All Outputs (10)

Effect of nozzle geometry on the gas dynamics and evaporation rates of Suspension High Velocity Oxy Fuel (SHVOF) thermal spray: a numerical investigation (2018)
Journal Article
Chadha, S., Jefferson-Loveday, R., & Hussain, T. (2019). Effect of nozzle geometry on the gas dynamics and evaporation rates of Suspension High Velocity Oxy Fuel (SHVOF) thermal spray: a numerical investigation. Surface and Coatings Technology, 371, 78-89. https://doi.org/10.1016/j.surfcoat.2018.10.085

Thermally sprayed coatings formed from sub-micron or nanoparticles feedstock provide enhanced coating properties and Suspension High Velocity Oxy Fuel (SHVOF) thermal spray is a process that allows the deposition of dense coatings from fine particula... Read More about Effect of nozzle geometry on the gas dynamics and evaporation rates of Suspension High Velocity Oxy Fuel (SHVOF) thermal spray: a numerical investigation.

Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology (2018)
Journal Article
Owoseni, T., Murray, J., Pala, Z., Lester, E., Grant, D., & Hussain, T. (2018). Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology. Surface and Coatings Technology, https://doi.org/10.1016/j.surfcoat.2018.08.047

Suspension high-velocity oxy-fuel (SHVOF) thermal spray is an emerging spray technology that enables the processing of nanometric feedstock. Although SHVOF thermal sprayed alumina coatings prepared from alpha alumina feedstock have been widely report... Read More about Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology.

Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating (2018)
Journal Article
Wang, J., Liu, J., Neate, N. C., Bai, M., Xu, F., Hussain, T., …Hou, X. (2018). Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating. Journal of Alloys and Compounds, 765, https://doi.org/10.1016/j.jallcom.2018.06.239

Hydrophobic metallic coatings have attracted increasing interest in the recent years due to their excellent mechanical durability. But the wetting behavior and hydrophobic mechanism of metallic coatings are far from clear. In this work, Ni-Cu-P terna... Read More about Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating.

Corrosion of cast Stellite-3 analogue in simulated PWR conditions (2018)
Journal Article
Karimi, G., Shipway, P., Stewart, D., & Hussain, T. (2018). Corrosion of cast Stellite-3 analogue in simulated PWR conditions. Corrosion Science, 140, 402-411. https://doi.org/10.1016/j.corsci.2018.05.023

© 2018 Elsevier Ltd Wear resistant alloys are required for deployment in pressurised water reactor primary circuits and in this context, the corrosion behaviour of a cast cobalt-based alloy following exposure for 30 days in lithiated water at 300 °C... Read More about Corrosion of cast Stellite-3 analogue in simulated PWR conditions.

Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution (2018)
Journal Article
Reddy, L., Preston, S. P., Shipway, P., Davis, C., & Hussain, T. (2018). Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution. Surface and Coatings Technology, 349, 198-207. https://doi.org/10.1016/j.surfcoat.2018.05.054

As a candidate coating material for heat-exchanger surfaces in commercial power generation boiler, an amorphous/glass forming Fe-Cr-B alloy NanoSteel SHS 7170 was deposited by a 2 kW fibre laser onto a boiler grade steel substrate (15Mo3). A comprehe... Read More about Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution.

Robust hydrophobic surfaces from suspension HVOF thermal sprayed rare-earth oxide ceramics coatings (2018)
Journal Article
Bai, M., Kazi, H., Zhang, X., Liu, J., & Hussain, T. (2018). Robust hydrophobic surfaces from suspension HVOF thermal sprayed rare-earth oxide ceramics coatings. Nature, 8, Article 6973. https://doi.org/10.1038/s41598-018-25375-y

This study has presented an efficient coating method, namely suspension high velocity oxy-fuel (SHVOF) thermal spraying, to produce large super-hydrophobic ceramic surfaces with a unique micro- and nano-scale hierarchical structures to mimic natural... Read More about Robust hydrophobic surfaces from suspension HVOF thermal sprayed rare-earth oxide ceramics coatings.

Effect of SiO2 dispersion on chlorine-induced high temperature corrosion of HVAF-sprayed NiCrMo coating (2018)
Journal Article
Sadeghimeresht, E., Markocsan, N., Hussain, T., Huhtakangas, M., & Joshi, S. (2018). Effect of SiO2 dispersion on chlorine-induced high temperature corrosion of HVAF-sprayed NiCrMo coating. CORROSION, 74(9), 984-1000. https://doi.org/10.5006/2802

NiCrMo coatings with and without dispersed SiO2 were deposited using high velocity air-fuel (HVAF) technique. Thermogravimetric experiments were conducted in 5% O2+500 vppm HCl+N2 with and without a KCl deposit at 600 °C for up to 168 h. The SiO2-con... Read More about Effect of SiO2 dispersion on chlorine-induced high temperature corrosion of HVAF-sprayed NiCrMo coating.

Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings (2018)
Journal Article
Sadeghimeresht, E., Reddy, L., Hussain, T., Huhtakangas, M., Markocsan, N., & Joshi, S. (2018). Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings. Materials and Design, 148, https://doi.org/10.1016/j.matdes.2018.03.048

The oxidation performance of NiCrAlY and NiCrMo coatings thermally sprayed by high velocity air-fuel (HVAF) technique has been investigated in a chloridizing-oxidizing environment, with and without a KCl deposit, at 600 °C for up to 168 h. Both coati... Read More about Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings.

Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 °C (2018)
Journal Article
Bai, M., Reddy, L., & Hussain, T. (2018). Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 °C. Corrosion Science, 135, https://doi.org/10.1016/j.corsci.2018.02.047

Alumina-forming β-NiAl coatings were deposited by high Velocity Oxy-fuel (HVOF) thermal spray onto 304 stainless steels for protection against chlorine induced corrosion in a biomass-fired boiler. The corrosion test was conducted in a synthetic gas c... Read More about Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 °C.

Microstructure and wear behaviour of powder and suspension hybrid Al2O3–YSZ coatings (2018)
Journal Article
Murray, J. W., Leva, A., Joshi, S., & Hussain, T. (in press). Microstructure and wear behaviour of powder and suspension hybrid Al2O3–YSZ coatings. Ceramics International, https://doi.org/10.1016/j.ceramint.2018.02.048

Suspension based plasma sprayed coatings can yield superior microstructural and tribological properties compared to conventional powder based plasma sprayed coatings. This study investigates a new hybrid method, using simultaneous spraying from powde... Read More about Microstructure and wear behaviour of powder and suspension hybrid Al2O3–YSZ coatings.