All Outputs (34)

The development of a novel technique for small ring specimen tensile testing (2018)
Journal Article
Kazakeviciute, J., Rouse, J., De Focatiis, D., & Hyde, C. (2019). The development of a novel technique for small ring specimen tensile testing. Theoretical and Applied Fracture Mechanics, 99, 131-139. https://doi.org/10.1016/j.tafmec.2018.11.016

The wide scale use of small specimens in routine testing programs could significantly reduce material resource requirements (factors of 10 are easily achievable). This is a major benefit to situations where there is not enough material to manufacture... Read More about The development of a novel technique for small ring specimen tensile testing.

A neural network approach for determining spatial and geometry dependent Green's functions for thermal stress approximation in power plant header components (2018)
Journal Article
Rouse, J., Hyde, C., & Morris, A. (2018). A neural network approach for determining spatial and geometry dependent Green's functions for thermal stress approximation in power plant header components. International Journal of Pressure Vessels and Piping, 168, 269-288. https://doi.org/10.1016/j.ijpvp.2018.10.020

The trend in power generation to operate plant with a greater frequency of on/partial/off load conditions creates several concerns for the long term structural integrity of many high temperature components. The Green's function method has been used f... Read More about A neural network approach for determining spatial and geometry dependent Green's functions for thermal stress approximation in power plant header components.

A series hybrid “real inertia” energy storage system (2018)
Journal Article
Rouse, J., Garvey, S., Cárdenas, B., & Davenne, T. (2018). A series hybrid “real inertia” energy storage system. Journal of Energy Storage, 20, 1-15. https://doi.org/10.1016/j.est.2018.08.006

The wide scale market penetration of numerous renewable energy technologies is dependent, at least in part, on developing reliable energy storage methods that can alleviate concerns over potentially interrupted and uncertain supplies. Many challenges... Read More about A series hybrid “real inertia” energy storage system.

Stability of packed bed thermoclines (2018)
Journal Article
Davenne, T. R., Garvey, S. D., Cardenas, B., & Rouse, J. P. (2018). Stability of packed bed thermoclines. Journal of Energy Storage, 19, 192-200. https://doi.org/10.1016/j.est.2018.07.015

© 2018 Packed bed thermoclines have attracted considerable interest as an economical method for storing large amounts of thermal energy. They are a constituent part of a range of proposed thermo-mechanical energy storage systems, such as Adiabatic Co... Read More about Stability of packed bed thermoclines.

The Prediction of isothermal cyclic plasticity in 7175-T7351 aluminium alloy with particular emphasis on thermal ageing effects (2018)
Journal Article
Wing Cheong, M. L., Rouse, J., Hyde, C., & Kennedy, A. (2018). The Prediction of isothermal cyclic plasticity in 7175-T7351 aluminium alloy with particular emphasis on thermal ageing effects. International Journal of Fatigue, 114, 92-108. https://doi.org/10.1016/j.ijfatigue.2018.05.010

Rapid thermal ageing has been observed in the literature for certain aerospace aluminium alloys under conditions which are foreseeable in their intended component applications. While several experimental programs have explored this phenomenon in the... Read More about The Prediction of isothermal cyclic plasticity in 7175-T7351 aluminium alloy with particular emphasis on thermal ageing effects.

A case study investigation into the effects of spatially dependent convection coefficients on the fatigue response of a power plant header component (2018)
Journal Article
Rouse, J., Zacharzewski, P., Hyde, C., Jefferson-Loveday, R. J., Morris, A., & Kyaw, S. (2018). A case study investigation into the effects of spatially dependent convection coefficients on the fatigue response of a power plant header component. International Journal of Fatigue, 113, 137-148. https://doi.org/10.1016/j.ijfatigue.2018.03.032

Societal and environmental pressures are forcing thermal power plant operators to deviate greatly from the generation strategies of the past. The application of high frequency start up/shut down/partial load cycles to components that may well be outs... Read More about A case study investigation into the effects of spatially dependent convection coefficients on the fatigue response of a power plant header component.

A thermodynamically-based viscoelastic-viscoplastic model for the high temperature cyclic behaviour of 9-12% Cr steels (2018)
Journal Article
Benaarbia, A., Rouse, J. P., & Sun, W. (2018). A thermodynamically-based viscoelastic-viscoplastic model for the high temperature cyclic behaviour of 9-12% Cr steels. International Journal of Plasticity, 107, https://doi.org/10.1016/j.ijplas.2018.03.015

Improving the understanding of the long term rate dependent behaviour of materials is of critical importance in many engineering applications. Without this understanding, it is potentially difficult to ensure safe and effective plant operation while... Read More about A thermodynamically-based viscoelastic-viscoplastic model for the high temperature cyclic behaviour of 9-12% Cr steels.

Experimental and numerical analysis of initial plasticity in P91 steel small punch creep samples (2017)
Journal Article
Cortellino, F., Sun, W., Rouse, J. P., Cacciapuoti, B., & Hyde, T. (in press). Experimental and numerical analysis of initial plasticity in P91 steel small punch creep samples. Experimental Mechanics, 57(8), https://doi.org/10.1007/s11340-017-0296-9

To date, the complex behaviour of small punch creep test (SPCT) specimens has not been completely understood, making the test hard to numerically model and the data difficult to interpret. This paper presents a novel numerical model able to generate... Read More about Experimental and numerical analysis of initial plasticity in P91 steel small punch creep samples.

Effects of surface roughness on thermo-mechanical fatigue life of a P91 power plant steel (2016)
Journal Article
Kyaw, S. T., Rouse, J. P., Lu, J., & Sun, W. (in press). Effects of surface roughness on thermo-mechanical fatigue life of a P91 power plant steel. https://doi.org/10.1016/j.prostr.2016.06.086

P91 martensitic steel has now been widely used for power plant components such as steam pipe sections and headers. With the shift to renewable sources, traditional fossil power plants are increasingly expected to operate under so called “two shifting... Read More about Effects of surface roughness on thermo-mechanical fatigue life of a P91 power plant steel.

Determination of material parameters for a unified viscoplasticity-damage model for a P91 power plant steel (2016)
Journal Article
Kyaw, S. T., Rouse, J. P., Lu, J., & Sun, W. (2016). Determination of material parameters for a unified viscoplasticity-damage model for a P91 power plant steel. International Journal of Mechanical Sciences, 115-116, https://doi.org/10.1016/j.ijmecsci.2016.06.014

Societal pressures are mounting on electricity operators to operate traditional fossil-fuel power plants in an efficient and flexible manner in conjunction with renewable power plants. This requires the uses of high frequency start up – shut down loa... Read More about Determination of material parameters for a unified viscoplasticity-damage model for a P91 power plant steel.

A comparison of simple methods to incorporate material temperature dependency in the Green’s function method for estimating transient thermal stresses in thick-walled power plant components (2016)
Journal Article
Rouse, J., & Hyde, C. J. (in press). A comparison of simple methods to incorporate material temperature dependency in the Green’s function method for estimating transient thermal stresses in thick-walled power plant components. Materials, 9(1), https://doi.org/10.3390/ma9010026

The threat of thermal fatigue is an increasing concern for thermal power plant operators due to the increasing tendency to adopt “two-shifting” operating procedures. Thermal plants are likely to remain part of the energy portfolio for the foreseeable... Read More about A comparison of simple methods to incorporate material temperature dependency in the Green’s function method for estimating transient thermal stresses in thick-walled power plant components.

Pragmatic optimisation methods for determining material constants of viscoplasticity model from isothermal experimental data (2013)
Journal Article
Rouse, J. P., Hyde, C. J., Sun, W., & Hyde, T. (in press). Pragmatic optimisation methods for determining material constants of viscoplasticity model from isothermal experimental data. Materials Science and Technology, 30(1), https://doi.org/10.1179/1743284713Y.0000000277

A procedure to estimate material constants for the unified Chaboche viscoplasticity model from experimental data has been published elsewhere; however several critical assumptions are made to enable this and potential numerical problems can limit the... Read More about Pragmatic optimisation methods for determining material constants of viscoplasticity model from isothermal experimental data.

Comparison of several optimisation strategies for the determination of material constants in the Chaboche visco-plasticity model (2013)
Journal Article
Rouse, J. P., Hyde, C. J., Sun, W., & Hyde, T. (2013). Comparison of several optimisation strategies for the determination of material constants in the Chaboche visco-plasticity model. Journal of Strain Analysis for Engineering Design, 48(6), https://doi.org/10.1177/0309324713490925

Determining representative material constant sets for models that can accurately predict the complex plasticity and creep behaviour of components undergoing cyclic loading is of great interest to many industries. The Chaboche unified visco-plasticity... Read More about Comparison of several optimisation strategies for the determination of material constants in the Chaboche visco-plasticity model.

Effective determination of cyclic-visco-plasticity material properties using an optimisation procedure and experimental data exhibiting scatter (2013)
Journal Article
Rouse, J. P., Hyde, C. J., Sun, W., & Hyde, T. H. (2013). Effective determination of cyclic-visco-plasticity material properties using an optimisation procedure and experimental data exhibiting scatter. Materials at High Temperatures, 30(2), 117-128. https://doi.org/10.3184/096034013x13720928952114

It may be inevitable in the design and analysis of most high temperature components (such as power industry pipe work) that variations in load and/or temperature will occur in normal operation. This presents complications in the prediction of the res... Read More about Effective determination of cyclic-visco-plasticity material properties using an optimisation procedure and experimental data exhibiting scatter.