All Outputs (6)

Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications (2016)
Journal Article
Qian, L., Xu, F., Voisey, K., Nekouie, V., Zhou, Z., Silberschmidt, V. V., & Hou, X. (2017). Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications. Surface and Coatings Technology, 311, https://doi.org/10.1016/j.surfcoat.2016.12.106

ZrO2 nano-particles were incorporated into electro-deposited PtAl coatings in an attempt to enhance their performance by exploiting the effect of reactive element oxides. PtAl coatings with and without ZrO2 particles were deposited onto three commerc... Read More about Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications.

Evaluation of inulin and aloe vera as green corrosion inhibitors for mild steel in 15% HCl (2016)
Conference Proceeding
Ajayi, O., Everitt, N., & Voisey, K. (2016). Evaluation of inulin and aloe vera as green corrosion inhibitors for mild steel in 15% HCl.

REACH legislation and PARCOM recommendations are driving research in environmental friendly alternatives to the highly toxic compounds currently used as corrosion inhibitors. Here two candidate plant extract green corrosion inhibitors are evaluated b... Read More about Evaluation of inulin and aloe vera as green corrosion inhibitors for mild steel in 15% HCl.

Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: microstructure and high temperature oxidation (2016)
Journal Article
Song, B., Pala, Z., Voisey, K., & Hussain, T. (in press). Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: microstructure and high temperature oxidation. Surface and Coatings Technology, https://doi.org/10.1016/j.surfcoat.2016.07.046

Ni50Cr thermally sprayed coatings are widely used for high temperature oxidation and corrosion in thermal power plants. In this study, a commercially available gas atomised Ni50Cr powder was sprayed onto a power plant alloy (ASME P92) using both gas... Read More about Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: microstructure and high temperature oxidation.

Modelling and experimental study on ?-phase depletion behaviour of HVOF sprayed free-standing CoNiCrAlY coatings during oxidation (2016)
Journal Article
Chen, H., Jackson, G., Voisey, K., & McCartney, D. (2016). Modelling and experimental study on ?-phase depletion behaviour of HVOF sprayed free-standing CoNiCrAlY coatings during oxidation. Surface and Coatings Technology, 291, 34-42. https://doi.org/10.1016/j.surfcoat.2016.02.008

This paper investigates the β-phase depletion behaviour during oxidation of free-standing CoNiCrA1Y (Co-31.7%Ni-20.8%Cr-8.1%A1-0.5%Y, all in wt%) bond coats prepared by high velocity oxy-fuel (HVOF) thermal spraying. The microstructure of the coating... Read More about Modelling and experimental study on ?-phase depletion behaviour of HVOF sprayed free-standing CoNiCrAlY coatings during oxidation.

Effects of pre-cracking on small punch creep testing of a vacuum plasma-sprayed CoNiCrAlY coating (2016)
Journal Article
Chen, H., Hyde, T., Voisey, K., & McCartney, D. (2018). Effects of pre-cracking on small punch creep testing of a vacuum plasma-sprayed CoNiCrAlY coating. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(3), 242-249. doi:10.1177/1464420715622495

This paper presents the results of small punch creep testing (SPCT) of a vacuum plasma-sprayed (VPS) CoNiCrAlY coating (Co – 31.7%, Ni – 20.8%, Cr – 8.1%, Al – 0.5%, Y, all in wt%) carried out at 750 grad. C. Coating cross-sections, after initial hea... Read More about Effects of pre-cracking on small punch creep testing of a vacuum plasma-sprayed CoNiCrAlY coating.

Laser cladding of Ni50Cr: A parametric and dilution study (2016)
Conference Proceeding
Song, B., Hussain, T., & Voisey, K. T. (2016). Laser cladding of Ni50Cr: A parametric and dilution study. . https://doi.org/10.1016/j.phpro.2016.08.072

© 2016 The Authors. The increasing use of biomass as a fuel is leading to higher fireside corrosion of the heat exchangers in boilers due to the high chlorine and alkali metal content in the fuel. Laser cladding of Ni50Cr is a promising technique to... Read More about Laser cladding of Ni50Cr: A parametric and dilution study.