Enhancement Study in Axisymmetric Trapped-Vortex Combustor for Propane, Ammonia and Hydrogen.

Towards isolated roughness induced boundary layer transition at supersonic speeds (2024)
Journal Article
González, L. E. M., & Dakka, S. M. (2024). Towards isolated roughness induced boundary layer transition at supersonic speeds. International Journal of Scientific and Technical Research in Engineering, 9(2), 1-16

The height of surface roughness elements affects the onset of laminar to turbulent transition in a boundary layer. CFD studies have been accomplished using RANS models at very low speeds, as a first step towards the understanding of this technology i... Read More about Towards isolated roughness induced boundary layer transition at supersonic speeds.

Numerical Analysis of Aerospike Engine Nozzle Performance at Various Truncation Lengths (2021)
Journal Article
Dakka, S., & Dennison, O. (2021). Numerical Analysis of Aerospike Engine Nozzle Performance at Various Truncation Lengths. International Journal of Aviation, Aeronautics, and Aerospace, 8(2), Article 12. https://doi.org/10.15394/ijaaa.2021.1601

The aerospike engine was first devised in the early 1960s where it provided new means of reaching orbit in a single stage. The paper aimes to demonstrate the viability of the technology by showcasing the increased nozzle thrust efficiency over the co... Read More about Numerical Analysis of Aerospike Engine Nozzle Performance at Various Truncation Lengths.

Analysis of the tribological interaction of a polytetrafluoroethylene-lined radial lip oil seal, shaft and lubricant sample (2021)
Journal Article
Shabbir, S., Garvey, S. D., Dakka, S. M., Rothwell, B. C., Su, R., Leach, R., & Weston, N. (2022). Analysis of the tribological interaction of a polytetrafluoroethylene-lined radial lip oil seal, shaft and lubricant sample. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236(1), 123-143. https://doi.org/10.1177/13506501211005876

To investigate the tribological interaction and wear mechanisms of polytetrafluoroethylene-lined radial lip oil seals in service, a sleeve, seal and lubricant sample taken off a rotating rig are studied. The test was terminated at 72 h, after severe... Read More about Analysis of the tribological interaction of a polytetrafluoroethylene-lined radial lip oil seal, shaft and lubricant sample.

Seal Failure In Aerospace Applications -- Creating A Global Open-source Database (2021)
Journal Article
Shabbir, S., Garvey, S., Rothwell, B., & Dakka, S. (2021). Seal Failure In Aerospace Applications -- Creating A Global Open-source Database. Sealing Technology, 2021(2), 7-9. https://doi.org/10.1016/S1350-4789%2821%2900076-3

Seal failure in aerospace applications-creating a global open-source database Seals are essential components used in numerous applications across engineering. A seal is a component that impedes the flow of fluid through a given system. The word 'impe... Read More about Seal Failure In Aerospace Applications -- Creating A Global Open-source Database.

An Experimental Study of Contact Temperatures at Sealing Interface against Varying Shaft Surfaces (2021)
Journal Article
Shabbir, S., Garvey, S. D., Dakka, S. M., & Rothwell, B. C. (2021). An Experimental Study of Contact Temperatures at Sealing Interface against Varying Shaft Surfaces. Coatings, 11(2), Article 156. https://doi.org/10.3390/coatings11020156

Increased temperatures at the sealing interface between the seal and shaft can reduce the working life of a seal through elastomer aging, swelling and increased friction. Degradation of the seal due to increased temperatures can cause pre‐mature fail... Read More about An Experimental Study of Contact Temperatures at Sealing Interface against Varying Shaft Surfaces.

Performance Characteristics Design of Pulsed Plasma Thrusters for Drag Counter-Reacting (2020)
Journal Article
Dakka, S. (2020). Performance Characteristics Design of Pulsed Plasma Thrusters for Drag Counter-Reacting. International Journal of Aviation, Aeronautics, and Aerospace, 7(4), Article 1. https://doi.org/10.15394/ijaaa.2020.1530

Determining the performance characteristics of off the shelf pulsed plasma thrusters to enhance the life time of low earth orbiting platforms was investigated theoretically. Pulsed plasma thruster analysis was accomplished through development of corr... Read More about Performance Characteristics Design of Pulsed Plasma Thrusters for Drag Counter-Reacting.

Investigation the Stability of Water in Oil Biofuel Emulsions Using Sunflower Oil (2020)
Journal Article
Sahota, R., & Dakka, S. M. (2020). Investigation the Stability of Water in Oil Biofuel Emulsions Using Sunflower Oil. ChemEngineering, 4(2), Article 36. https://doi.org/10.3390/chemengineering4020036

Targets to reduce CO2 emissions by 75% and NOx emissions by 90% by 2050 in aviation have been set by The Advisory Council for Aviation Research and Innovation in Europe. Sustainable fuels, e.g., emulsified biofuel, have demonstrated promise in reduci... Read More about Investigation the Stability of Water in Oil Biofuel Emulsions Using Sunflower Oil.

Experimental study of radial lip seals with different sleeve coatings (2020)
Journal Article
Shabbir, S., Garvey, S. D., Dakka, S. M., & Rothwell, B. C. (2020). Experimental study of radial lip seals with different sleeve coatings. Sealing Technology, 2020(3), 5-10. https://doi.org/10.1016/S1350-4789%2820%2930091-X

Radial Lip Seals with pre-loaded garter springs of 8.5oz, 12.5oz and 14oz are tested with 4 different sleeves to investigate various seal-sleeve combinations. To find optimum sleeve coating and seal combinations, leakage and performance is investigat... Read More about Experimental study of radial lip seals with different sleeve coatings.

Heat Transfer of Couette Flow in Micro-channels: an Analytical Model of Seals (2020)
Presentation / Conference Contribution
Shabbir, S., Garvey, S. D., Dakka, S. M., & Rothwell, B. C. (2020, March). Heat Transfer of Couette Flow in Micro-channels: an Analytical Model of Seals. Presented at 25th International Conference on Fluid Sealing, Manchester, UK

Analytical solutions of the temperature profile of a fluid in a Couette flow between two parallel plates are reported. The upper plate moves in the direction of the flow with a constant velocity and the lower plate is stationary, to simulate the cond... Read More about Heat Transfer of Couette Flow in Micro-channels: an Analytical Model of Seals.