All Outputs (11)

Modulating the biological function of protein by tailoring the adsorption orientation on nanoparticles (2020)
Journal Article
Jain, A., Trindade, G. F., Hicks, J. M., Potts, J. C., Rahman, R., J. M. Hague, R., …Rawson, F. J. (2021). Modulating the biological function of protein by tailoring the adsorption orientation on nanoparticles. Journal of Colloid and Interface Science, 587, 150-161. https://doi.org/10.1016/j.jcis.2020.12.025

Protein orientation in nanoparticle-protein conjugates plays a crucial role in binding to cell receptors and ultimately, defines their targeting efficiency. Therefore, understanding fundamental aspects of the role of protein orientation upon adsorpti... Read More about Modulating the biological function of protein by tailoring the adsorption orientation on nanoparticles.

Development and Testing of Soft Magnetic Rotor for a Switched Reluctance Motor Built Through Additive Manufacturing Technology (2020)
Conference Proceeding
Gargalis, L., Madonna, V., Giangrande, P., Rocca, R., Ashcroft, I., Hague, R., & Galea, M. (2020). Development and Testing of Soft Magnetic Rotor for a Switched Reluctance Motor Built Through Additive Manufacturing Technology. In 2020 23rd International Conference on Electrical Machines and Systems (ICEMS) (263-268). https://doi.org/10.23919/icems50442.2020.9290893

Additive manufacturing, commonly known as 3D printing, is an emerging technology that is gaining considerable research interest in recent years. In particular, metal printing methodologies might be successfully employed in developing lightweight and... Read More about Development and Testing of Soft Magnetic Rotor for a Switched Reluctance Motor Built Through Additive Manufacturing Technology.

3D Printing as a Technology Enabler for Electrical Machines: Manufacturing and Testing of a Salient Pole Rotor for SRM (2020)
Conference Proceeding
Gargalis, L., Madonna, V., Giangrande, P., Hardy, M., Ashcroft, I., Galea, M., & Hague, R. (2020). 3D Printing as a Technology Enabler for Electrical Machines: Manufacturing and Testing of a Salient Pole Rotor for SRM. In 2020 International Conference on Electrical Machines (ICEM) (12-18). https://doi.org/10.1109/icem49940.2020.9270737

Among the various technology enablers for modern electrical machines, additive manufacturing plays a key role. The advantage of having a precise control of the shape of ferromagnetic structures, whilst achieving good electromagnetic performance, fits... Read More about 3D Printing as a Technology Enabler for Electrical Machines: Manufacturing and Testing of a Salient Pole Rotor for SRM.

Additive Manufacturing and Testing of a Soft Magnetic Rotor for a Switched Reluctance Motor (2020)
Journal Article
Gargalis, L., Madonna, V., Giangrande, P., Rocca, R., Hardy, M., Ashcroft, I., …Hague, R. (2020). Additive Manufacturing and Testing of a Soft Magnetic Rotor for a Switched Reluctance Motor. IEEE Access, 8, 206982-206991. https://doi.org/10.1109/ACCESS.2020.3037190

Additive manufacturing is acknowledged as a key enabling technology, although its adoption is still constrained to niche applications. A promising area for this technology is the production of electrical machines (EMs) and/or their main components (e... Read More about Additive Manufacturing and Testing of a Soft Magnetic Rotor for a Switched Reluctance Motor.

Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices (2020)
Journal Article
Wang, F., Gosling, J. H., Rance, G. A., Trindade, G. F., Makarovsky, O., Cottam, N. D., …Turyanska, L. (2021). Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices. Advanced Functional Materials, 31(5), Article 2007478. https://doi.org/10.1002/adfm.202007478

© 2020 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH 2D materials have unique structural and electronic properties with potential for transformative device applications. However, such devices are usually bespoke structures ma... Read More about Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices.

Recommended Personal Protective Equipment for Cochlear Implant and Other Mastoid Surgery During the COVID-19 Era (2020)
Journal Article
Lawrence, R. J., O'Donoghue, G., Kitterick, P., O'Donoghue, K., Hague, R., Mitchell, L., …Hartley, D. E. (2020). Recommended Personal Protective Equipment for Cochlear Implant and Other Mastoid Surgery During the COVID-19 Era. Laryngoscope, 130(11), 2693-2699. https://doi.org/10.1002/lary.29014

© 2020 American Laryngological, Rhinological and Otological Society Inc, "The Triological Society" and American Laryngological Association (ALA) Objectives/Hypothesis: The overall aim of this study was to evaluate personal protective equipment (PPE)... Read More about Recommended Personal Protective Equipment for Cochlear Implant and Other Mastoid Surgery During the COVID-19 Era.

Modulating the Biological Function of Protein by Tailoring the Adsorption Orientation on Nanoparticles (2020)
Other
Jain, A., Trindade, G., Hicks, J. M., Potts, J. C., Rahman, R., Hague, R., …Rawson, F. Modulating the Biological Function of Protein by Tailoring the Adsorption Orientation on Nanoparticles

Protein orientation in nanoparticle-protein conjugates plays a crucial role in binding to cell receptors and ultimately, defines their targeting efficiency. Therefore, understanding fundamental aspects of the role of protein orientation upon adsorpti... Read More about Modulating the Biological Function of Protein by Tailoring the Adsorption Orientation on Nanoparticles.

Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock (2020)
Journal Article
Aboulkhair, N. T., Zhao, G., Hague, R. J., Kennedy, A. R., Ashcroft, I. A., & Clare, A. T. (2020). Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock. Journal of Manufacturing Processes, 55, 249-253. https://doi.org/10.1016/j.jmapro.2020.04.039

The demonstration of salt dissolution incorporated within laser powder-bed fusion fabrication processes has allowed the creation of complex porous structures without the need for sophisticated design algorithms. This serves to simplify the process, f... Read More about Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock.

The Influence of Iron in Minimizing the Microstructural Anisotropy of Ti-6Al-4V Produced by Laser Powder-Bed Fusion (2020)
Journal Article
Simonelli, M., McCartney, D. G., Barriobero-Vila, P., Aboulkhair, N. T., Tse, Y. Y., Clare, A., & Hague, R. (2020). The Influence of Iron in Minimizing the Microstructural Anisotropy of Ti-6Al-4V Produced by Laser Powder-Bed Fusion. Metallurgical and Materials Transactions A, 51, 2444–2459. https://doi.org/10.1007/s11661-020-05692-6

There remains a significant challenge in adapting alloys for metal based Additive Manufacturing (AM). Adjusting alloy composition to suit the process, particularly under regimes close to industrial practice, is therefore a potential solution. With th... Read More about The Influence of Iron in Minimizing the Microstructural Anisotropy of Ti-6Al-4V Produced by Laser Powder-Bed Fusion.

A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants (2020)
Journal Article
He, Y., Foralosso, R., Ferraz Trindade, G., Ilchev, A., Cantu, L. R., Clark, E., …Wildman, R. D. (2020). A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants. Advanced Therapeutics, 3(6), Article 1900187. https://doi.org/10.1002/adtp.201900187

We propose a strategy for creating tuneable 3D printed drug delivery devices. 3D printing offers the opportunity for improved compliance and patient treatment outcomes through personalisation, but bottlenecks include finding formulations that provide... Read More about A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants.

Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment (2020)
Journal Article
Zou, Z., Simonelli, M., Katrib, J., Dimitrakis, G., & Hague, R. (2020). Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment. Scripta Materialia, 180, 66-70. https://doi.org/10.1016/j.scriptamat.2020.01.027

The coarse prior-? grain structure in titanium alloys produced by additive manufacturing is associated to mechanical anisotropy and limited fatigue life. Here we report a novel methodology to refine such structure by rapid heat treatment of Ti-6Al-4V... Read More about Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment.