Outputs (43)

Optimal Ultrasonic Sensor Configuration Based on Value of Information (2019)
Presentation / Conference Contribution
Cantero-Chinchilla, S., Chiachío, J., & Chiachío, M. (2019, September). Optimal Ultrasonic Sensor Configuration Based on Value of Information. Presented at 29th European Safety and Reliability Conference, Hannover, Germany

Optimal sensor configuration has been proven to be essential in the design of structural health monitoring systems. Its impact in maintenance-related actions in an economic and safety-related way has motivated many authors to investigate this complex... Read More about Optimal Ultrasonic Sensor Configuration Based on Value of Information.

Automated characterisation of multi-view fringe projection system for three- dimensional measurement of additively manufactured parts (2019)
Presentation / Conference Contribution
Leach, R. K., Shaheen, A., Piano, S., Sims-Waterhouse, D., & Bointon, P. (2019, September). Automated characterisation of multi-view fringe projection system for three- dimensional measurement of additively manufactured parts. Presented at Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Ecole Centrale de Nantes, Nantes, France

Digital fringe projection is a non-contact method that is widely used for the dimensional characterisation of complex manufactured parts. However, single camera-projector fringe projection systems struggle to acquire the full three-dimensional point... Read More about Automated characterisation of multi-view fringe projection system for three- dimensional measurement of additively manufactured parts.

Metaheuristic optimisation of sound absorption performance of multilayered porous materials (2019)
Presentation / Conference Contribution
Ramamoorthy, V. T., Özcan, E., Parkes, A. J., Luc, J., & Bécot, F.-X. (2019, September). Metaheuristic optimisation of sound absorption performance of multilayered porous materials. Presented at 23rd International Congress on Acoustics (ICA 2019), Aachen, Germany

The optimization of multilayered-sound-packaging is a challenging task which involves searching the best/op-timal settings for a number of acoustic parameters. The search space size becomes too large to handle by brute force, as the number of those p... Read More about Metaheuristic optimisation of sound absorption performance of multilayered porous materials.

Optimal Ultrasonic Sensor Configuration for Plate-Like Structures Using the Value of Information (2019)
Presentation / Conference Contribution
Cantero-Chinchilla, S., Chiachío, J., Chiachío, M., Chronopoulos, D., Jones, A., Essa, Y., & de la Escalera, F. M. (2019, September). Optimal Ultrasonic Sensor Configuration for Plate-Like Structures Using the Value of Information. Presented at 12th International Workshop on Structural Health Monitoring, Stanford, California, USA

Condition-based maintenance is based on reliable and effective structural health monitoring systems able to provide accurate information about the health condition of a structure. Among the factors that influence the accuracy and reliability of such... Read More about Optimal Ultrasonic Sensor Configuration for Plate-Like Structures Using the Value of Information.

Ultrasonic Guided-Wave Based System Identification for Beams (2019)
Presentation / Conference Contribution
MALIK, M. K., CHINCHILLA, S. C., CHRONOPOULOS, D., CHIACHIAO, J., & ESSA, Y. (2019, September). Ultrasonic Guided-Wave Based System Identification for Beams. Presented at 12th International Workshop on Structural Health Monitoring, Stanford, California, USA

© 2019 by DEStech Publications, Inc. All rights reserved. Structural health monitoring (SHM) usually requires several stages of information, starting from damage detection, localisation, and identification. Ultrasonic guided waves can travel long dis... Read More about Ultrasonic Guided-Wave Based System Identification for Beams.

Repetitive Observer Design for Torque Ripple Reduction in PMSM Drives (2019)
Presentation / Conference Contribution
Tang, M., Formentini, A., & Zanchetta, P. (2019, September). Repetitive Observer Design for Torque Ripple Reduction in PMSM Drives. Presented at 21st European Conference on Power Electronics and Applications (EPE '19 ECCE Europe), Genova, Italy

Towards Optimal Design of Rainbow Metamaterials (2019)
Presentation / Conference Contribution
Meng, H., Chronopoulos, D., & Fabro, A. T. (2019, September). Towards Optimal Design of Rainbow Metamaterials. Presented at 14th International Conference on Vibration Problems, Hersonissos, Crete, Greece

Nonperiodic metamaterials can have better vibration attenuation than periodic metamaterials with properly designed resonator distributions. In this study, we propose optimal design routes for rainbow metamaterials. The rainbow metamaterials are nonpe... Read More about Towards Optimal Design of Rainbow Metamaterials.

Modelling Fringe Projection Based on Linear Systems Theory and Geometric Transformation (2019)
Presentation / Conference Contribution
Gayton, G., Su, R., & Leach, R. (2019, September). Modelling Fringe Projection Based on Linear Systems Theory and Geometric Transformation. Presented at 14th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII2019), Niigata, Japan

Fringe projection measurement techniques offer fast, non-contact measurements of the surface form of manufactured parts at relatively low cost. Recent advances in fringe projection have reduced measurement errors from effects such as multiple surface... Read More about Modelling Fringe Projection Based on Linear Systems Theory and Geometric Transformation.

Simplified Lumped Parameter Thermal Network for Short-Duty Dual Three-Phase Permanent Magnet Machines (2019)
Presentation / Conference Contribution
Giangrande, P., Madonna, V., Zhao, W., Wang, Y., Gerada, C., & Galea, M. (2019, August). Simplified Lumped Parameter Thermal Network for Short-Duty Dual Three-Phase Permanent Magnet Machines. Presented at 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), Harbin, China

© 2019 IEEE. Electrical machines are progressively being employed in an ever-increasing number of safety-critical applications (e.g. aerospace and automotive), which demand high performance as well as reliability features. The modular structure and t... Read More about Simplified Lumped Parameter Thermal Network for Short-Duty Dual Three-Phase Permanent Magnet Machines.

Insulation Capacitance as Diagnostic Marker for Thermally Aged, Low Voltage Electrical Machines (2019)
Presentation / Conference Contribution
Madonna, V., Giangrande, P., Zhao, W., Wang, Y., Zhang, H., & Galea, M. (2019, August). Insulation Capacitance as Diagnostic Marker for Thermally Aged, Low Voltage Electrical Machines. Presented at 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), Harbin, China

© 2019 IEEE. Thermal aging is considered as the principal insulation stress factor in low voltage electrical machines (EMs). Once the insulation reaches its end-of-life, a complete EM out of service can be caused within few operating cycles/hours. In... Read More about Insulation Capacitance as Diagnostic Marker for Thermally Aged, Low Voltage Electrical Machines.