Skip to main content

Research Repository

Advanced Search

Outputs (20)

Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity (2023)
Journal Article
Li, Z., Xu, Z., Zhang, F., Gerada, D., Guo, R., Zhang, H., …Zhang, C. (2023). Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity. IEEE Transactions on Transportation Electrification, 1-1. https://doi.org/10.1109/TTE.2023.3262766

Litz wires are widely used in electrical machines with reduced AC losses, compared to traditional random winding. The reduced AC losses can improve both electrical machines electromagnetic performance, such as efficiency and thermal performance. Ther... Read More about Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity.

Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction (2022)
Journal Article
Zou, T., Gerada, D., La Rocca, S., La Rocca, A., Walker, A., Vakil, G., …Gerada, C. (2023). Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction. IEEE Transactions on Industry Applications, 59(2), 1557-1570. https://doi.org/10.1109/TIA.2022.3225255

Synchronous reluctance (Syn-Rel) machines with embedded permanent magnets (PMs) are research hotspots in variable speed motor drives due to their robust rotor structure and wide constant power speed range (CPSR). In this paper, the potential of PM-as... Read More about Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction.

Performance Entitlement by Using Novel High Strength Electrical Steels and Copper Alloys for High-Speed Laminated Rotor Induction Machines (2022)
Journal Article
Zhang, F., Gerada, D., Xu, Z., He, Y., Zhang, H., Hua, W., & Gerada, C. (2022). Performance Entitlement by Using Novel High Strength Electrical Steels and Copper Alloys for High-Speed Laminated Rotor Induction Machines. Electronics, 11(2), 210. https://doi.org/10.3390/electronics11020210

The laminated rotor Induction Machine (IM), with its simple construction and manufacturing, robustness, ease of control and comparatively lower cost remains by far the most utilized electromechanical energy converter. At very high speeds, traditional... Read More about Performance Entitlement by Using Novel High Strength Electrical Steels and Copper Alloys for High-Speed Laminated Rotor Induction Machines.

Improved Thermal Modeling and Experimental Validation of Oil-Flooded High-Performance Machines with Slot-Channel Cooling (2021)
Journal Article
Zhang, F., Gerada, D., Xu, Z., Zhang, X., Zhang, H., Gerada, C., …Degano, M. (2022). Improved Thermal Modeling and Experimental Validation of Oil-Flooded High-Performance Machines with Slot-Channel Cooling. IEEE Transactions on Transportation Electrification, 8(1), 312-324. https://doi.org/10.1109/TTE.2021.3106819

Thermal management is often considered a bottleneck in the pursuit of the next-generation electrical machines for electrified transportation with a step change in power density. Slot-channel cooling is considered to be an effective cooling technique,... Read More about Improved Thermal Modeling and Experimental Validation of Oil-Flooded High-Performance Machines with Slot-Channel Cooling.

Electrical Machine Slot Thermal Condition Effects on Back Iron Extension Thermal Benefits (2021)
Journal Article
Zhang, F., Gerada, D., Xu, Z., Tighe, C., Zhang, H., Yan, L., & Gerada, C. (2021). Electrical Machine Slot Thermal Condition Effects on Back Iron Extension Thermal Benefits. IEEE Transactions on Transportation Electrification, 7(4), 2927-2938. https://doi.org/10.1109/tte.2021.3085822

The slot thermal condition is critical for thermal management of high-performance electrical machines, due to the high heat losses and poor heat transfer ability within the slot. With a part of the back iron projected radially downward into the slot,... Read More about Electrical Machine Slot Thermal Condition Effects on Back Iron Extension Thermal Benefits.

4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft (2021)
Journal Article
Golovanov, D., Gerada, D., Sala, G., Degano, M., Trentin, A., Connor, P. H., …Gerada, C. (2021). 4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft. IEEE Transactions on Transportation Electrification, 7(4), 2952-2964. https://doi.org/10.1109/TTE.2021.3068928

This article describes the underpinning research, development, construction, and testing of a 4-MW multithree phase generator designed for a hybrid-electric aircraft propulsion system demonstrator. The aim of the work is to demonstrate gravimetric po... Read More about 4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft.

Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation (2020)
Journal Article
Trentin, A., Sala, G., Tarisciotti, L., Galassini, A., Degano, M., Connor, P. H., …Gerada, C. (2021). Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation. IEEE Transactions on Industrial Electronics, 68(12), 11684-11695. https://doi.org/10.1109/TIE.2020.3040692

In this article, we describe the research and development of a 3 kV active rectifier for a 4 MW aerospace generator drive system demonstrator. The converter is fed by a multiphase high-speed/high-frequency permanent magnet generator. The main aim of... Read More about Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation.

Experimental study of thermal fracturing of Hot Dry Rock irradiated by moving laser beam: Temperature, efficiency and porosity (2020)
Journal Article
Wang, Y., Jiang, J., Darkwa, J., Xu, Z., Zheng, X., & Zhou, G. (2020). Experimental study of thermal fracturing of Hot Dry Rock irradiated by moving laser beam: Temperature, efficiency and porosity. Renewable Energy, 160, 803-816. https://doi.org/10.1016/j.renene.2020.06.138

A new laser irradiation fracturing method is employed to crack the Hot Dry Rock (HDR) and variations of rock temperature, specific energy (SE) and modified specific energy (MSE), thermal damages and open porosity of granite samples caused by moving l... Read More about Experimental study of thermal fracturing of Hot Dry Rock irradiated by moving laser beam: Temperature, efficiency and porosity.

Analytical Model of Modular Spoke-Type Permanent Magnet Machines for In-Wheel Traction Applications (2020)
Journal Article
Zhang, H., Hua, W., Gerada, D., Xu, Z., & Gerada, C. (2020). Analytical Model of Modular Spoke-Type Permanent Magnet Machines for In-Wheel Traction Applications. IEEE Transactions on Energy Conversion, 35(3), 1289-1300. https://doi.org/10.1109/tec.2020.2979886

This paper proposes an analytical model of modular spoke-type permanent magnet (MSTPM) machines based on air-gap field modulation (AFM) theory. Firstly, a fundamental AFM model of open-circuit MSTPM machines is introduced. The open-circuit air-gap fi... Read More about Analytical Model of Modular Spoke-Type Permanent Magnet Machines for In-Wheel Traction Applications.

Thermal Model Approach to Multisector Three-Phase Electrical Machines (2020)
Journal Article
Zhang, H., Giangrande, P., Sala, G., Xu, Z., Hua, W., Madonna, V., …Gerada, C. (2021). Thermal Model Approach to Multisector Three-Phase Electrical Machines. IEEE Transactions on Industrial Electronics, 68(4), 2919-2930. https://doi.org/10.1109/TIE.2020.2977559

© 1982-2012 IEEE. Multisector machines reveal a high fault-tolerant capability, since failure events can be isolated by de-energizing the faulty sector, while the healthy ones contribute in delivering the required power. This article is focused on th... Read More about Thermal Model Approach to Multisector Three-Phase Electrical Machines.

Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines (2019)
Journal Article
Bardalai, A., Gerada, D., Golovanov, D., Xu, Z., Zhang, X., Li, J., …Gerada, C. (2020). Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines. IEEE Transactions on Industry Applications, 56(1), 183-193. https://doi.org/10.1109/TIA.2019.2947552

© 1972-2012 IEEE. In the design of electrical machines, the increase in power density has become one of the main research themes. With most of the power loss in high power density electrical machines often being generated in the stator winding assemb... Read More about Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines.

Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure (2019)
Journal Article
Liu, X., Gerada, D., Xu, Z., Corfield, M., Gerada, C., & Yu, H. (2020). Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure. IEEE Transactions on Industrial Electronics, 67(4), 2667-2677. https://doi.org/10.1109/tie.2019.2910031

Litz wires are employed in high-frequency electrical machines due to their advantages of reducing the ac losses, including minimizing the skin effect and the proximity effect. In order to improve the reliability of such machines, and enable accurate... Read More about Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure.

Dynamic response of hybrid carbon fibre laminate beams under ballistic impact (2018)
Journal Article
Zhang, Y., Liu, T., & Xu, Z. (2018). Dynamic response of hybrid carbon fibre laminate beams under ballistic impact. Composite Structures, 210, 409-420. https://doi.org/10.1016/j.compstruct.2018.11.049

This novel hybrid fibre composites combining stiff composites with soft composites are developed to improve the ballistic impact resistance of composite beams while maintaining good quasi-static loading bearing capacity. The ballistic impact performa... Read More about Dynamic response of hybrid carbon fibre laminate beams under ballistic impact.

Development of aircraft electric starter-generator system based-on active rectification technology (2018)
Journal Article
Bozhko, S., Yang, T., Le Peuvedic, J., Arumugam, P., Degano, M., La Rocca, A., …Wheeler, P. (2018). Development of aircraft electric starter-generator system based-on active rectification technology. IEEE Transactions on Transportation Electrification, 4(4), 985-996. https://doi.org/10.1109/TTE.2018.2863031

More-electric aircraft (MEA) has become a dominant trend for modern aircraft. On-board MEA, many functions, which are conventionally driven by pneumatic and hydraulic power, are replaced with electrical subsystems. Starting aircraft engines with an e... Read More about Development of aircraft electric starter-generator system based-on active rectification technology.

Design and losses analysis of a high power density machine for flooded pump applications (2018)
Journal Article
Al-Timimy, A., Giangrande, P., Degano, M., Zeyuan, X., Galea, M., Gerada, C., …Xia, L. (2019). Design and losses analysis of a high power density machine for flooded pump applications. IEEE Transactions on Industry Applications, 54(4), 3260-3270. https://doi.org/10.1109/TIA.2018.2821623

This paper describes the design process of a 10 kW 19000 rpm high power density surface mounted permanent magnet synchronous machine for a directly coupled pump application. In order to meet the required specifications, a compact machine, with coolin... Read More about Design and losses analysis of a high power density machine for flooded pump applications.

Multi-domain optimization of high power-density PM electrical machines for system architecture selection (2017)
Journal Article
Golovanov, D., Papini, L., Gerada, D., Xu, Z., & Gerada, C. (2018). Multi-domain optimization of high power-density PM electrical machines for system architecture selection. IEEE Transactions on Industrial Electronics, 65(7), 5302-5312. https://doi.org/10.1109/TIE.2017.2772188

The power density of electrical machines for transport applications has become a critical aspect and target of optimization. This paper looks at the development of an intelligent, rapid, flexible, and multidomain tool to aid for system-level optimiza... Read More about Multi-domain optimization of high power-density PM electrical machines for system architecture selection.

Continuous Photo-Oxidation in a Vortex Reactor: Efficient Operations Using Air Drawn from the Laboratory (2017)
Journal Article
Lee, D. S., Amara, Z., Clark, C. A., Xu, Z., Kakimpa, B., Morvan, H. P., …George, M. W. (2017). Continuous Photo-Oxidation in a Vortex Reactor: Efficient Operations Using Air Drawn from the Laboratory. Organic Process Research and Development, 21(7), 1042-1050. https://doi.org/10.1021/acs.oprd.7b00153

© 2017 American Chemical Society. We report the construction and use of a vortex reactor which uses a rapidly rotating cylinder to generate Taylor vortices for continuous flow thermal and photochemical reactions. The reactor is designed to operate un... Read More about Continuous Photo-Oxidation in a Vortex Reactor: Efficient Operations Using Air Drawn from the Laboratory.