Skip to main content

Research Repository

Advanced Search

All Outputs (10)

Coking and deactivation of a mesoporous Ni-CaO-ZrO2 catalyst in dry reforming of methane: a study under different feeding compositions (2014)
Journal Article
Wang, C., Sun, N., Zhao, N., Wei, W., Sun, Y., Sun, C., …Snape, C. (2015). Coking and deactivation of a mesoporous Ni-CaO-ZrO2 catalyst in dry reforming of methane: a study under different feeding compositions. Fuel, 143, 527-535. https://doi.org/10.1016/j.fuel.2014.11.097

A previously developed mesoporous Ni–CaO–ZrO2 catalyst (NCZ) was submitted to dry reforming of methane (DRM), and the influence of feeding compositions on the properties of accumulated carbon was comprehensively studied. To this end, the used catalys... Read More about Coking and deactivation of a mesoporous Ni-CaO-ZrO2 catalyst in dry reforming of methane: a study under different feeding compositions.

High pressure water pyrolysis of coal to evaluate the role of pressure on hydrocarbon generation and source rock maturation at high maturities under geological conditions (2014)
Journal Article
Uguna, C. N., Carr, A. D., Snape, C. E., & Meredith, W. (2015). High pressure water pyrolysis of coal to evaluate the role of pressure on hydrocarbon generation and source rock maturation at high maturities under geological conditions. Organic Geochemistry, 78, 44-51. https://doi.org/10.1016/j.orggeochem.2014.10.013

© 2014 Elsevier Ltd. This study investigates the effect of water pressure on hydrocarbon generation and source rock maturation at high maturities for a perhydrous Tertiary Arctic coal, Svalbard. Using a 25. ml Hastalloy vessel, the coal was pyrolysed... Read More about High pressure water pyrolysis of coal to evaluate the role of pressure on hydrocarbon generation and source rock maturation at high maturities under geological conditions.

Spectroscopic Studies of Internal Injector Deposits (IDID) Resulting from the Use of Non-Commercial Low Molecular Weight Polyisobutylenesuccinimide (PIBSI) (2014)
Journal Article
Barker, J., Reid, J., Snape, C., Scurr, D., & Meredith, W. (2014). Spectroscopic Studies of Internal Injector Deposits (IDID) Resulting from the Use of Non-Commercial Low Molecular Weight Polyisobutylenesuccinimide (PIBSI). SAE International Journal of Fuels and Lubricants, 7(3), 762-770. https://doi.org/10.4271/2014-01-2720

Copyright © 2014 SAE International. Since 2009, there has been a rise in deposits of various types found in diesel fuel injection systems. They have been identified in the filter, the injector tip and recently inside the injector. The latter internal... Read More about Spectroscopic Studies of Internal Injector Deposits (IDID) Resulting from the Use of Non-Commercial Low Molecular Weight Polyisobutylenesuccinimide (PIBSI).

Capturing CO2 from ambient air using a polyethyleneimine–silica adsorbent in fluidized beds (2014)
Journal Article
Zhang, W., Liu, H., Sun, C., Drage, T. C., & Snape, C. E. (2014). Capturing CO2 from ambient air using a polyethyleneimine–silica adsorbent in fluidized beds. Chemical Engineering Science, 116, 306-316. https://doi.org/10.1016/j.ces.2014.05.018

Carbon Capture and Storage (CCS) uses a combination of technologies to capture, transport and store carbon dioxide (CO2) emissions from large point sources such as coal or natural gas-fired power plants. Capturing CO2 from ambient air has been consid... Read More about Capturing CO2 from ambient air using a polyethyleneimine–silica adsorbent in fluidized beds.

Performance of polyethyleneimine–silica adsorbent for post-combustion CO2 capture in a bubbling fluidized bed (2014)
Journal Article
Zhang, W., Liu, H., Sun, C., Drage, T. C., & Snape, C. E. (2014). Performance of polyethyleneimine–silica adsorbent for post-combustion CO2 capture in a bubbling fluidized bed. Chemical Engineering Journal, 251, 293-303. https://doi.org/10.1016/j.cej.2014.04.063

The high performance of polyethyleneimine (PEI)-based solid adsorbent for CO2 capture has been well recognized in thermogravimetric analysis (TGA) and small-scale fixed bed reactors through the measurements of their equilibrium capacities but has not... Read More about Performance of polyethyleneimine–silica adsorbent for post-combustion CO2 capture in a bubbling fluidized bed.

Influence of thermoplastic properties on coking pressure generation: Part IV - Further evidence of the role of bubble coalescence in the mechanism for pressure generation (2014)
Journal Article
CASTRO DIAZ, M., Steel, K. M., Castro Diaz, M., Duffy, J. J., Snape, C. E., & Mahoney, M. R. (2014). Influence of thermoplastic properties on coking pressure generation: Part IV - Further evidence of the role of bubble coalescence in the mechanism for pressure generation. Fuel, 129, 102-110. doi:10.1016/j.fuel.2014.03.035

Experimental study of mercury removal from exhaust gases (2014)
Journal Article
Wdowin, M., Wiatros-Motyka, M. M., Panek, R., Stevens, L. A., Franus, W., & Snape, C. E. (2014). Experimental study of mercury removal from exhaust gases. Fuel, 128, https://doi.org/10.1016/j.fuel.2014.03.041

An initial study has been made of the use of synthetic zeolites for mercury capture from exhaust gases. Synthetic zeolites (Na-X and Na-P1), and for comparison a natural zeolite (clinoptilolite) and activated carbon with bromine (AC/Br) were tested f... Read More about Experimental study of mercury removal from exhaust gases.

Nitrogen-enriched and hierarchically porous carbon macro-spheres-ideal for large-scale CO2 capture (2014)
Journal Article
Zhu, B., Li, K., Liu, J., Liu, H., Sun, C., Snape, C. E., & Guo, Z. (2014). Nitrogen-enriched and hierarchically porous carbon macro-spheres-ideal for large-scale CO2 capture. Journal of Materials Chemistry A, 2(15), doi:10.1039/c4ta00438h

A facile and efficient “spheridization” method is developed to produce nitrogen-enriched hierarchically porous carbon spheres of millimeters in diameter, with intricate micro-, meso- and macro-structural features. Such spheres not only show exception... Read More about Nitrogen-enriched and hierarchically porous carbon macro-spheres-ideal for large-scale CO2 capture.