Outputs (19)

Carbon-based films: a review on mechanical and tribology properties (2024)
Journal Article
Venturi, F. (2024). Carbon-based films: a review on mechanical and tribology properties. Materials Chemistry and Physics, 325, Article 129716. https://doi.org/10.1016/j.matchemphys.2024.129716

Carbon films have attracted widespread interest for decades thanks to their superior tribomechanical properties. As new carbon allotropes were discovered over time, measurements of elastic modulus reached terapascals, and coefficient of friction thou... Read More about Carbon-based films: a review on mechanical and tribology properties.

Alumina/GNPs coating on textured WC/Co substrate: microstructure and tribology (2024)
Journal Article
Sun, J., Liu, C., Venturi, F., Romero, A. R., & Hussain, T. (2024). Alumina/GNPs coating on textured WC/Co substrate: microstructure and tribology. Materials Science and Technology, 40(10), 782-798. https://doi.org/10.1177/02670836231223800

This work aims to provide a method for improving the tribological properties of WC/Co substrates. Laser surface texturing technology was employed to fabricate micro-grooves on the substrate surfaces. Suspension high velocity oxy fuel thermal spraying... Read More about Alumina/GNPs coating on textured WC/Co substrate: microstructure and tribology.

Microstructural Study of Cold-Sprayed CoCrFeNiMn High Entropy Alloy (2023)
Journal Article
Akisin, C. J., Dovgyy, B., Bennett, C. J., Pham, M. S., Venturi, F., & Hussain, T. (2023). Microstructural Study of Cold-Sprayed CoCrFeNiMn High Entropy Alloy. Journal of Thermal Spray Technology, 32, 2539–2562. https://doi.org/10.1007/s11666-023-01646-7

The rapid development of cold spraying technology for additive manufacturing of engineering components has made it a viable option for developing thick deposits from high-entropy alloys (HEAs). The microstructure of cold-sprayed CoCrFeNiMn deposit wa... Read More about Microstructural Study of Cold-Sprayed CoCrFeNiMn High Entropy Alloy.

SiC/YAG composite coatings by a novel liquid fuelled high velocity oxy-fuel suspension thermal spray (2023)
Journal Article
Venturi, F., Rincon Romero, A., & Hussain, T. (2023). SiC/YAG composite coatings by a novel liquid fuelled high velocity oxy-fuel suspension thermal spray. Surface and Coatings Technology, 471, Article 129865. https://doi.org/10.1016/j.surfcoat.2023.129865

Despite recent advances in suspension-based thermal spray techniques, there is still a need to widen the capability of available thermal spray setups to handle suspension to explore new compositions and improve the properties and performance of exist... Read More about SiC/YAG composite coatings by a novel liquid fuelled high velocity oxy-fuel suspension thermal spray.

A new hybrid suspension and solution precursor thermal spray for wear-resistant silicon carbide composite coatings (2022)
Journal Article
Memon, H., Rincón Romero, A., Derelizade, K., Venturi, F., & Hussain, T. (2022). A new hybrid suspension and solution precursor thermal spray for wear-resistant silicon carbide composite coatings. Materials and Design, 224, Article 111382. https://doi.org/10.1016/j.matdes.2022.111382

Silicon Carbide (SiC) coatings offer exceptional wear resistance and excellent tribological characteristics; however, it is a challenging material to be thermally sprayed due to a lack of melting point. In this study, a hybrid, single-step suspension... Read More about A new hybrid suspension and solution precursor thermal spray for wear-resistant silicon carbide composite coatings.

Numerical and Experimental Analysis of the Deformation Behavior of CoCrFeNiMn High Entropy Alloy Particles onto Various Substrates During Cold Spraying (2022)
Journal Article
Akisin, C. J., Bennett, C. J., Venturi, F., Assadi, H., & Hussain, T. (2022). Numerical and Experimental Analysis of the Deformation Behavior of CoCrFeNiMn High Entropy Alloy Particles onto Various Substrates During Cold Spraying. Journal of Thermal Spray Technology, 31(4), 1085-1111. https://doi.org/10.1007/s11666-022-01377-1

The bonding mechanisms of a wide range of metallic materials in cold spraying have been studied, mainly attributed to adiabatic shear instability (ASI) at high strain rates, whereas the impact and deformation behavior of high entropy alloys (HEAs) on... Read More about Numerical and Experimental Analysis of the Deformation Behavior of CoCrFeNiMn High Entropy Alloy Particles onto Various Substrates During Cold Spraying.

Thermal Spray Coatings for Electromagnetic Wave Absorption and Interference Shielding: A Review and Future Challenges (2022)
Journal Article
Faisal, N. H., Ahmed, R., Sellami, N., Prathuru, A., Njuguna, J., Venturi, F., Hussain, T., Nezhad, H. Y., Katiyar, N. K., Goel, S., Upadhyaya, H., Joshi, S., Muhammad-Sukki, F., Prabhu, R., Mallick, T., Whittow, W., & Kamnis, S. (2022). Thermal Spray Coatings for Electromagnetic Wave Absorption and Interference Shielding: A Review and Future Challenges. Advanced Engineering Materials, 24(7), Article 2200171. https://doi.org/10.1002/adem.202200171

This review aims to consolidate scattered literature on thermally sprayed coatings with nonionizing electromagnetic (EM) wave absorption and shielding over specific wavelengths potentially useful in diverse applications (e.g., microwave to millimeter... Read More about Thermal Spray Coatings for Electromagnetic Wave Absorption and Interference Shielding: A Review and Future Challenges.

Theoretical and practical aspects of the design and production of synthetic holograms for transmission electron microscopy (2022)
Journal Article
Rosi, P., Venturi, F., Medici, G., Menozzi, C., Gazzadi, G. C., Rotunno, E., Frabboni, S., Balboni, R., Rezaee, M., Tavabi, A. H., Dunin-Borkowski, R. E., Karimi, E., & Grillo, V. (2022). Theoretical and practical aspects of the design and production of synthetic holograms for transmission electron microscopy. Journal of Applied Physics, 131(3), Article 031101. https://doi.org/10.1063/5.0067528

Beam shaping-the ability to engineer the phase and the amplitude of massive and massless particles-has long interested scientists working on communication, imaging, and the foundations of quantum mechanics. In light optics, the shaping of electromagn... Read More about Theoretical and practical aspects of the design and production of synthetic holograms for transmission electron microscopy.

High temperature (900 °C) sliding wear of CrNiAlCY coatings deposited by high velocity oxy fuel thermal spray (2022)
Journal Article
Derelizade, K., Rincon, A., Venturi, F., Wellman, R. G., Kholobystov, A., & Hussain, T. (2022). High temperature (900 °C) sliding wear of CrNiAlCY coatings deposited by high velocity oxy fuel thermal spray. Surface and Coatings Technology, 432, Article 128063. https://doi.org/10.1016/j.surfcoat.2021.128063

Nickel based superalloy are in demand for high temperature applications and their corrosion, erosion and wear resistance have been investigated for a long time. Nickel chromium (NiCr) alloys are widely used for corrosion resistant coatings, while chr... Read More about High temperature (900 °C) sliding wear of CrNiAlCY coatings deposited by high velocity oxy fuel thermal spray.

Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating (2021)
Journal Article
Leng, K., Rincon Romero, A., Venturi, F., Ahmed, I., & Hussain, T. (2022). Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating. Journal of the European Ceramic Society, 42(4), 1594-1607. https://doi.org/10.1016/j.jeurceramsoc.2021.11.050

Gadolinium zirconate (GZ) is an attractive material for thermal barrier coatings (TBCs). However, a single layer GZ coating has poor thermal cycling life compared to Yttria Stabilized Zirconia (YSZ). In this study, Solution Precursor High Velocity Ox... Read More about Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating.