All Outputs (85)

Flux-Density Harmonics Analysis of Switched-Flux Permanent Magnet Machines (2019)
Journal Article
Zeng, Z., Shen, Y., Lu, Q., Gerada, D., Wu, B., Huang, X., & Gerada, C. (2019). Flux-Density Harmonics Analysis of Switched-Flux Permanent Magnet Machines. IEEE Transactions on Magnetics, 55(6), 1-7. https://doi.org/10.1109/tmag.2019.2908250

By developing a simple permeance-magnetomotive force (MMF) model of switched-flux permanent magnet (SFPM) machines, the air-gap flux density produced by both PMs and armature current can be derived, in which harmonics with the same order and rotation... Read More about Flux-Density Harmonics Analysis of Switched-Flux Permanent Magnet Machines.

Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure (2019)
Journal Article
Liu, X., Gerada, D., Xu, Z., Corfield, M., Gerada, C., & Yu, H. (2020). Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure. IEEE Transactions on Industrial Electronics, 67(4), 2667-2677. https://doi.org/10.1109/tie.2019.2910031

Litz wires are employed in high-frequency electrical machines due to their advantages of reducing the ac losses, including minimizing the skin effect and the proximity effect. In order to improve the reliability of such machines, and enable accurate... Read More about Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure.

Back-Iron Extension Thermal Benefits for Electrical Machines With Concentrated Windings (2019)
Journal Article
Zhang, F., Gerada, D., Xu, Z., Zhang, X., Tighe, C., Zhang, H., & Gerada, C. (2020). Back-Iron Extension Thermal Benefits for Electrical Machines With Concentrated Windings. IEEE Transactions on Industrial Electronics, 67(3), 1728-1738. https://doi.org/10.1109/tie.2019.2903758

The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines (2019)
Journal Article
Zhang, H., Hua, W., Hu, M., Gerada, D., & Gerada, C. (2019). The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines. IEEE Transactions on Magnetics, 55(7), Article 8104205. https://doi.org/10.1109/tmag.2018.2886686

The main purpose of this paper is to investigate the influence of winding location on back electromotive force (EMF) and armature inductance in flux-switching permanent-magnet (FSPM) machines. To obtain an analytical solution, a double-stator-pitch m... Read More about The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines.

A Holistic Electrical Machine Design Tool for More-Electric and Hybrid-Electric Aircraft (2018)
Conference Proceeding
Golovanov, D., Xu, Z., Gerada, D., Gerada, C., & Papini, L. (2018). A Holistic Electrical Machine Design Tool for More-Electric and Hybrid-Electric Aircraft. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) ( 1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607715

The power density of electrical machines required for more-electric and hybrid-electric aircraft has become a critical aspect and target of optimization. This paper looks at the development aspects of a multi-domain tool to aid for system-level optim... Read More about A Holistic Electrical Machine Design Tool for More-Electric and Hybrid-Electric Aircraft.

Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft (2018)
Conference Proceeding
Li, Y., Zhang, Z., Gerada, D., & Gerada, C. (2018). Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607694

The generation performance of the switched reluctance machine (SRM)-based starter/generator (S/G) and the doubly salient electromagnetic machine (DSEM)-based S/G is analyzed and compared in this paper. The topologies, operation principles of the doub... Read More about Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft.

Design and Mathematical Modeling of Gearless SMC Flux Reversal Motor (2018)
Conference Proceeding
Prakht, V., Golovanov, D., Dmitrievskii, V., Gerada, D., & Kazakbaev, V. (2018). Design and Mathematical Modeling of Gearless SMC Flux Reversal Motor. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607567

© 2018 IEEE. This paper considers the design of a three-phase gearless flux reversal machine (FRM) with permanent magnets (PM) mounted on the stator. Its stator magnetic core is made of a solid soft magnetic composite material (SMC) with a slot for l... Read More about Design and Mathematical Modeling of Gearless SMC Flux Reversal Motor.

The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft (2018)
Conference Proceeding
Golovanov, D., Xu, Z., Gerada, D., Degano, M., Vakil, G., & Gerada, C. (2018). The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft. In 2018 21st International Conference on Electrical Machines and Systems (ICEMS) (169-173). https://doi.org/10.23919/ICEMS.2018.8549390

Maximizing the power density as well as efficiency are two of the main critical aspects for engineers who are designing electrical machines for aerospace applications. Iron losses have a significant impact on the total machine efficiency, thermal sta... Read More about The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft.

Space vectors and pseudo inverse matrix methods for the radial force control in bearingless multi-sector permanent magnet machines (2018)
Journal Article
Sala, G., Valente, G., Formentini, A., Papini, L., Gerada, D., Zanchetta, P., …Gerada, C. (2018). Space vectors and pseudo inverse matrix methods for the radial force control in bearingless multi-sector permanent magnet machines. IEEE Transactions on Industrial Electronics, 65(9), 6912-6922. https://doi.org/10.1109/TIE.2018.2795590

Two different approaches to characterize the torque and radial force production in a Bearingless Multi-Sector Permanent Magnet (BMSPM) machine are presented in this work. The first method consists of modelling the motor in terms of torque and force p... Read More about Space vectors and pseudo inverse matrix methods for the radial force control in bearingless multi-sector permanent magnet machines.

A semi-flooded cooling for a high speed machine: Concept, design and practice of an oil sleeve (2017)
Conference Proceeding
Xu, Z., La Rocca, A., Arumugam, P., Pickering, S. J., Gerada, C., Bozhko, S., …Zhang, H. (2017). A semi-flooded cooling for a high speed machine: Concept, design and practice of an oil sleeve. In Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society (8557-8562). https://doi.org/10.1109/IECON.2017.8217503

This paper proposes a semi-flooded cooling concept for a high speed machine design. The electrical machine considered is for an aircraft starter-generator system where power density and efficiency are crucial. In order to achieve the high power densi... Read More about A semi-flooded cooling for a high speed machine: Concept, design and practice of an oil sleeve.

Multi-domain optimization of high power-density PM electrical machines for system architecture selection (2017)
Journal Article
Golovanov, D., Papini, L., Gerada, D., Xu, Z., & Gerada, C. (2018). Multi-domain optimization of high power-density PM electrical machines for system architecture selection. IEEE Transactions on Industrial Electronics, 65(7), 5302-5312. https://doi.org/10.1109/TIE.2017.2772188

The power density of electrical machines for transport applications has become a critical aspect and target of optimization. This paper looks at the development of an intelligent, rapid, flexible, and multidomain tool to aid for system-level optimiza... Read More about Multi-domain optimization of high power-density PM electrical machines for system architecture selection.

Thermal investigation on HSPM with new alloy sleeve (2017)
Conference Proceeding
Zhang, X., Li, W., Zhang, H., Gerada, C., Gerada, D., & Li, J. (2017). Thermal investigation on HSPM with new alloy sleeve. . https://doi.org/10.1109/ICEMS.2017.8056423

This paper presents a developed copper-iron alloy which made as the rotor sleeve in a high speed permanent magnetic machine (HSPMG), whist investigating its benefits in improve machine thermal performance. The features of the new alloy is experimenta... Read More about Thermal investigation on HSPM with new alloy sleeve.

Holistic electrical machine optimization for system integration (2017)
Conference Proceeding
Gerada, D., Golovanov, D., Xu, Z., Papini, L., Degano, M., Zhang, H., & Gerada, C. (2017). Holistic electrical machine optimization for system integration. In 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia) (980-985). https://doi.org/10.1109/IFEEC.2017.7992174

The power density of electrical machines required for transport applications has become a critical aspect and target of optimization. This paper looks at the development aspects of a multi-domain tool to aid for system-level optimization of electrica... Read More about Holistic electrical machine optimization for system integration.

Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system (2017)
Journal Article
Guo, Q., Zhang, C., Li, L., Gerada, D., Zhang, J., & Wang, M. (2017). Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system. Applied Energy, 204, https://doi.org/10.1016/j.apenergy.2017.05.023

As a main driving force of electric vehicles (EVs), the losses of in-wheel permanent-magnet synchronous motor (PMSM) direct drive system can seriously affect the energy consumption of EVs. This paper proposes a loss optimization control strategy for... Read More about Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system.

Radial force control for triple three-phase sectored SPM machines. Part II: Open winding fault tolerant control (2017)
Conference Proceeding
Sala, G., Gerada, D., Gerada, C., & Tani, A. (2017). Radial force control for triple three-phase sectored SPM machines. Part II: Open winding fault tolerant control.

A new advanced fault tolerant control technique for a triple three-phase Surface Permanent Magnet (SPM) machine is investigated in this paper. The machine has a nine-phase winding arranged in three sectors and supplied by three different Voltage Sour... Read More about Radial force control for triple three-phase sectored SPM machines. Part II: Open winding fault tolerant control.

Radial force control for triple three-phase sectored SPM machines. Part I: Machine model (2017)
Conference Proceeding
Sala, G., Gerada, D., Gerada, C., & Tani, A. (2017). Radial force control for triple three-phase sectored SPM machines. Part I: Machine model.

The radial force control technique for a triple three-phase Surface Permanent Magnet (SPM) machine is investigated in this paper. The machine has a nine-phase winding arranged in three sectors and supplied by three different Voltage Source Inverters... Read More about Radial force control for triple three-phase sectored SPM machines. Part I: Machine model.

Design and control of segmented triple three-phase SPM machines for fault tolerant drives (2017)
Conference Proceeding
Sala, G., Gerada, D., Gerada, C., & Tani, A. (2017). Design and control of segmented triple three-phase SPM machines for fault tolerant drives.

A new multiphase Surface Permanent Magnet (SPM) machine design is investigated in this paper. The machine has a nine-phase winding arranged in three sectors and supplied by three different Voltage Source Inverters (VSI). Stator segmentation between t... Read More about Design and control of segmented triple three-phase SPM machines for fault tolerant drives.

CQICO and multiobjective thermal optimization for high-speed PM generator (2017)
Journal Article
Zhang, X., Li, W., Gerada, C., Zhang, H., Li, J., Galea, M., …Cao, J. (2017). CQICO and multiobjective thermal optimization for high-speed PM generator. IEEE Transactions on Magnetics, 53(6), https://doi.org/10.1109/TMAG.2017.2658187

This paper proposes a novel Continuous Quantum Immune Clonal Optimization (CQICO) algorithm for thermal optimization on an 117kW high speed permanent magnet generator (HSPMG). The proposed algorithm mixes the Quantum Computation into the Immune Cloni... Read More about CQICO and multiobjective thermal optimization for high-speed PM generator.

Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets (2016)
Conference Proceeding
Walker, A., Galea, M., Gerada, D., Gerada, C., Mebraki, A., & Brown, N. (2016). Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets. In Proceedings - 2016 XXII International Conference on Electrical Machines (ICEM) (1611-1617). https://doi.org/10.1109/ICELMACH.2016.7732739

This paper details the design process of a high performance electrical machine with the objective of achieving US Department of Energy FreedomCar 2020 targets, namely meeting the high speed efficiency requirement without sacrificing performance elsew... Read More about Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets.

High speed drives review: machines, converters and applications (2016)
Conference Proceeding
Abebe, R., Di Nardo, M., Gerada, D., Lo Calzo, G., Papini, L., & Gerada, C. (2016). High speed drives review: machines, converters and applications.

The development of new power electronic device and high performance magnetic materials are the main technological factors that have led both industries and research community to focus their attention on high speed electrical drives. Several papers ha... Read More about High speed drives review: machines, converters and applications.