Skip to main content

Research Repository

Advanced Search

All Outputs (23)

Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction (2022)
Journal Article
Zou, T., Gerada, D., La Rocca, S., La Rocca, A., Walker, A., Vakil, G., …Gerada, C. (2023). Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction. IEEE Transactions on Industry Applications, 59(2), 1557-1570. https://doi.org/10.1109/TIA.2022.3225255

Synchronous reluctance (Syn-Rel) machines with embedded permanent magnets (PMs) are research hotspots in variable speed motor drives due to their robust rotor structure and wide constant power speed range (CPSR). In this paper, the potential of PM-as... Read More about Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction.

Mild hybridisation of turboprop engine with high-power-density integrated electric drives (2022)
Journal Article
Cossart, G., Chen, Y., Yang, T., Khowja, M., La Rocca, A., Nasir, U., …Wheeler, P. (2022). Mild hybridisation of turboprop engine with high-power-density integrated electric drives. IEEE Transactions on Transportation Electrification, 8(4), 4148-4162. https://doi.org/10.1109/TTE.2022.3160153

This paper shares with the aerospace community a case study of turboprop mild hybridisation using a recently developed integrated drive system in the University of Nottingham, UK, within the ACHIEVE project under EU H2020 CleanSky 2 program (project... Read More about Mild hybridisation of turboprop engine with high-power-density integrated electric drives.

Design Optimization of Modular Permanent Magnet Machine with Triple Three-Phase for Aircraft Starter Generator (2022)
Journal Article
Wang, B., Rocca, A., Vakil, G., Yang, T., & Gerada, C. (2022). Design Optimization of Modular Permanent Magnet Machine with Triple Three-Phase for Aircraft Starter Generator. SAE Technical Papers, https://doi.org/10.4271/2022-01-0055

Permanent magnet (PM) electrical machine has far-reaching impacts in aviation electrification due to the continuous development in high power density and high efficiency electrical drives. The primary barrier to acceptance of permanent magnet machine... Read More about Design Optimization of Modular Permanent Magnet Machine with Triple Three-Phase for Aircraft Starter Generator.

A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors (2022)
Journal Article
Zou, T., Gerada, D., La Rocca, A., Moslemin, M., Cairns, A., Cui, M., …Gerada, C. (2022). A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors. IEEE Transactions on Transportation Electrification, 8(3), 3578-3593. https://doi.org/10.1109/TTE.2022.3149786

The rapidly increasing demand on power density levels of electric vehicle (EV) drive systems is pushing the boundaries of traction motor performance. Hairpin windings are becoming a popular option for EV motors due to their reduced DC losses and impr... Read More about A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors.

Measurement of Sub-23 nm Particulate Emissions from GDI Engines: A Comparison of Processing Methods (2021)
Journal Article
Pfau, S. A., Haffner-Staton, E., & La Rocca, A. (2021). Measurement of Sub-23 nm Particulate Emissions from GDI Engines: A Comparison of Processing Methods. SAE Technical Papers, Article 2021-01-0626. https://doi.org/10.4271/2021-01-0626

Engine research has increasingly focused on emission of sub 23 nm particulates in recent years. Likewise, current legislative efforts are being made for particulate number (PN) emission limits to include this previously omitted size range. In Europe,... Read More about Measurement of Sub-23 nm Particulate Emissions from GDI Engines: A Comparison of Processing Methods.

4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft (2021)
Journal Article
Golovanov, D., Gerada, D., Sala, G., Degano, M., Trentin, A., Connor, P. H., …Gerada, C. (2021). 4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft. IEEE Transactions on Transportation Electrification, 7(4), 2952-2964. https://doi.org/10.1109/TTE.2021.3068928

This article describes the underpinning research, development, construction, and testing of a 4-MW multithree phase generator designed for a hybrid-electric aircraft propulsion system demonstrator. The aim of the work is to demonstrate gravimetric po... Read More about 4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft.

Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation (2020)
Journal Article
Trentin, A., Sala, G., Tarisciotti, L., Galassini, A., Degano, M., Connor, P. H., …Gerada, C. (2021). Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation. IEEE Transactions on Industrial Electronics, 68(12), 11684-11695. https://doi.org/10.1109/TIE.2020.3040692

In this article, we describe the research and development of a 3 kV active rectifier for a 4 MW aerospace generator drive system demonstrator. The converter is fed by a multiphase high-speed/high-frequency permanent magnet generator. The main aim of... Read More about Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation.

Investigating the impact of copper leaching on combustion characteristics and particulate emissions in HPCR diesel engines (2019)
Journal Article
La Rocca, A., Ferrante, A., Haffner-Staton, E., Cairns, A., Weilhard, A., Sans, V., …Laforgia, D. (2020). Investigating the impact of copper leaching on combustion characteristics and particulate emissions in HPCR diesel engines. Fuel, 263, Article 116719. https://doi.org/10.1016/j.fuel.2019.116719

© 2019 Elsevier Ltd Copper leaching in diesel fuel and its impact on combustion and emission characteristics of a Direct Injection High Pressure Common Rail (DI HPCR) diesel engine was investigated. This work was performed using a single cylinder Ric... Read More about Investigating the impact of copper leaching on combustion characteristics and particulate emissions in HPCR diesel engines.

Quantifying soot nanostructures: Importance of image processing parameters for lattice fringe analysis (2019)
Journal Article
Pfau, S. A., La Rocca, A., & Fay, M. W. (2020). Quantifying soot nanostructures: Importance of image processing parameters for lattice fringe analysis. Combustion and Flame, 211, 430-444. https://doi.org/10.1016/j.combustflame.2019.10.020

Fringe analysis is a commonly used method to quantify soot nanostructures. However, the settings of the involved filters and their impact on the results are rarely addressed. In this study, the influence of the three filter parameters as well as two... Read More about Quantifying soot nanostructures: Importance of image processing parameters for lattice fringe analysis.

Numerical investigations of convective phenomena of oil impingement on end-windings (2019)
Journal Article
Connor, P. H., La Rocca, A., Xu, Z., Eastwick, C. N., Pickering, S. J., & Gerada, C. (2019). Numerical investigations of convective phenomena of oil impingement on end-windings. Journal of Engineering, 2019(17), 4022-4026. https://doi.org/10.1049/joe.2018.8027

A novel experimental rig for analysing intensive liquid cooling of highly power-dense electrical machine components has been developed. Coupled fluid flow and heat transfer have been modelled, using computational fluid dynamics (CFD), to inform the d... Read More about Numerical investigations of convective phenomena of oil impingement on end-windings.

Assessing the Accuracy of Soot Nanoparticle Morphology Measurements Using Three-Dimensional Electron Tomography (2019)
Journal Article
Haffner-Staton, E., La Rocca, A., Cairns, A., McGhee, M., & Fay, M. (2019). Assessing the Accuracy of Soot Nanoparticle Morphology Measurements Using Three-Dimensional Electron Tomography. SAE Technical Papers, 2019-April, Article 2019-01-1188. https://doi.org/10.4271/2019-01-1188

Morphology plays an important role in determining behaviour and impact of soot nanoparticles, including effect on human health, atmospheric optical properties, contribution to engine wear, and role in marine ecology. However, its nanoscopic size has... Read More about Assessing the Accuracy of Soot Nanoparticle Morphology Measurements Using Three-Dimensional Electron Tomography.

Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine? (2019)
Journal Article
Pfau, S. A., La Rocca, A., Haffner-Staton, E., Rance, G. A., Fay, M. W., & McGhee, M. (2019). Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine?. SAE Technical Papers, 2019-April, Article 2019-01-0301. https://doi.org/10.4271/2019-01-0301

Formation of soot is a known phenomenon for diesel engines, however, only recently emerged for gasoline engines with the introduction of direct injection systems. Soot-in-oil samples from a three-cylinder turbo-charged gasoline direct injection (GDI)... Read More about Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine?.

Development of aircraft electric starter-generator system based-on active rectification technology (2018)
Journal Article
Bozhko, S., Yang, T., Le Peuvedic, J., Arumugam, P., Degano, M., La Rocca, A., …Wheeler, P. (2018). Development of aircraft electric starter-generator system based-on active rectification technology. IEEE Transactions on Transportation Electrification, 4(4), 985-996. https://doi.org/10.1109/TTE.2018.2863031

More-electric aircraft (MEA) has become a dominant trend for modern aircraft. On-board MEA, many functions, which are conventionally driven by pneumatic and hydraulic power, are replaced with electrical subsystems. Starting aircraft engines with an e... Read More about Development of aircraft electric starter-generator system based-on active rectification technology.

Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black (2018)
Journal Article
Pfau, S., La Roca, A., Haffner-Staton, E., Rance, G., Fay, M., Brough, R., & Malizia, S. (2018). Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black. Carbon, 139, 342-352. https://doi.org/10.1016/j.carbon.2018.06.050

Two gasoline turbocharged direct injection (GTDI) and two diesel soot-in-oil samples were compared with one flame-generated soot sample. High resolution transmission electron microscopy imaging was employed for the initial qualitative assessment of t... Read More about Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black.

Progress towards a methodology for high throughput 3D reconstruction of soot nanoparticles via electron tomography (2018)
Journal Article
Haffner-Staton, E., La Rocca, A., & Fay, M. (2018). Progress towards a methodology for high throughput 3D reconstruction of soot nanoparticles via electron tomography. Journal of Microscopy, 270(3), 272-289. https://doi.org/10.1111/jmi.12680

The aim of this work is to make progress towards the development of 3D reconstruction as a legitimate alternative to traditional 2D characterisation of soot. Time constraints are the greatest opposition to its implementation, as currently reconstruct... Read More about Progress towards a methodology for high throughput 3D reconstruction of soot nanoparticles via electron tomography.

Towards keeping diesel fuel supply and demand in balance: dual-fuelling of diesel engines with natural gas (2016)
Journal Article
Hegab, A., La Rocca, A., & Shayler, P. (2017). Towards keeping diesel fuel supply and demand in balance: dual-fuelling of diesel engines with natural gas. Renewable and Sustainable Energy Reviews, 70, 666-697. https://doi.org/10.1016/j.rser.2016.11.249

With the continuous growth of energy demand for the commercial transport sector, the market share of diesel vehicles is rising in several areas worldwide. Global demand for transport energy is therefore believed to be strongly skewed towards heavier... Read More about Towards keeping diesel fuel supply and demand in balance: dual-fuelling of diesel engines with natural gas.

Characterisation of flame-generated soot and soot-in-oil using electron tomography volume reconstructions and comparison with traditional 2D-TEM measurements (2016)
Journal Article
Orhan, O., Haffner-Staton, E., La Rocca, A., & Fay, M. (2016). Characterisation of flame-generated soot and soot-in-oil using electron tomography volume reconstructions and comparison with traditional 2D-TEM measurements. Tribology International, 104, 272-284. https://doi.org/10.1016/j.triboint.2016.09.015

This work characterises soot nanoparticles by electron tomography using Weighted Back Projection algorithm and appraises the uncertainties in two-dimensional calculations by comparison with 3D parameters for flame-generated soot and diesel soot-in-oi... Read More about Characterisation of flame-generated soot and soot-in-oil using electron tomography volume reconstructions and comparison with traditional 2D-TEM measurements.

High-Speed Solid Rotor Permanent Magnet Machines: Concept and Design (2016)
Journal Article
Arumugam, P., Xu, Z., La Rocca, A., Vakil, G., Dickinson, M., Amankwah, E. K., …Pickering, S. (2016). High-Speed Solid Rotor Permanent Magnet Machines: Concept and Design. IEEE Transactions on Transportation Electrification, 2(3), 391-400. https://doi.org/10.1109/TTE.2016.2592684

© 2015 IEEE. This paper proposes a novel solid rotor topology for an interior permanent magnet (IPM) machine, adopted in this case for an aircraft starter-generator design. The key challenge in the design is to satisfy two operating conditions that a... Read More about High-Speed Solid Rotor Permanent Magnet Machines: Concept and Design.

The initiation and development of combustion under cold idling conditions using a glow plug in diesel engines (2016)
Journal Article
Li, Q., Shayler, P. J., McGhee, M. J., & La Rocca, A. (2017). The initiation and development of combustion under cold idling conditions using a glow plug in diesel engines. International Journal of Engine Research, 18(3), 240-255. https://doi.org/10.1177/1468087416652266

Factors determining the success or failure of combustion initiation using a glow plug have been investigated through experimental work on a single cylinder, common rail diesel engine with a geometric compression ratio of 15.5, and a quiescent combust... Read More about The initiation and development of combustion under cold idling conditions using a glow plug in diesel engines.

Soot-in-oil 3D volume reconstruction through the use of electron tomography: an introductory study (2015)
Journal Article
La Rocca, A., Campbell, J., Fay, M., & Orhan, O. (2016). Soot-in-oil 3D volume reconstruction through the use of electron tomography: an introductory study. Tribology Letters, 61(1), Article 8. https://doi.org/10.1007/s11249-015-0625-z

Understanding soot nanoparticle interaction with oil additives and the causes of soot-induced thickening would assist in lubricant formulation, prolonging engine life and improving engine efficiency. Three-dimensional measurement of soot structures i... Read More about Soot-in-oil 3D volume reconstruction through the use of electron tomography: an introductory study.