All Outputs (6)

Synthesis of methacrylate-terminated block copolymers with reduced transesterification by controlled ring-opening polymerization (2018)
Journal Article
Ruiz-Cantu, L. A., Pearce, A. K., Burroughs, L., Bennett, T. M., Vasey, C. E., Wildman, R., …Taresco, V. (2019). Synthesis of methacrylate-terminated block copolymers with reduced transesterification by controlled ring-opening polymerization. Macromolecular Chemistry and Physics, 220(2), Article 1800459. https://doi.org/10.1002/macp.201800459

This work presents a robust method to achieve the synthesis of low molecular weight polyesters 26 via ring-opening polymerization (ROP) initiated by 2-hydroxyethyl-methacrylate (HEMA) 27 when using triazabicyclodecene (TBD) as catalyst. The effect th... Read More about Synthesis of methacrylate-terminated block copolymers with reduced transesterification by controlled ring-opening polymerization.

Extrusion 3D printing of paracetamol tablets from a single formulation with tunable release profiles through control of tablet geometry (2018)
Journal Article
Khaled, S. A., Alexander, M. R., Irvine, D. J., Wildman, R. D., Wallace, M. J., Sharpe, S., …Roberts, C. J. (2018). Extrusion 3D printing of paracetamol tablets from a single formulation with tunable release profiles through control of tablet geometry. AAPS PharmSciTech, 19(8), 3403–3413. https://doi.org/10.1208/s12249-018-1107-z

An extrusion based 3D printer was used to fabricate paracetamol tablets with different geometries (mesh, ring, and solid) from a single paste-based formulation formed from standard pharmaceutical ingredients. The tablets demonstrate that tunable drug... Read More about Extrusion 3D printing of paracetamol tablets from a single formulation with tunable release profiles through control of tablet geometry.

Synthesis and control of crosslinked poly(acrylic acid) based viscosity modifiers using dense phase carbon dioxide as a solvent (2018)
Journal Article
Alexander, W., Wickson, J., Duncan, J., Carmichael, K., Irvine, D., & Howdle, S. (2018). Synthesis and control of crosslinked poly(acrylic acid) based viscosity modifiers using dense phase carbon dioxide as a solvent. Journal of Supercritical Fluids, 139, 38-44. https://doi.org/10.1016/j.supflu.2018.05.003

We investigate the clean synthesis of a cross-linked poly(acrylic acid) viscosity modifier using supercritical CO2 to replace more hazardous volatile organic solvents that are typically used for this process. The polymers were analysed by aqueous swe... Read More about Synthesis and control of crosslinked poly(acrylic acid) based viscosity modifiers using dense phase carbon dioxide as a solvent.

Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2018)
Journal Article
Hu, Q., Sun, X., Parmenter, C. D. J., Fay, M. W., Smith, E. F., Rance, G. A., …Wildman, R. (2018). Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 8(1), Article 3512. https://doi.org/10.1038/s41598-018-21513-8

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery (2018)
Journal Article
Louzao, I., Koch, B., Taresco, V., Ruiz Cantu, L., Irvine, D. J., Roberts, C. J., …Alexander, M. R. (in press). Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery. ACS Applied Materials and Interfaces, 10(8), https://doi.org/10.1021/acsami.7b15677

A robust discovery methodology is presented to identify novel biomaterials suitable for 3D printing. Currently the application of Additive Manufacturing is limited by the availability of functional inks, especially in the area of biomaterials-this me... Read More about Identification of novel ‘inks’ for 3D printing using high throughput screening: bioresorbable photocurable polymers for controlled drug delivery.

Prediction of Broad-Spectrum Pathogen Attachment to Coating Materials for Biomedical Devices (2018)
Journal Article
Dundas, A. A., Mikulskis, P., Hook, A., Dundas, A., Irvine, D., Sanni, O., …Winkler, D. A. (2018). Prediction of Broad-Spectrum Pathogen Attachment to Coating Materials for Biomedical Devices. ACS Applied Materials and Interfaces, 10(1), 139-149. https://doi.org/10.1021/acsami.7b14197

© 2017 American Chemical Society. Bacterial infections in healthcare settings are a frequent accompaniment to both routine procedures such as catheterization and surgical site interventions. Their impact is becoming even more marked as the numbers of... Read More about Prediction of Broad-Spectrum Pathogen Attachment to Coating Materials for Biomedical Devices.