Skip to main content

Research Repository

Advanced Search

All Outputs (786)

Improving the development and reusability of Industrial AI through Semantic Models (2024)
Conference Proceeding
Martínez-Arellano, G., & Ratchev, S. (in press). Improving the development and reusability of Industrial AI through Semantic Models.

Despite some of the success of AI, particularly machine learning, in industrial applications such as condition monitoring, quality inspection and asset control , solutions are typically bespoke and not robust in the long term. There is a considerable... Read More about Improving the development and reusability of Industrial AI through Semantic Models.

How does explainability affect perceived transparency, trust, acceptance and usefulness? (2024)
Conference Proceeding
Ding, Y., & Hermawati, S. (in press). How does explainability affect perceived transparency, trust, acceptance and usefulness?.

The effects of explainability on perceived trust, transparency, acceptance and usefulness were explored in a within subjects study (n=15) using an online shopping recommender system as a context. The study investigated three levels of explainability... Read More about How does explainability affect perceived transparency, trust, acceptance and usefulness?.

Manufacturable Edgewise Winding Solutions Considering Parallel Slot and Parallel Tooth Stator Structures (2023)
Conference Proceeding
George, L., Walker, A., Zhang, F., Vakil, G., & Gerada, C. (2023). Manufacturable Edgewise Winding Solutions Considering Parallel Slot and Parallel Tooth Stator Structures. . https://doi.org/10.1109/oncon60463.2023.10431188

Due to climate concerns, the push towards transportation electrification to deliver electric machines capable of high-power density performance is becoming increasingly critical. A key component of this is the structure and manufacture of the winding... Read More about Manufacturable Edgewise Winding Solutions Considering Parallel Slot and Parallel Tooth Stator Structures.

Power Flow Analysis of Advanced Power Generation Centre for More Electric Aircraft (2023)
Conference Proceeding
Bai, G., Bozhko, S., Yang, T., Wheeler, P., & Yeoh, S. S. (2023). Power Flow Analysis of Advanced Power Generation Centre for More Electric Aircraft. . https://doi.org/10.1109/itecasia-pacific59272.2023.10372301

The more-electric aircraft (MEA) has been seen as the most major trend in the aerospace industry. With the increase in electrified loads, there is the need to generate more electrical power on-board aircraft. Considering regional jet sized aircraft,... Read More about Power Flow Analysis of Advanced Power Generation Centre for More Electric Aircraft.

Property enhancement of recycled concrete aggregates through surface treatment (2023)
Conference Proceeding
Wang, H., Fang, Y., Wang, F., & Airey, G. D. (2023). Property enhancement of recycled concrete aggregates through surface treatment. In Advances in Functional Pavements - Proceedings of the 7th Chinese-European Workshop on Functional Pavements, CEW 2023 (116-121). https://doi.org/10.1201/9781003387374-23

Recycled concrete aggregate (RCA) retrieved from construction demolition and excavation waste is widely used as an alternative to natural aggregate (NA) in the construction industry. However, the weak adhered mortar adversely affects the properties o... Read More about Property enhancement of recycled concrete aggregates through surface treatment.

A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs (2023)
Conference Proceeding
Zhu, G., Xu, Z., Zhang, F., Gerada, C., & Gerada, D. (2023). A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs. In 26th International Conference on Electrical Machines and Systems (ICEMS). https://doi.org/10.1109/icems59686.2023.10344616

Thermal management is critical for high-power-density permanent magnet synchronous machines (PMSMs). To realize the efficient and effective design optimization of self-ventilated air cooling systems for PMSMs, in this paper, a Taguchi-preconditioned... Read More about A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs.

The Challenges of Conducting Transdisciplinary Engineering Research: A Case Study of the Made Smarter Innovation: Centre for People-Led Digitalisation (2023)
Conference Proceeding
Lattanzio, S., Goh, Y. M., Houghton, R., & Newnes, L. (2023). The Challenges of Conducting Transdisciplinary Engineering Research: A Case Study of the Made Smarter Innovation: Centre for People-Led Digitalisation. In Proceedings of the 30th ISTE International Conference on Transdisciplinary Engineering, Hua Hin Cha Am, Thailand, July 11–14, 2023 (751-760). https://doi.org/10.3233/atde230672

In order to meet growing complexity in societal and industrial requirements for engineering projects, there is a growing need for research projects that transcend traditional single discipline silos. Widespread experience and a growing academic liter... Read More about The Challenges of Conducting Transdisciplinary Engineering Research: A Case Study of the Made Smarter Innovation: Centre for People-Led Digitalisation.

The Need for a Symbiotic Interface for a Digital Twin (2023)
Conference Proceeding
Palmer, C., Goh, Y. M., Hubbard, E., Grant, R., & Houghton, R. (2023). The Need for a Symbiotic Interface for a Digital Twin. In Leveraging transdisciplinary engineering in a changing and connected world : proceedings of the 30th ISTE international conference on transdisciplinary engineering (873 - 882). https://doi.org/10.3233/ATDE230685

Human interaction with a Digital Twin is an emerging concept for which there are no common definitions. This paper considers the various types of human interaction with Digital Twins. There is very little research considering human cognitive interact... Read More about The Need for a Symbiotic Interface for a Digital Twin.

Frequent Deep-Space Access Strategy for Venus Aeronomic Exploration Mission using Earth-Synchronous Orbits (2023)
Conference Proceeding
Ito, D., Pushparaj, N., & Kawakatsu, Y. (2023). Frequent Deep-Space Access Strategy for Venus Aeronomic Exploration Mission using Earth-Synchronous Orbits.

Geostationary transfer orbits (GTO) are earth-centric orbits widely used for kick-stage operations of satellites for deep space exploration missions. A rideshare spacecraft parked or deployed in GTOs usually requires minimal transfer cost compared to... Read More about Frequent Deep-Space Access Strategy for Venus Aeronomic Exploration Mission using Earth-Synchronous Orbits.

Breaking the Cycle: Novel Capture Mechanisms for Active Space Debris Removal (2023)
Conference Proceeding
Taggart, A., Harris, J., Pushparaj, N., & Cappelletti, C. (2023). Breaking the Cycle: Novel Capture Mechanisms for Active Space Debris Removal.

Since the launch of Sputnik 1 in 1957, over 6000 rockets and more than 11,300 satellites have been launched into space, resulting in a high number of artificial space debris in orbit around Earth. Of this debris, there are over one million objects be... Read More about Breaking the Cycle: Novel Capture Mechanisms for Active Space Debris Removal.

Quasi-solar Synchronous Orbit around the Moon based on Spatial Distant Retrograde Orbits (2023)
Conference Proceeding
Peng, L., Liang, Y., Pushparaj, N., & Shi, P. (2023). Quasi-solar Synchronous Orbit around the Moon based on Spatial Distant Retrograde Orbits.

The last several decades have witnessed the rapid development of lunar exploration, promoting researches on various types of lunar orbits including Distant Retrograde Orbits (abbr. DRO) that are feasible for orbiting tasks due to their stability. Man... Read More about Quasi-solar Synchronous Orbit around the Moon based on Spatial Distant Retrograde Orbits.

Optimal Transfer Trajectories between Relative Quasi-Satellite Orbits (2023)
Conference Proceeding
Pushparaj, N., Hiraiwa, N., & Bando, M. (2023). Optimal Transfer Trajectories between Relative Quasi-Satellite Orbits.

Quasi-satellite orbits (QSOs) are stable retrograde orbits in the restricted three-body problem that have gained attention as a viable candidate for future deep-space missions towards remote planetary satellites. Several mission design proposal uses... Read More about Optimal Transfer Trajectories between Relative Quasi-Satellite Orbits.

IEEE VTS Motor Vehicles Challenge 2024 - Energy and Powertrain Losses Management of an e-Racing Vehicle (2023)
Conference Proceeding
Li, K., & Vo-Duy, T. (2023). IEEE VTS Motor Vehicles Challenge 2024 - Energy and Powertrain Losses Management of an e-Racing Vehicle. In 2023 IEEE Vehicle Power and Propulsion Conference (VPPC). https://doi.org/10.1109/vppc60535.2023.10403256

Motor Vehicle Challenge, supported by IEEE Vehicular Technology Society, is an annual activity to find an appropriate energy management strategy to improve electric vehicles’ performance. In Challenge 2024, power losses and efficiency of power conver... Read More about IEEE VTS Motor Vehicles Challenge 2024 - Energy and Powertrain Losses Management of an e-Racing Vehicle.

Modelling Photonic Crystal Surface Emitting Lasers (PCSELs) with Iterative Weighted Index Method (2023)
Conference Proceeding
Lang, B., Vukovic, A., Sewell, P., Rihani, S., Boylan, K., Berry, G., …Rawsthorne, J. (2023). Modelling Photonic Crystal Surface Emitting Lasers (PCSELs) with Iterative Weighted Index Method. In 2023 International Conference on Electromagnetics in Advanced Applications (ICEAA) (485 - 485). https://doi.org/10.1109/ICEAA57318.2023.10297919

Photonic crystal surface emitting lasers (PCSELs) are a promising type of semiconductor laser, able to maintain single-mode operation over a large area, resulting in a high-power beam with small angular divergence.

Methodology for Digital Transformation: A Continuous Improvement Approach (2023)
Conference Proceeding
Hernández Oliver, K., Martínez-Arellano, G., & Segal, J. (2023). Methodology for Digital Transformation: A Continuous Improvement Approach. In 1st Workshop on Low-Cost Digital Solutions for Industrial Automation

Digital technologies have the potential to significantly transform the manufacturing industry by achieving improvements in productivity, quality and sustainability. Despite this, the uptake is relatively low as companies face a number of challenges i... Read More about Methodology for Digital Transformation: A Continuous Improvement Approach.

Low-cost System for Visual Inspection of Corrosion: An Industrial Case Study (2023)
Conference Proceeding
Hernández Oliver, K. H., Martínez-Arellano, G., & Segal, J. (2023). Low-cost System for Visual Inspection of Corrosion: An Industrial Case Study. In 1st Workshop on Low-Cost Digital Solutions for Industrial Automation

The use of digital technologies around the world has increased considerably, modifying the way in which daily activities are conducted. The manufacturing sector is no exception. Over the last decade, digital technologies have become a key element for... Read More about Low-cost System for Visual Inspection of Corrosion: An Industrial Case Study.

Efficient decision-making in SMEs: leveraging knowledge graphs with Neo4j and AI vision (2023)
Conference Proceeding
Mo, F., Ur Rehman, H. U., Elshafei, B., Chaplin, J. C., Sanderson, D., Martínez-Arellano, G., & Ratchev, S. (2023). Efficient decision-making in SMEs: leveraging knowledge graphs with Neo4j and AI vision. In Low-Cost Digital Solutions for Industrial Automation (LoDiSA 2023). https://doi.org/10.1049/icp.2023.1736

In the evolving digital landscape, Small and Medium-sized Enterprises (SMEs) grapple with the intricate task of managing vast manufacturing data while operating within budgetary constraints. Addressing this dichotomy, our research introduces an innov... Read More about Efficient decision-making in SMEs: leveraging knowledge graphs with Neo4j and AI vision.

I, AV: A Ghost Driver Field Study Exploring the Application of Anthropomorphism in AV-Pedestrian Communication (2023)
Conference Proceeding
Large, D. R., Hallewell, M., Li, X., Harvey, C., & Burnett, G. (2023). I, AV: A Ghost Driver Field Study Exploring the Application of Anthropomorphism in AV-Pedestrian Communication. In AutomotiveUI '23 Adjunct: Adjunct Proceedings of the 15th International Conference on Automotive User Interfaces and Interactive Vehicular Applications (127-132). https://doi.org/10.1145/3581961.3609883

We employed the 'Ghost Driver' methodology to emulate an autonomous vehicle (AV) and explored pedestrians' (n=520) crossing behaviour in response to external human-machine interfaces (eHMIs). Three eHMI designs were created to replace absent pedestri... Read More about I, AV: A Ghost Driver Field Study Exploring the Application of Anthropomorphism in AV-Pedestrian Communication.

Identifying Variation in the Newborn Life Support Procedure: An Automated Method (2023)
Conference Proceeding
Tan, A., Remenyte-Prescott, R., Egede, J., Valstar, M., & Sharkey, D. (2023). Identifying Variation in the Newborn Life Support Procedure: An Automated Method. In M. P. Brito, T. Aven, P. Baraldi, M. Čepin, & E. Zio (Eds.), Proceedings of the 33rd European Safety and Reliability Conference (ESREL 2023) (607-614)

This research is conducted for developing an automated method to recognize variations in the Newborn Life Support (NLS) procedure. Compliance with the NLS standard guideline is essential to prevent any adverse consequences for the newborn. Video reco... Read More about Identifying Variation in the Newborn Life Support Procedure: An Automated Method.

The Integration of Green Building Technologies into the Construction Sector of Developing Countries: The Case of Ghana (2023)
Conference Proceeding
Genfi, N., & Tokbolat, S. (2023). The Integration of Green Building Technologies into the Construction Sector of Developing Countries: The Case of Ghana. In A. Tutesigensi, & C. J. Neilson (Eds.), Proceedings of the 39th Annual ARCOM Conference (810-819)

Emerging climate change crisis, resources scarcity and global sustainability agenda are putting pressures on developing nations and demanding actions. This study aimed to examine the significance of introducing green building technologies (GBTs) in... Read More about The Integration of Green Building Technologies into the Construction Sector of Developing Countries: The Case of Ghana.