All Outputs (12)

A Framework for Optimization of Hybrid Aircraft (2019)
Conference Proceeding
Zhao, X., Sahoo, S., Kyprianidis, K., Sumsurooah, S., Valente, G., Rashed, M., …Ekstedt, E. (2019). A Framework for Optimization of Hybrid Aircraft. In Proceedings of the ASME Turbo Expo : Turbomachinery Technical Conference and Exposition--2019-- : presented at The ASME Turbo Expo 2019 : Turbiomachinery Technical Conference and Exposition, June 17-21, 2019, Phoenix, Arizona, USA. Book 3. https://doi.org/10.1115/GT2019-91335

To achieve the goals of substantial improvements in efficiency and emissions set by Flightpath 2050, fundamentally different concepts are required. As one of the most promising solutions, electrification of the aircraft primary propulsion is currentl... Read More about A Framework for Optimization of Hybrid Aircraft.

Multi-physics Design Optimisation of PM-assisted Synchronous Reluctance Motor for Traction Application (2019)
Conference Proceeding
Al-Ani, M., Walker, A., Vakil, G., Ramanathan, R., Zou, T., La Rocca, S., …McQueen, A. (2019). Multi-physics Design Optimisation of PM-assisted Synchronous Reluctance Motor for Traction Application. In Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (4353-4359). https://doi.org/10.1109/IECON.2019.8926697

Recently, the synchronous reluctance machine limits have been pushed toward meeting the requirements of traction applications. A skilled electromagnetic architecture of a synchronous reluctance machine with the help of permanent magnets can push the... Read More about Multi-physics Design Optimisation of PM-assisted Synchronous Reluctance Motor for Traction Application.

Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions (2019)
Conference Proceeding
Khowja, M. R., Vakil, G., & Gerada, C. (2019). Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions. In Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (922-927). https://doi.org/10.1109/IECON.2019.8927436

This paper presents an analytical tool to generate torque vs speed characteristics of the surface-mounted permanent magnet machines to minimize the computation time and efforts. The paper also derives an expression of d-axis current in the field weak... Read More about Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions.

Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle (2019)
Conference Proceeding
La Rocca, S., La Rocca, A., Walker, A., Vakil, G., Gerada, D., Al-Ani, M., …Paciura, K. (2019). Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle. In Proceedings: 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS) (1-5). https://doi.org/10.1109/ICOECS46375.2019.8949929

Computational Fluid Dynamics (CFD) was used to carry out a fluid flow and thermal investigation of a high power dense traction machine for electric commercial vehicle. One of the features of the machine design considered is the high Length/Diameter (... Read More about Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle.

Trade-off Study of a High Power Density Starter-Generator for Turboprop Aircraft System (2019)
Conference Proceeding
Khowja, M. R., Vakil, G., Gerada, C., Yang, T., Bozhko, S., & Wheeler, P. (2019). Trade-off Study of a High Power Density Starter-Generator for Turboprop Aircraft System. In Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (1435-1440). https://doi.org/10.1109/IECON.2019.8926961

Mechanically-driven actuators, compressors and pumps are being replaced by the aircraft manufacturers that shift the trend towards 'More Electric Aircraft' and hence reducing the mechanical linkages within the aircraft system. This elevates the depen... Read More about Trade-off Study of a High Power Density Starter-Generator for Turboprop Aircraft System.

High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles (2019)
Conference Proceeding
Kumar, R. M. R., Zou, T., La Rocca, A., Vakil, G., Gerada, D., Walker, A., …Fernandes, B. G. (2019). High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles. In IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (1083-1088). https://doi.org/10.1109/IECON.2019.8927523

High power density and high torque density are the fundamental requirements for electric machines used in traction application. The former is obtained by potentially increasing the speed of the machine while the latter by using high energy density ra... Read More about High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles.

Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier (2019)
Conference Proceeding
Kumar, R. M. R., Vakil, G., Gerada, D., Walker, A., La Rocca, S., Al-Ani, M., …Fernandes, B. G. (2019). Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier. In IECON 2019 Proceedings - 45th Annual Conference of the IEEE Industrial Electronics Society (4347-4352). https://doi.org/10.1109/IECON.2019.8926624

Electrical machines with high torque density are required for traction application. Availability of bonded magnets with complex shapes and magnetization pattern can significantly extend the design space of electrical machines. This paper introduces a... Read More about Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier.

Rotor UMP & Mechanical Response in HSPMSM in Typical Running Conditions (2019)
Conference Proceeding
He, Y., Vakil, G., Zhang, X., Gao, P., Gerada, D., & Gerada, C. (2019). Rotor UMP & Mechanical Response in HSPMSM in Typical Running Conditions. In Proceedings: 2019 IEEE Energy Conversion Congress and Exposition (ECCE) (3878-3883). https://doi.org/10.1109/ECCE.2019.8913180

This paper presents a comprehensive analysis on the rotor unbalanced magnetic pull (UMP) and the consequent mechanical response in 6 typical running conditions in a 20000 rpm high speed permanent magnet synchronous motor (HSPMSM) through finite eleme... Read More about Rotor UMP & Mechanical Response in HSPMSM in Typical Running Conditions.

Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator (2019)
Journal Article
He, Y., Xu, M., Xiong, J., Sun, Y., Wang, X., Gerada, D., & Vakil, G. (2019). Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator. IEEE Access, 7, 100813-100823. https://doi.org/10.1109/access.2019.2929868

This paper presents a comprehensive study on the variation laws of electromagnetic torque (EMT) under static air-gap eccentricity (SAGE) conditions in synchronous generators. Different from other studies, this paper focuses on not only the impact of... Read More about Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator.

Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines (2019)
Conference Proceeding
Xie, P., Ramanathan, R., Vakil, G., & Gerada, C. (2019). Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines

This paper proposes a simple analytical machine sizing process for a three-phase surface mounted permanent magnet synchronous machines appropriate for both system level analysis and preliminary machine design. For system-level analysis, the proposed... Read More about Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines.

Sizing, design, and modelling of aerospace electric drive system with long feeder cables (2019)
Conference Proceeding
Xie, P., Vakil, G., & Gerarda, C. (2019). Sizing, design, and modelling of aerospace electric drive system with long feeder cables

The aviation industry is tending towards more electric aircraft, replacing conventionally pneumatic, hydraulic, and mechanical systems with electrical solutions. The electrification of actuators is motivated by increased efficiency, reduced maintenan... Read More about Sizing, design, and modelling of aerospace electric drive system with long feeder cables.

Novel Motor-Shaped Rotational Inductor for Motor Drive Applications (2019)
Journal Article
Odhano, S., Khowja, M. R., Gerada, C., Vakil, G., Abebe, R., Odhano, S. A., …Wheeler, P. (2020). Novel Motor-Shaped Rotational Inductor for Motor Drive Applications. IEEE Transactions on Industrial Electronics, 67(3), 1844-1854. https://doi.org/10.1109/tie.2019.2907512

This paper presents a validation of the novel motor-shaped rotational inductor. To validate the concept, 12 slots 2 poles rotational inductor is tested at different supply frequencies and rotor speeds. Experimental results have shown that the iron lo... Read More about Novel Motor-Shaped Rotational Inductor for Motor Drive Applications.