All Outputs (3)

Microstructural characterisation of Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%) alloy powder produced by gas atomisation (2018)
Journal Article
Carrington, M., Daure, J., Ratia, V., Shipway, P., McCartney, D., & Stewart, D. (2019). Microstructural characterisation of Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%) alloy powder produced by gas atomisation. Materials and Design, 164, Article 107548. https://doi.org/10.1016/j.matdes.2018.107548

Nitrogen gas atomised powders of the hardfacing alloy Tristelle 5183 (Fe-21%Cr-10%Ni-7%Nb-5%Si-2%C in wt%) were sieved into different particle size ranges and their microstructures have been investigated. Powder particles larger than approximately 53... Read More about Microstructural characterisation of Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%) alloy powder produced by gas atomisation.

The effect of temperature on sliding wear of self-mated HIPed Stellite 6 in a simulated PWR water environment (2018)
Journal Article
Ratia, V., Zhang, D., Carrington, M., Daure, J., McCartney, D., Shipway, P., & Stewart, D. (2019). The effect of temperature on sliding wear of self-mated HIPed Stellite 6 in a simulated PWR water environment. Wear, 420-421, 215-225. https://doi.org/10.1016/j.wear.2018.09.012

Cobalt-based Stellite alloys are widely used in the primary circuit of pressurized water reactors (PWR) to protect valve surfaces against wear and galling in a corrosive environment. In this study, self-mated sliding wear of HIP-consolidated (Hot Iso... Read More about The effect of temperature on sliding wear of self-mated HIPed Stellite 6 in a simulated PWR water environment.

A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films (2018)
Journal Article
Daure, J., Carrington, M., Shipway, P., McCartney, D., & Stewart, D. (in press). A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films. Surface and Coatings Technology, https://doi.org/10.1016/j.surfcoat.2018.06.070

Electroplated hard chromium (EPHC) is used in many industries as a wear and corrosion resistant coating. However, the long term viability of the electroplating process is at risk due to legislation regarding the toxic chemicals used. The physical vap... Read More about A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films.