Skip to main content

Research Repository

Advanced Search

All Outputs (13)

Development of mathematically-defined surfaces (2017)
Conference Proceeding
Todhunter, L. D., Leach, R., Lawes, S., Harris, P., & Blateyron, F. (2017). Development of mathematically-defined surfaces.

New software has been developed that enables the creation of areal surface topography representations. The goal of this software package is to utilise the mathematically-defined surface representations in the development of surface texture parameter... Read More about Development of mathematically-defined surfaces.

True-color 3D surface metrology for additive manufacturing using interference microscopy (2017)
Conference Proceeding
DiSciacca, J., Gomez, C., Thompson, A., Lawes, S., Leach, R., Colonna de Lega, X., & de Groot, P. (2017). True-color 3D surface metrology for additive manufacturing using interference microscopy.

Coherence scanning interferometry (CSI) is widely used for surface topography characterisation. With the ability to measure both rough surfaces with the high slopes and optical finishes, CSI has made contibutions in fields from industrial machining t... Read More about True-color 3D surface metrology for additive manufacturing using interference microscopy.

Optimisation of surface topography characterisation for metal additive manufacturing using coherence scanning interferometry (2017)
Conference Proceeding
Gómez, C. A., Su, R., Thompson, A., DiSciacca, J., Lawes, S., & Leach, R. K. (2017). Optimisation of surface topography characterisation for metal additive manufacturing using coherence scanning interferometry.

The surface topography of metal additive manufactured (AM) parts can be challenging to measure due to the presence of complex features, such as high slopes, step like recesses and protuberances, and local variations in reflectance. Recent innovations... Read More about Optimisation of surface topography characterisation for metal additive manufacturing using coherence scanning interferometry.

A microscopy approach for in situ inspection of the ?CMM stylus for contamination (2017)
Journal Article
Feng, X., Pascal, J., & Lawes, S. (in press). A microscopy approach for in situ inspection of the ?CMM stylus for contamination. Measurement Science and Technology, 28(9), https://doi.org/10.1088/1361-6501/aa7c93

During the µCMM measurement process, contamination gradually builds up on the surface of the stylus tip and affects dimensional accuracy of the measurement. Regular inspection of the stylus for contamination is essential in determining the appropriat... Read More about A microscopy approach for in situ inspection of the ?CMM stylus for contamination.

Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry (2017)
Journal Article
Gomez, C., Su, R., Thompson, A., DiSciacca, J., Lawes, S., & Leach, R. K. (2017). Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry. Optical Engineering, 56(11), 1-8. https://doi.org/10.1117/1.OE.56.11.111714

Surface topography measurement for metal additive manufacturing (AM) is a challenging task for contact and non-contact methods. In this paper, we present an experimental investigation of the use of coherence scanning interferometry (CSI) for measurem... Read More about Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry.

Industrial survey of ISO surface texture parameters (2017)
Journal Article
Todhunter, L. D., Leach, R., Lawes, S., & Blateyron, F. (2017). Industrial survey of ISO surface texture parameters. CIRP Journal of Manufacturing Science and Technology, 19, https://doi.org/10.1016/j.cirpj.2017.06.001

Results of an international survey are presented, detailing the use of surface texture parameters in industry. The survey received 179 responses from a total of 34 countries, revealing the use of a variety of parameters from ISO 4287, ISO 12085, ISO... Read More about Industrial survey of ISO surface texture parameters.

Results of an industrial survey on the use of surface texture parameters (2017)
Conference Proceeding
Todhunter, L. D., Leach, R., & Lawes, S. (2017). Results of an industrial survey on the use of surface texture parameters.

In 1999, CIRP conducted an industrial survey of the use of surface texture parameters [1]. In the seventeen years since, much has changed, with the most important advancement being the introduction of areal surface texture parameters as described in... Read More about Results of an industrial survey on the use of surface texture parameters.

Coherence scanning interferometry for additive manufacture (2017)
Conference Proceeding
Gomez, C., Thompson, A., DiSciacca, J., Lawes, S., & Leach, R. (2017). Coherence scanning interferometry for additive manufacture.

Additive manufacture (AM) of metal components is a rapidly maturing technology; but given the large number of interrelated process parameters, it remains difficult to control to high precision. It has been observed that processing conditions may be a... Read More about Coherence scanning interferometry for additive manufacture.

X-ray computed tomography of additively manufactured metal parts: the effect of magnification and reconstruction sampling on surface topography measurement (2017)
Conference Proceeding
Thompson, A., Körner, L., Senin, N., Lawes, S., Leach, R., & Maskery, I. (2017). X-ray computed tomography of additively manufactured metal parts: the effect of magnification and reconstruction sampling on surface topography measurement.

X-ray computed tomography (XCT) has recently become recognised as a viable method of surface topography measurement for additively manufactured (AM) metal parts [1–5]. AM is capable of producing internal features that are inaccessible to other surfac... Read More about X-ray computed tomography of additively manufactured metal parts: the effect of magnification and reconstruction sampling on surface topography measurement.

An industrial survey on the use of surface texture parameters (2017)
Conference Proceeding
Todhunter, L. D., Leach, R., & Lawes, S. D. (2017). An industrial survey on the use of surface texture parameters.

In 1999, CIRP conducted an industrial survey of the use of surface texture parameters [1]. In the seventeen years since, much has changed, with the most important advancement being the introduction of areal surface texture parameters as described in... Read More about An industrial survey on the use of surface texture parameters.

An analysis of type F2 software measurement standards for profile surface texture parameters (2017)
Journal Article
Todhunter, L. D., Leach, R. K., Lawes, S., & Blateyron, F. (2017). An analysis of type F2 software measurement standards for profile surface texture parameters. Measurement Science and Technology, 28(6), Article 065017. https://doi.org/10.1088/1361-6501/aa6924

This paper reports on an in-depth analysis of ISO 5436 part 2 type F2 reference software for the calculation of profile surface texture parameters that has been performed on the input, implementation and output results of the reference software devel... Read More about An analysis of type F2 software measurement standards for profile surface texture parameters.

Measurement of internal surfaces of additively manufactured parts by X-ray computed tomography (2017)
Conference Proceeding
Thompson, A., Körner, L., Senin, N., Lawes, S., Maskery, I., & Leach, R. K. (2017). Measurement of internal surfaces of additively manufactured parts by X-ray computed tomography.

Recent advances in X-ray computed tomography (XCT) have allowed for measurement resolutions approaching the point where XCT can be used for measuring surface topography. These advances make XCT appealing for measuring hard-to-reach or internal surfac... Read More about Measurement of internal surfaces of additively manufactured parts by X-ray computed tomography.