All Outputs (10)

Electromagnetic heating for industrial kilning of malt: a feasibility study (2016)
Journal Article
Ferrari-John, R., Katrib, J., Zerva, E., Davies, N., Cook, D. J., Dodds, C., & Kingman, S. (in press). Electromagnetic heating for industrial kilning of malt: a feasibility study. Food and Bioprocess Technology, https://doi.org/10.1007/s11947-016-1849-0

Industrial malting operations use ~800kWh/t of energy to produce the heat required to kiln malt. Electromagnetic heating technologies are suggested as a way to potentially improve the energy efficiency of the kilning processing. In this work, the pot... Read More about Electromagnetic heating for industrial kilning of malt: a feasibility study.

Influence of mill type on densified biomass comminution (2016)
Journal Article
Williams, O., Newbolt, G., Eastwick, C., Kingman, S. W., Giddings, D., Lormor, S., & Lester, E. (2016). Influence of mill type on densified biomass comminution. Applied Energy, 182, 219-231. https://doi.org/10.1016/j.apenergy.2016.08.111

The impact of different mill fracture mechanisms were examined for a wide range of densified biomass pellets to provide a comprehensive analysis of biomass milling behaviour for pulverised fuel combustion. The milling behaviour of 7 woody, herbaceous... Read More about Influence of mill type on densified biomass comminution.

Understanding selectivity in radio frequency and microwave sorting of porphyry copper ores (2016)
Journal Article
Ferrari-John, R., Batchelor, A., Katrib, J., Dodds, C., & Kingman, S. (in press). Understanding selectivity in radio frequency and microwave sorting of porphyry copper ores. International Journal of Mineral Processing, 155, https://doi.org/10.1016/j.minpro.2016.08.011

Continuous high-throughput microwave treatment followed by infrared thermal imaging (MW-IR) has previously been shown to provide attractive separations for a number of porphyry copper ores, leading to rejection of a large proportion of barren fragmen... Read More about Understanding selectivity in radio frequency and microwave sorting of porphyry copper ores.

Pilot scale microwave sorting of porphyry copper ores: Part 2 – Pilot plant trials (2016)
Journal Article
Batchelor, A., Ferrari-John, R., Dodds, C., & Kingman, S. (2016). Pilot scale microwave sorting of porphyry copper ores: Part 2 – Pilot plant trials. Minerals Engineering, 98, 328-338. https://doi.org/10.1016/j.mineng.2016.07.009

An experimental pilot plant was constructed, commissioned and operated at a major porphyry copper mine to understand the challenges of microwave infrared thermal (MW-IRT) sorting at scale and to compare batch laboratory performance with pilot-scale c... Read More about Pilot scale microwave sorting of porphyry copper ores: Part 2 – Pilot plant trials.

Pilot scale microwave sorting of porphyry copper ores: Part 1 – Laboratory investigations (2016)
Journal Article
Batchelor, A., Ferrari-John, R., Katrib, J., Udoudo, O., Jones, D., Dodds, C., & Kingman, S. (2016). Pilot scale microwave sorting of porphyry copper ores: Part 1 – Laboratory investigations. Minerals Engineering, 98, 303-327. https://doi.org/10.1016/j.mineng.2016.07.007

Microwave treatment followed by infrared thermal imaging (MW–IRT) has been proposed as a potential excitation-discrimination technique to facilitate sorting of porphyry copper ores. A continuous, high throughput (up to 100t/h), belt–based microwave c... Read More about Pilot scale microwave sorting of porphyry copper ores: Part 1 – Laboratory investigations.

A tool for predicting heating uniformity in industrial radio frequency processing (2016)
Journal Article
Ferrari-John, R., Katrib, J., Palade, P., Batchelor, A., Dodds, C., & Kingman, S. (in press). A tool for predicting heating uniformity in industrial radio frequency processing. Food and Bioprocess Technology, https://doi.org/10.1007/s11947-016-1762-6

Radio frequency energy is utilised for heating in a wide range of applications, particularly in the food industry. A major challenge of RF processing is non-uniform heating in loads of variable and angular geometry, leading to reduced quality and pro... Read More about A tool for predicting heating uniformity in industrial radio frequency processing.

Increasing the grind size for effective liberation and flotation of a porphyry copper ore by microwave treatment (2016)
Journal Article
Batchelor, A., Jones, D., Plint, S., & Kingman, S. (2016). Increasing the grind size for effective liberation and flotation of a porphyry copper ore by microwave treatment. Minerals Engineering, 94, https://doi.org/10.1016/j.mineng.2016.05.011

In this paper, mineralogy, grain size, dissemination, textural consistency and mineral associations were determined for a commercially exploited porphyry copper ore using a Mineral Liberation Analyser (MLA). The ore was subjected to high power densit... Read More about Increasing the grind size for effective liberation and flotation of a porphyry copper ore by microwave treatment.

High-resolution dielectric characterization of minerals: a step towards understanding the basic interactions between microwaves and rocks (2016)
Journal Article
Monti, T., Tselev, A., Ofonime, U., Ivanov, I. N., Dodds, C., & Kingman, S. (2016). High-resolution dielectric characterization of minerals: a step towards understanding the basic interactions between microwaves and rocks. International Journal of Mineral Processing, 151, https://doi.org/10.1016/j.minpro.2016.04.003

Microwave energy was demonstrated to be potentially beneficial for reducing the cost of several steps of the mining process. Significant literature was developed about this topic but few studies are focused on understanding the interaction between mi... Read More about High-resolution dielectric characterization of minerals: a step towards understanding the basic interactions between microwaves and rocks.

Characterisation of potato crisp effective porosity using micro-CT (2016)
Journal Article
Renshaw, R. C., Robinson, J. P., Dimitrakis, G., Bows, J. R., & Kingman, S. W. (2016). Characterisation of potato crisp effective porosity using micro-CT. Journal of the Science of Food and Agriculture, 96(13), 4440-4448. https://doi.org/10.1002/jsfa.7655

Background The effective porosity is an important quantitative parameter for food products that has a significant effect on taste and quality. It is challenging to quantify the apparent porosity of fried potato crisps as they have a thin irregular... Read More about Characterisation of potato crisp effective porosity using micro-CT.

Understanding the electromagnetic interaction of metal organic framework reactants in aqueous solution at microwave frequencies (2016)
Journal Article
Laybourn, A., Katrib, J., Palade, P. A., Easun, T. L., Champness, N. R., Schröder, M., & Kingman, S. W. (2016). Understanding the electromagnetic interaction of metal organic framework reactants in aqueous solution at microwave frequencies. Physical Chemistry Chemical Physics, 18(7), https://doi.org/10.1039/C5CP05426E

Preparation of metal organic frameworks (MOFs) via microwave heating is becoming increasingly popular due to reduced reaction times and enhanced control of MOF particle size. However, there is little understanding about the detailed interaction of th... Read More about Understanding the electromagnetic interaction of metal organic framework reactants in aqueous solution at microwave frequencies.