Skip to main content

Research Repository

Advanced Search

All Outputs (11)

Mathematical approach to the validation of field surface texture parameter software (2020)
Journal Article
Todhunter, L., Leach, R., Lawes, S., Harris, P., & Blateyron, F. (2020). Mathematical approach to the validation of field surface texture parameter software. Surface Topography: Metrology and Properties, 8(1), Article 015010. https://doi.org/10.1088/2051-672x/ab7367

A new method for performance validation of surface texture parameter calculation software is introduced, focussing on field surface texture parameters. Surface height functions are defined mathematically, either using Fourier series or polynomials, a... Read More about Mathematical approach to the validation of field surface texture parameter software.

Increasing throughput in x-ray computed tomography measurement of surface topography using sinogram interpolation (2019)
Journal Article
Körner, L., Lawes, S., Bate, D., Newton, L., Senin, N., & Leach, R. K. (2019). Increasing throughput in x-ray computed tomography measurement of surface topography using sinogram interpolation. Measurement Science and Technology, 30(12), Article 125002. https://doi.org/10.1088/1361-6501/ab37e5

© 2019 Crown copyright. Reproduced with the permission of the Controller of Her Majesty's Stationery Office. X-ray computed tomography (XCT) is a non-destructive imaging technique that has recently gained interest as a tool to measure surface topogra... Read More about Increasing throughput in x-ray computed tomography measurement of surface topography using sinogram interpolation.

Mathematical approach to the validation of functional surface texture parameter software (2019)
Journal Article
Todhunter, L., Leach, R., Lawes, S., Harris, P., & Blateyron, F. (2019). Mathematical approach to the validation of functional surface texture parameter software. Surface Topography: Metrology and Properties, 7(1), Article 015020. https://doi.org/10.1088/2051-672X/ab07ca

A new method for performance validation of surface texture parameter calculation software is introduced, focussing on functional surface texture parameters. Material ratio curves are defined algebraically and used to calculate functional surface text... Read More about Mathematical approach to the validation of functional surface texture parameter software.

Internal surface measurement of metal powder bed fusion parts (2018)
Journal Article
Thompson, A., Senin, N., Maskery, I., Körner, L., Lawes, S., & Leach, R. (2018). Internal surface measurement of metal powder bed fusion parts. Additive Manufacturing, 20, https://doi.org/10.1016/j.addma.2018.01.003

Recent advances in X-ray computed tomography (XCT) have allowed for measurement resolutions approaching the point where XCT can be used for measuring surface topography. These advances make XCT appealing for measuring hard-to-reach or internal surfac... Read More about Internal surface measurement of metal powder bed fusion parts.

A microscopy approach for in situ inspection of the ?CMM stylus for contamination (2017)
Journal Article
Feng, X., Pascal, J., & Lawes, S. (in press). A microscopy approach for in situ inspection of the ?CMM stylus for contamination. Measurement Science and Technology, 28(9), https://doi.org/10.1088/1361-6501/aa7c93

During the µCMM measurement process, contamination gradually builds up on the surface of the stylus tip and affects dimensional accuracy of the measurement. Regular inspection of the stylus for contamination is essential in determining the appropriat... Read More about A microscopy approach for in situ inspection of the ?CMM stylus for contamination.

Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry (2017)
Journal Article
Gomez, C., Su, R., Thompson, A., DiSciacca, J., Lawes, S., & Leach, R. K. (2017). Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry. Optical Engineering, 56(11), 1-8. https://doi.org/10.1117/1.OE.56.11.111714

Surface topography measurement for metal additive manufacturing (AM) is a challenging task for contact and non-contact methods. In this paper, we present an experimental investigation of the use of coherence scanning interferometry (CSI) for measurem... Read More about Optimization of surface measurement for metal additive manufacturing using coherence scanning interferometry.

Industrial survey of ISO surface texture parameters (2017)
Journal Article
Todhunter, L. D., Leach, R., Lawes, S., & Blateyron, F. (2017). Industrial survey of ISO surface texture parameters. CIRP Journal of Manufacturing Science and Technology, 19, https://doi.org/10.1016/j.cirpj.2017.06.001

Results of an international survey are presented, detailing the use of surface texture parameters in industry. The survey received 179 responses from a total of 34 countries, revealing the use of a variety of parameters from ISO 4287, ISO 12085, ISO... Read More about Industrial survey of ISO surface texture parameters.

An analysis of type F2 software measurement standards for profile surface texture parameters (2017)
Journal Article
Todhunter, L. D., Leach, R. K., Lawes, S., & Blateyron, F. (2017). An analysis of type F2 software measurement standards for profile surface texture parameters. Measurement Science and Technology, 28(6), Article 065017. https://doi.org/10.1088/1361-6501/aa6924

This paper reports on an in-depth analysis of ISO 5436 part 2 type F2 reference software for the calculation of profile surface texture parameters that has been performed on the input, implementation and output results of the reference software devel... Read More about An analysis of type F2 software measurement standards for profile surface texture parameters.

Development of CO2 snow cleaning for in situ cleaning of µCMM stylus tips (2016)
Journal Article
Feng, X., Kinnell, P. K., & Lawes, S. (in press). Development of CO2 snow cleaning for in situ cleaning of µCMM stylus tips. Measurement Science and Technology, 28(1), https://doi.org/10.1088/1361-6501/28/1/015007

Contamination adhered to the surface of a µCMM stylus tip compromises the measurement accuracy of the µCMM system, potentially causing dimensional errors that are over ten times larger than the uncertainty of a modern µCMM. In prior work by the autho... Read More about Development of CO2 snow cleaning for in situ cleaning of µCMM stylus tips.

Performance assessment of a new variable stiffness probing system for micro-CMMs (2016)
Journal Article
Alblahaihid, K., Kinnell, P., Lawes, S., Desgaches, D., & Leach, R. K. (2016). Performance assessment of a new variable stiffness probing system for micro-CMMs. Sensors, 16(4), Article 492. https://doi.org/10.3390/s16040492

When designing micro-scale tactile probes, a design trade-off must be made between the stiffness and flexibility of the probing element. The probe must be flexible enough to ensure sensitive parts are not damaged during contact, but it must be stiff... Read More about Performance assessment of a new variable stiffness probing system for micro-CMMs.