Skip to main content

Research Repository

Advanced Search

All Outputs (4)

Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture (2016)
Journal Article
Hirsch, M., Patel, R., Li, W., Guan, G., Leach, R. K., Sharples, S. D., & Clare, A. T. (2017). Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture. Additive Manufacturing, 13, 135-142. https://doi.org/10.1016/j.addma.2016.10.004

Unlike more established subtractive or constant volume manufacturing technologies, additive manufacturing methods suffer from a lack of in-situ monitoring methodologies which can provide informationrelating to process performance and the formation of... Read More about Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture.

Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography (2016)
Journal Article
Guan, G., Hirsch, M., Syam, W. P., Leach, R. K., Huang, Z., & Clare, A. T. (2016). Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472(2191), Article 20160201. https://doi.org/10.1098/rspa.2016.0201

Defects produced during selective laser sintering (SLS) are difficult to non-destructively detect after build completion without the use of X-ray-based methods. Overcoming this issue by assessing integrity on a layer-by-layer basis has become an area... Read More about Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography.

Spatially resolved acoustic spectroscopy for selective laser melting (2016)
Journal Article
Smith, R. J., Hirsch, M., Patel, R., Li, W., Clare, A. T., & Sharples, S. D. (2016). Spatially resolved acoustic spectroscopy for selective laser melting. Journal of Materials Processing Technology, 236, 93-102. https://doi.org/10.1016/j.jmatprotec.2016.05.005

Additive manufacturing (AM) is a manufacturing technique that typically builds parts layer by layer, for example, in the case of selective laser melted (SLM) material by fusing layers of metal powder. This allows the construction of complex geometry... Read More about Spatially resolved acoustic spectroscopy for selective laser melting.

Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing (2016)
Journal Article
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016). Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Materials and Design, 95, 431-445. https://doi.org/10.1016/j.matdes.2016.01.099

Lack of assurance of quality with additively manufactured (AM) parts is a key technological barrier that prevents manufacturers from adopting AM technologies, especially for high-value applications where component failure cannot be tolerated. Develop... Read More about Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing.