Skip to main content

Research Repository

Advanced Search

All Outputs (224)

Dependent and Dynamic Tree Theory (D2T2 ) for Event Tree Applications (2023)
Presentation / Conference
Tolo, S., & Andrews, J. (2023, April). Dependent and Dynamic Tree Theory (D2T2 ) for Event Tree Applications. Presented at 62nd ESReDA Seminar, University of Twente, the Netherlands

The demand for innovative and effective computational tools able to improve the accuracy of present modelling methodologies has been fuelled by the ever-increasing complexity of engineering systems. In spite of their shortcomings, such as their inabi... Read More about Dependent and Dynamic Tree Theory (D2T2 ) for Event Tree Applications.

The Dynamic and Dependent Tree Theory (D2T2 ) methodology Developed for Fault Tree Analysis (2023)
Presentation / Conference
Andrews, J., & Tolo, S. (2023, April). The Dynamic and Dependent Tree Theory (D2T2 ) methodology Developed for Fault Tree Analysis. Presented at 62nd ESReDA Seminar, University of Twente, the Netherlands

Fault Tree Analysis (FTA) has its origins back in the 1960’s with the mathematical framework, known as Kinetic Tree Theory (KTT) added at the end of the decade by Vesely. In KTT the analysis of the fault tree is performed in two stages. The first sta... Read More about The Dynamic and Dependent Tree Theory (D2T2 ) methodology Developed for Fault Tree Analysis.

Fault Tree to Petri Net Conversion for the Analysis of a Standby System (2023)
Presentation / Conference
Prescott, D. (2023, April). Fault Tree to Petri Net Conversion for the Analysis of a Standby System. Presented at 62nd ESReDA Seminar, University of Twente, the Netherlands

Although fault trees are widely used, their quantitative analysis is limited by the need for basic event independence. Dynamic and Dependent Tree Theory (D2T 2 ) has been proposed to overcome this limitation and requires dependent system fault tree e... Read More about Fault Tree to Petri Net Conversion for the Analysis of a Standby System.

Home based remotely supervised tDCS in children with acquired brain injury: a feasibility study protocol (2023)
Presentation / Conference
Stein, A., Iyer, K., Dux, P., Friehs, M., Riddle, J., Craven, M., …Barlow, K. (2023, February). Home based remotely supervised tDCS in children with acquired brain injury: a feasibility study protocol. Poster presented at 5th International Brain Stimulation Conference, Lisbon, Portugal

Introduction: Traumatic brain injury (TBI) is the most common acquired brain injury (ABI), where 16% of children sustain at least one TBI requiring medical attention, and 25-30% experience chronic problems. Attention and concentration problems are am... Read More about Home based remotely supervised tDCS in children with acquired brain injury: a feasibility study protocol.

Shape and Structure Preserving Differential Privacy (2022)
Presentation / Conference
Soto, C., Bharath, K., Reimherr, M., & Slavkovic, A. (2022, November). Shape and Structure Preserving Differential Privacy. Poster presented at Thirty-sixth Conference on Neural Information Processing Systems (NeurIPS 2022), New Orleans, USA

It is common for data structures such as images and shapes of 2D objects to be represented as points on a manifold. The utility of a mechanism to produce sanitized differentially private estimates from such data is intimately linked to how compatible... Read More about Shape and Structure Preserving Differential Privacy.

DOIs And Handles In Repositories (UKRI OA PID Workshop) (2022)
Presentation / Conference
Fraser, K. (2022, October). DOIs And Handles In Repositories (UKRI OA PID Workshop). Presented at UKRI OA PID Workshop #2, Online

The UKRI open access policy requires that Persistent Identifiers (PIDs) for articles must be implemented according to international recognised standards, but leaves our options open, mentioning Digital Object Identifiers (DOI), Uniform Resource Name... Read More about DOIs And Handles In Repositories (UKRI OA PID Workshop).

The journey from co-creation to impact for digital resources in healthcare (2022)
Presentation / Conference
Pears, M., Henderson, J., Wharrad, H., & KONSTANTINIDIS, S. (2022, September). The journey from co-creation to impact for digital resources in healthcare. Presented at ALT Annual Conference 2022, Manchester, UK

Co-creating digital resources in healthcare has many processes, pitfalls, and parameters. The development and transition from co-creation to impact requires effective knowledge exchange. This discussion panel will provide opportunity for attendees to... Read More about The journey from co-creation to impact for digital resources in healthcare.

Done in 60 minutes! Best practices, crowdsourcing, co-creation, and design principals of educational chatbots (2022)
Presentation / Conference
Henderson, J., Pears, M., & Konstantinidis, S. (2022, September). Done in 60 minutes! Best practices, crowdsourcing, co-creation, and design principals of educational chatbots. Presented at ALT Annual Conference 2022, Manchester, UK

Unlike banking, hospitality, and travel, the education sector is lacking in prolific and effective uses of chatbots for learning. Expert- and research- driven recommendations, online tools, and workshops for contemporary approaches are slim. This wor... Read More about Done in 60 minutes! Best practices, crowdsourcing, co-creation, and design principals of educational chatbots.

An Adaptive, Repeatable and Rapid Auto-Reconfiguration Process in a Smart Manufacturing System for Small Box Assembly (2022)
Presentation / Conference
Wang, Z., Kendall, P., Gumma, K., Turner, A., & Ratchev, S. (2022, August). An Adaptive, Repeatable and Rapid Auto-Reconfiguration Process in a Smart Manufacturing System for Small Box Assembly. Paper presented at 2022 IEEE 18th International Conference on Automation Science and Engineering (CASE), Mexico City, Mexico and Chengdu, China

With increasing demand for productivity, flexibility , and sustainability, there is the need for a flexible manufacturing system that is auto-reconfigurable for variations in product types and assembly processes. However, the repeata-bility of reconf... Read More about An Adaptive, Repeatable and Rapid Auto-Reconfiguration Process in a Smart Manufacturing System for Small Box Assembly.

Can simultaneous PIV in the gas and liquid phases provide insight into the transfer of momentum between the two phases? (2022)
Presentation / Conference
Kim, J. H., Hann, D. B., Eastwick, C. M., & Cherdantsev, A. V. (2022, July). Can simultaneous PIV in the gas and liquid phases provide insight into the transfer of momentum between the two phases?. Paper presented at 20th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics, Lisbon, Portugal

Understanding the interaction between a gas shearing over a liquid film and the liquid film is essential if we wish to use modeling to optimize systems to decrease environmental impact, increase efficiency and hence productivity. To this end, PIV is... Read More about Can simultaneous PIV in the gas and liquid phases provide insight into the transfer of momentum between the two phases?.

High Code Density and Humidity Sensor Chipless RFID Tag (2022)
Presentation / Conference
Ali, A., Williams, O., Lester, E., & Greedy, S. (2022, July). High Code Density and Humidity Sensor Chipless RFID Tag. Paper presented at 2022 7th International Conference on Smart and Sustainable Technologies, SpliTech 2022, Split / Bol, Croatia

This article presents a low cost, miniaturize, flexible, high code density chipless sensor tag. The tag is designed on polyethylene terephthalate (PET) substrate with a compact size of 1cm radius operating in ultra-wideband, ranging from 3.5 to 16GHz... Read More about High Code Density and Humidity Sensor Chipless RFID Tag.

Development of an affordable and auto-reconfigurable solution for small box assembly (2022)
Presentation / Conference
Wang, Z., Kendall, P., Gumma, K., Smith, A., Turner, A., & Ratchev, S. (2022, June). Development of an affordable and auto-reconfigurable solution for small box assembly. Paper presented at 10th IFAC Conference on Manufacturing Modelling, Management and Control, Nantes, France

The aerospace manufacturing industry has been using dedicated assembly systems with manual processes for decades. Not only is this labour-intensive, it is also extremely wasteful as no reuse is possible at the end of a product life cycle. As automati... Read More about Development of an affordable and auto-reconfigurable solution for small box assembly.

Towards Distributed Cell-less MIMO Testbed: An RFNoC Implementation (2022)
Presentation / Conference
You, M., Chen, T., & Zheng, G. (2022, June). Towards Distributed Cell-less MIMO Testbed: An RFNoC Implementation. Paper presented at 2022 EuCNC & 6G Summit, Grenoble, France & online

In this extended abstract, we will present a novel cell-less multiple-input multiple-output (MIMO) testbed design and an initial implementation based on the design. The key objective is to design a flexible and scalable architecture to facilitate the... Read More about Towards Distributed Cell-less MIMO Testbed: An RFNoC Implementation.

Impact of three different phases of UK Covid-19 lockdown restrictions, Covid infections and Covid vaccination status on runners training distance and pace (2022)
Presentation / Conference
Stocks, J., Bullock, G. S., Feakins, B., Gayer De Mena, L., Tahir, D., Zheng, J., …Kluzek, S. (2022, May). Impact of three different phases of UK Covid-19 lockdown restrictions, Covid infections and Covid vaccination status on runners training distance and pace. Poster presented at BASEM 2022 Conference, Brighton, UK