Skip to main content

Research Repository

Advanced Search

All Outputs (7)

Resolution enhancement for topography measurement of high-dynamic-range surfaces via image fusion (2018)
Journal Article
Wang, J., Su, R., Leach, R., Lu, W., Zhou, L., & Jiang, X. (2018). Resolution enhancement for topography measurement of high-dynamic-range surfaces via image fusion. Optics Express, 26(26), 34805-34819. https://doi.org/10.1364/OE.26.034805

In this paper, we introduce a method and algorithm for resolution enhancement of low-resolution surface topography data by fusing it with corresponding high-resolution intensity images. This fusion is carried out by linking the three-dimensional topo... Read More about Resolution enhancement for topography measurement of high-dynamic-range surfaces via image fusion.

Mid-infrared Fourier-domain optical coherence tomography with a pyroelectric linear array (2018)
Journal Article
Zorin, I., Su, R., Prylepa, A., Kilgus, J., Brandstetter, M., & Heise, B. (2018). Mid-infrared Fourier-domain optical coherence tomography with a pyroelectric linear array. Optics Express, 26(25), 33428-33439. https://doi.org/10.1364/oe.26.033428

Optical technology in the mid-infrared wavelength range is currently a rapidly developing field initiated by the availability of novel high-power and spatially coherent sources. Non-destructive testing techniques based on these sources are very promi... Read More about Mid-infrared Fourier-domain optical coherence tomography with a pyroelectric linear array.

Imaging beyond the fundamental slope limit in surface metrology using fluorophore-aided scattering microscopy (2018)
Presentation / Conference
Liu, J., Liu, C., Li, L., Su, R., & Leach, R. (2018, November). Imaging beyond the fundamental slope limit in surface metrology using fluorophore-aided scattering microscopy. Paper presented at Special Interest Group Meeting: Structured & Freeform Surfaces

Topography measurement for smooth surfaces with high slopes, e.g. freeform optics, is a challenging task for optical measuring instruments as the light reflected by the tilted surface cannot be sufficiently collected by the objective, resulting in lo... Read More about Imaging beyond the fundamental slope limit in surface metrology using fluorophore-aided scattering microscopy.

Crystallographic texture can be rapidly determined by electrochemical surface analytics (2018)
Journal Article
Speidel, A., Su, R., Mitchell-Smith, J., Dryburgh, P., Bisterov, I., Pieris, D., …Clare, A. T. (2018). Crystallographic texture can be rapidly determined by electrochemical surface analytics. Acta Materialia, 159, 89-101. https://doi.org/10.1016/j.actamat.2018.07.059

Orientation affects application-defining properties of crystalline materials. Hence, information in this regard is highly-prized. We show that electrochemical jet processing (EJP), when coupled with accurate metrological appraisal, can characterise c... Read More about Crystallographic texture can be rapidly determined by electrochemical surface analytics.

Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing (2018)
Journal Article
Feng, X., Su, R., Happonen, T., Liu, J., & Leach, R. (2018). Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing. Optics Express, 26(11), https://doi.org/10.1364/OE.26.013927

This paper presents an all-optical difference engine (AODE) sensor for detecting the defects in printed electronics produced with roll-to-roll processes. The sensor is based on the principle of coherent optical subtraction and is able to achieve high... Read More about Fast and cost-effective in-process defect inspection for printed electronics based on coherent optical processing.

Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement (2018)
Journal Article
Leach, R., Sims-Waterhouse, D., Medeossi, F., Savio, E., Carmignato, S., & Su, R. (2018). Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement. CIRP Annals - Manufacturing Technology, 67(1), 599-602. https://doi.org/10.1016/j.cirp.2018.04.043

Multisensor data fusion is an approach to enlarge the potential applicability of measuring techniques and improve accuracy, taking advantage of the strengths of different techniques. In this work, we present a new method for the fusion of photogramme... Read More about Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement.