Skip to main content

Research Repository

Advanced Search

All Outputs (8)

Removal of copper from cattle footbath wastewater with layered double hydroxide adsorbents as a route to antimicrobial resistance mitigation on dairy farms (2018)
Journal Article
Williams, O., Clark, I., Gomes, R. L., Perehinec, T., Hobman, J. L., Stekel, D. J., …Lester, E. (2019). Removal of copper from cattle footbath wastewater with layered double hydroxide adsorbents as a route to antimicrobial resistance mitigation on dairy farms. Science of the Total Environment, 655, 1139-1149. https://doi.org/10.1016/j.scitotenv.2018.11.330

Copper and zinc are routinely used in livestock antimicrobial footbaths in commercial farming. The footbath mix is a cost to farmers, and the disposal of spent footbath into slurry tanks leads to soil contamination, as well as the potential for antim... Read More about Removal of copper from cattle footbath wastewater with layered double hydroxide adsorbents as a route to antimicrobial resistance mitigation on dairy farms.

Development a modified crossing point temperature (CPTHR) method to assess spontaneous combustion propensity of coal and its chemo-metric analysis (2018)
Journal Article
Mohalik, N., Lester, E., & Lowndes, I. (2018). Development a modified crossing point temperature (CPTHR) method to assess spontaneous combustion propensity of coal and its chemo-metric analysis. Journal of Loss Prevention in the Process Industries, 56, 359-369. https://doi.org/10.1016/j.jlp.2018.09.00

Spontaneous combustion of Indian coals was investigated using spontaneous combustion rig at University of Nottingham, UK to assess their susceptibility. In the present study authors have used eleven coal samples collected from the Jharia coalfield (J... Read More about Development a modified crossing point temperature (CPTHR) method to assess spontaneous combustion propensity of coal and its chemo-metric analysis.

High efficiency synthesis of HKUST-1 under mild conditions with high BET surface area and CO2 uptake capacity (2018)
Journal Article
Chen, Y., Mu, X., Lester, E., & Wu, T. (2018). High efficiency synthesis of HKUST-1 under mild conditions with high BET surface area and CO2 uptake capacity. Progress in Natural Science, https://doi.org/10.1016/j.pnsc.2018.08.002

This study focuses on the development of a hydrothermal method for the rapid synthesis of good quality copper benzene-1,3,5-tricarboxylate (referred to as HKUST-1) with high yield under mild preparation conditions to address the issues associated wit... Read More about High efficiency synthesis of HKUST-1 under mild conditions with high BET surface area and CO2 uptake capacity.

Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology (2018)
Journal Article
Owoseni, T., Murray, J., Pala, Z., Lester, E., Grant, D., & Hussain, T. (2018). Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology. Surface and Coatings Technology, https://doi.org/10.1016/j.surfcoat.2018.08.047

Suspension high-velocity oxy-fuel (SHVOF) thermal spray is an emerging spray technology that enables the processing of nanometric feedstock. Although SHVOF thermal sprayed alumina coatings prepared from alpha alumina feedstock have been widely report... Read More about Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology.

Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications (2018)
Journal Article
Williams, O., Taylor, S., Lester, E., Kingman, S., Giddings, D., & Eastwick, C. (2018). Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications. Materials, 11(8), https://doi.org/10.3390/ma11081329

In this paper, the applicability of mechanical tests for biomass pellet characterisation was investigated. Pellet durability, quasi-static (low strain rate), and dynamic (high strain rate) mechanical tests were applied to mixed wood, eucalyptus, sunf... Read More about Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications.

A proposed biomass char classification system (2018)
Journal Article
Lester, E., Avila, C., Pang, C. H., Williams, O., Perkins, J., Gaddipatti⁠, S., …Wu, T. (2018). A proposed biomass char classification system. Fuel, 232, https://doi.org/10.1016/j.fuel.2018.05.153

A new classification system is proposed for the morphological characterisation of char structures from biomass. These char structures are unlike the coal chars that have an established nomenclature via the International Committee of Coal and Organic... Read More about A proposed biomass char classification system.

A review of the environmental impact of nanomaterial synthesis using continuous flow hydrothermal synthesis (2018)
Journal Article
Caramazana, P., Dunne, P., Gimeno-Fabra, M., McKechnie, J., & Lester, E. (2018). A review of the environmental impact of nanomaterial synthesis using continuous flow hydrothermal synthesis. Current Opinion in Green and Sustainable Chemistry, 12, 57-62. https://doi.org/10.1016/j.cogsc.2018.06.016

Continuous flow hydrothermal synthesis (CFHS) is an emerging process technology for the manufacture of nanomaterials. Recent work has been undertaken to establish the green ‘credentials’ of CFHS amongst alternative techniques for nanosynthesis. In th... Read More about A review of the environmental impact of nanomaterial synthesis using continuous flow hydrothermal synthesis.

A techno-economic assessment of the potential for combining supercritical water oxidation with ‘in-situ’ hydrothermal synthesis of nanocatalysts using a counter current mixing reactor (2018)
Journal Article
Al-Atta, A., Huddle, T., Rodríguez, Y. G., Mato, F., García-Serna, J., Cocero, M. J., …Lester, E. (2018). A techno-economic assessment of the potential for combining supercritical water oxidation with ‘in-situ’ hydrothermal synthesis of nanocatalysts using a counter current mixing reactor. Chemical Engineering Journal, 344, 431-440. https://doi.org/10.1016/j.cej.2018.03.058

A combined process of supercritical water oxidation (SCWO) and supercritical water hydrothermal synthesis (SCWHS) in a continuous counter current reactor is reported. Acrylic acid was used as a model unsaturated carboxylic acid compound and the effec... Read More about A techno-economic assessment of the potential for combining supercritical water oxidation with ‘in-situ’ hydrothermal synthesis of nanocatalysts using a counter current mixing reactor.