Outputs (632)

Modelling of Polymer Electrolyte Membrane Electrolyzer Degradation and Reliability (2025)
Presentation / Conference Contribution
Ubale, S., Remenyte-Prescott, R., Grant, D., Stuart, A., Hague, A., & Saleh, A. (2025, June). Modelling of Polymer Electrolyte Membrane Electrolyzer Degradation and Reliability. Presented at 35th European Safety and Reliability & the 33rd Society for Risk Analysis Europe Conference, Stavanger, Norway

Hydrogen production using electrolyzers can contribute to reduction in global emissions. A Polymer Electrolyte Membrane electrolyzer (PEME) splits water into hydrogen and oxygen, offering advantages in dynamic operation that enables rapid responses t... Read More about Modelling of Polymer Electrolyte Membrane Electrolyzer Degradation and Reliability.

Two for the road: an exploratory study investigating driver and co-passenger interactions during automation and the transition of control in a level 3 automated vehicle (2025)
Journal Article
Large, D., Harvey, C., Shaw, E., Khandeparker, S., Burnett, G., & Box, E. (2025). Two for the road: an exploratory study investigating driver and co-passenger interactions during automation and the transition of control in a level 3 automated vehicle. Advances in Transportation Studies, 66, 125-144

To explore the impact of a front-seat passenger during SAE level 3 (L3) automation, eighteen established driver-passenger pairings undertook three 30-minute journeys framed as ‘days-out’ in a L3 driving simulator. Participants were reminded of their... Read More about Two for the road: an exploratory study investigating driver and co-passenger interactions during automation and the transition of control in a level 3 automated vehicle.

Practical Crystallography with a Transmission Electron Microscope (2025)
Preprint / Working Paper
Weare, B. L., Fung, K. L. Y., Cardillo-Zallo, I., Cull, W. J., Fay, M. W., Argent, S. P., & Brown, P. D. Practical Crystallography with a Transmission Electron Microscope

Three-dimensional electron diffraction (3DED) is a powerful technique providing for crystal structure solutions of sub-micron sized crystals too small for structure determination via X-ray techniques. The entry requirement, however, of a transmission... Read More about Practical Crystallography with a Transmission Electron Microscope.

Photonic Annealing of Inkjet Printed Graphene for Stretchable Wearable Healthcare Monitoring Devices (2025)
Journal Article
Heaton, C. E. D., Austin, J. S., Ruer, L., Cottam, N. D., Wang, F., He, Y., Rance, G. A., Rose, F. R. A. J., Wildman, R. D., Hague, R. J. M., Makarovsky, O., & Turyanska, L. (2025). Photonic Annealing of Inkjet Printed Graphene for Stretchable Wearable Healthcare Monitoring Devices. Advanced Materials Technologies, Article e00913. https://doi.org/10.1002/admt.202500913

Inkjet-printing of graphene (iGr) onto flexible and stretchable electronics has significant potential for environmental sensing and healthcare monitoring applications. However, conventional thermal annealing techniques often require high temperatures... Read More about Photonic Annealing of Inkjet Printed Graphene for Stretchable Wearable Healthcare Monitoring Devices.

Challenges in the Diagnosis of Biliary Stricture and Cholangiocarcinoma and Perspectives on the Future Applications of Advanced Technologies (2025)
Journal Article
Gaston, K., Mohammad, A., Venkatachalapathy, S. V., Notingher, I., Gordon, G. S. D., Arora, A., Rawson, F. J., Grove, J. I., Mukherjee, A., Gomez, D., Jayaraman, P.-S., & Aithal, G. P. (2025). Challenges in the Diagnosis of Biliary Stricture and Cholangiocarcinoma and Perspectives on the Future Applications of Advanced Technologies. Cancers, 17(14), Article 2301. https://doi.org/10.3390/cancers17142301

In the management of cholangiocarcinoma, effective biliary drainage and accurate diagnosis are vital to allow further treatment. Confirmation of tissue diagnosis and molecular characterization is also required to guide future treatment options includ... Read More about Challenges in the Diagnosis of Biliary Stricture and Cholangiocarcinoma and Perspectives on the Future Applications of Advanced Technologies.

Immunomodulator loaded microneedle arrays for targeted intradermal drug delivery to skin tumors (2025)
Journal Article
Sabri, A. H., Smith, F., Cater, Z., Gurnani, P., Nash, A., Brentville, V., Durrant, L., McKenna, J., Segal, J., Scurr, D. J., & Marlow, M. (2025). Immunomodulator loaded microneedle arrays for targeted intradermal drug delivery to skin tumors. Drug Delivery, 32(1), Article 2527824. https://doi.org/10.1080/10717544.2025.2527824

Topical therapy with imiquimod in a cream [5% w/w imiquimod cream (Aldara™)] for the treatment of nodular basal cell carcinoma (BCC) currently results in low cure rates, attributed to low imiquimod permeation. Herein we have developed novel microneed... Read More about Immunomodulator loaded microneedle arrays for targeted intradermal drug delivery to skin tumors.

Enhanced heat transfer of PCM-based heat sink augmented with plate-fins and hybrid nanoparticles for electronics cooling (2025)
Journal Article
Arshad, A., Jabbal, M., & Yan, Y. (2025). Enhanced heat transfer of PCM-based heat sink augmented with plate-fins and hybrid nanoparticles for electronics cooling. International Journal of Thermal Sciences, 218, Article 110107. https://doi.org/10.1016/j.ijthermalsci.2025.110107

Passive cooling technologies based on phase change material (PCM) reveal as emerging technique for thermal management of electronic components effciently. Therefore, the current study explores the combined effect of hybrid nanoparticles (HNPs), plate... Read More about Enhanced heat transfer of PCM-based heat sink augmented with plate-fins and hybrid nanoparticles for electronics cooling.

Mapping the adaptive landscape of Batesian mimicry using 3D-printed stimuli (2025)
Journal Article
Taylor, C. H., Watson, D. J. G., Skelhorn, J., Bell, D., Burdett, S., Codyre, A., Cooley, K., Davies, J. R., Dawson, J. J., D’Cruz, T., Gandhi, S. R., Jackson, H. J., Lowe, R., Ogilvie, E., Pond, A. L., Rees, H., Richardson, J., Sains, J., Short, F., Brignell, C., …Reader, T. (2025). Mapping the adaptive landscape of Batesian mimicry using 3D-printed stimuli. Nature, https://doi.org/10.1038/s41586-025-09216-3

In a classic example of adaptation, harmless Batesian mimics gain protection from predators through resemblance to one or more unpalatable models. Mimics vary greatly in accuracy, and explaining the persistence of inaccurate mimics is an ongoing chal... Read More about Mapping the adaptive landscape of Batesian mimicry using 3D-printed stimuli.

Pattern formation on an ice surface (2025)
Journal Article
Wang, Z., Choi, K.-S., Li, S., Sun, C., & Mao, X. (2025). Pattern formation on an ice surface. Journal of Fluid Mechanics, 1013, Article A35. https://doi.org/10.1017/jfm.2025.10265

A linear stability model based on a phase-field method is established to study the formation of ripples on the ice surface. The pattern on horizontal ice surfaces, e.g. glaciers and frozen lakes, is found to be originating from a gravity-driven insta... Read More about Pattern formation on an ice surface.

Polyglycerol Resin Towards Sustainable 3D-Printing (2025)
Journal Article
George, K., Krumins, E., Tan, E., He, Y., Wildman, R. D., Owen, R., Segal, J., Cuzzucoli Crucitti, V., & Taresco, V. (2025). Polyglycerol Resin Towards Sustainable 3D-Printing. Faraday Discussions, https://doi.org/10.1039/d5fd00043b

Additive manufacturing (AM) techniques, also named as three-dimensional 3D-printing, have been widely recognised as promising technologies for rapid production of novel, personalised drug-delivery systems, scaffolds for biofabrication, food applicati... Read More about Polyglycerol Resin Towards Sustainable 3D-Printing.