All Outputs (5331)

Coupled centrifuge-numerical modelling of shallow strip foundations (2024)
Presentation / Conference
Tang, C., Selvaraj, S. P., Heron, C. M., & Marshall, A. M. (2024, June). Coupled centrifuge-numerical modelling of shallow strip foundations. Paper presented at IS-Macau 2024: 11th International Symposium of Geotechnical Aspects of Underground Construction in Soft Ground, Macau, SOR, China

Hybrid modelling within geotechnical centrifuge tests is capable of combining the advantages of centrifuge models (providing soil stress/deformation data) with those of numerical models (capturing structural details along with associated load distrib... Read More about Coupled centrifuge-numerical modelling of shallow strip foundations.

How does explainability affect perceived transparency, trust, acceptance and usefulness? (2024)
Conference Proceeding
Ding, Y., & Hermawati, S. (2024). How does explainability affect perceived transparency, trust, acceptance and usefulness?.

The effects of explainability on perceived trust, transparency, acceptance and usefulness were explored in a within subjects study (n=15) using an online shopping recommender system as a context. The study investigated three levels of explainability... Read More about How does explainability affect perceived transparency, trust, acceptance and usefulness?.

Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient (2024)
Journal Article
Rivers, G., Lion, A., Rofiqoh Eviana Putri, N., Rance, G., Moloney, C., Taresco, V., …He, Y. (in press). Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient. Materials Today Advances,

Additive manufacturing offers manufacture of personalised pharmaceutical tablets through design freedoms and material deposition control at an individual voxel level. This control goes beyond geometry and materials choices: inkjet based 3D printing e... Read More about Enabling High-fidelity Personalized Pharmaceutical Tablets through Multimaterial Inkjet 3D Printing with a Water-soluble Excipient.

Model refinements with experimental validation in piezoelectric plate actuators (2024)
Journal Article
Popov, A., Gungordu, B., & Jabbal, M. (in press). Model refinements with experimental validation in piezoelectric plate actuators. Journal of Sound and Vibration, Article 118462. https://doi.org/10.1016/j.jsv.2024.118462

The axisymmetric vibration analysis of circular plates with piezoelectric layers and step changes in plate thickness is conducted. For the chosen configurations, it is necessary to solve a coupled system of differential equations for extensional and... Read More about Model refinements with experimental validation in piezoelectric plate actuators.

A review of techno-economic analyses and life cycle greenhouse gas emissions of biomass-to-hydrocarbon “drop-in” fuels (2024)
Journal Article
Lilonfe, S., Davies, B., Abdul-Manan, A. F., Dimitriou, I., & McKechnie, J. (2024). A review of techno-economic analyses and life cycle greenhouse gas emissions of biomass-to-hydrocarbon “drop-in” fuels. Sustainable Production and Consumption, 47, 425-444. https://doi.org/10.1016/j.spc.2024.04.016

Synthetic “drop-in” fuels are compatible with existing fuel and vehicle infrastructures and, when produced sustainably, they could play an important role in mitigating the emissions of greenhouse gases (GHG) from transportation, especially in the har... Read More about A review of techno-economic analyses and life cycle greenhouse gas emissions of biomass-to-hydrocarbon “drop-in” fuels.

A machine learning-driven approach to predicting thermo-elasto-hydrodynamic lubrication in journal bearings (2024)
Journal Article
Cartwright, S., Rothwell, B., Figueredo, G., Medina, H., Eastwick, C., Layton, J., & Ambrose, S. (2024). A machine learning-driven approach to predicting thermo-elasto-hydrodynamic lubrication in journal bearings. Tribology International, https://doi.org/10.1016/j.triboint.2024.109670

Traditional methods of evaluating the performance of journal bearings, for example thermal-elastic-hydrodynamic- lubrication theory, are limited to simplified conditions that often fail to accurately model real-world components. Numerical models that... Read More about A machine learning-driven approach to predicting thermo-elasto-hydrodynamic lubrication in journal bearings.

From scrap metal to highly efficient electrodes: harnessing the nanotextured surface of swarf for effective utilisation of Pt and Co for hydrogen production (2024)
Journal Article
Thangamuthu, M., Kohlrausch, E., Li, M., Speidel, A., Clare, A. T., Plummer, R., …Alves Fernandes, J. (2024). From scrap metal to highly efficient electrodes: harnessing the nanotextured surface of swarf for effective utilisation of Pt and Co for hydrogen production. Journal of Materials Chemistry A, https://doi.org/10.1039/d4ta00711e

Hydrogen is considered to be the key element to achieving climate neutrality, leading to a massive demand for electrocatalysts. This work explores the transformation of metal waste into active and stable electrode materials for water splitting by mod... Read More about From scrap metal to highly efficient electrodes: harnessing the nanotextured surface of swarf for effective utilisation of Pt and Co for hydrogen production.

Response of framed buildings on separate footings to tunnelling: a hybrid modelling study (2024)
Conference Proceeding
Spaggiari, C., Tang, C., Boldini, D., & Marshall, A. M. (in press). Response of framed buildings on separate footings to tunnelling: a hybrid modelling study. In Proceedings of the 5th ECPMG 2024

Within the framework of hybrid geotechnical modelling, the coupled centrifuge-numerical modelling (CCNM) technique, developed at the University of Nottingham Centre for Geomechanics (NCG), is becoming a well-established approach to study the interact... Read More about Response of framed buildings on separate footings to tunnelling: a hybrid modelling study.

Label-free Brillouin endo-microscopy for the quantitative 3D imaging of sub-micrometre biology (2024)
Journal Article
La Cavera, S., Chauhan, V. M., Hardiman, W., Yao, M., Fuentes-Domínguez, R., Setchfield, K., …Clark, M. (2024). Label-free Brillouin endo-microscopy for the quantitative 3D imaging of sub-micrometre biology. Communications Biology, 7(1), Article 451. https://doi.org/10.1038/s42003-024-06126-4

This report presents an optical fibre-based endo-microscopic imaging tool that simultaneously measures the topographic profile and 3D viscoelastic properties of biological specimens through the phenomenon of time-resolved Brillouin scattering. This u... Read More about Label-free Brillouin endo-microscopy for the quantitative 3D imaging of sub-micrometre biology.

Comparison of Fourier optics-based methods for modeling coherence scanning interferometry (2024)
Journal Article
Hooshmand, H., Pahl, T., de Groot, P. J., Lehmann, P., Pappas, A., Su, R., …Piano, S. (2024). Comparison of Fourier optics-based methods for modeling coherence scanning interferometry. Optical Engineering, 63(04), https://doi.org/10.1117/1.oe.63.4.044102

Coherence scanning interferometry (CSI) is a widely used optical method for surface topography measurement of industrial and biomedical surfaces. The operation of CSI can be modeled using approximate physics-based approaches with minimal computationa... Read More about Comparison of Fourier optics-based methods for modeling coherence scanning interferometry.

A facile one step route that introduces functionality to polymer powders for laser sintering (2024)
Journal Article
Krumins, E., Crawford, L. A., Rogers, D. M., Machado, F., Taresco, V., East, M., …Howdle, S. M. (2024). A facile one step route that introduces functionality to polymer powders for laser sintering. Nature Communications, 15(1), Article 3137. https://doi.org/10.1038/s41467-024-47376-4

Laser Sintering (LS) is a type of Additive Manufacturing (AM) exploiting laser processing of polymeric particles to produce 3D objects. Because of its ease of processability and thermo-physical properties, polyamide-12 (PA-12) represents ~95% of the... Read More about A facile one step route that introduces functionality to polymer powders for laser sintering.

Towards sustainable urban living: A holistic energy strategy for electric vehicle and heat pump adoption in residential communities (2024)
Journal Article
Dik, A., Kutlu, C., Sun, H., Calautit, J. K., Boukhanouf, R., & Omer, S. (2024). Towards sustainable urban living: A holistic energy strategy for electric vehicle and heat pump adoption in residential communities. Sustainable Cities and Society, 107, Article 105412. https://doi.org/10.1016/j.scs.2024.105412

Electric vehicles (EVs) and heat pumps (HPs) are key in reducing carbon emissions from transportation and domestic heating, yet their adoption may increase peak load demands on electrical networks. One of the aims of this research is to assess the po... Read More about Towards sustainable urban living: A holistic energy strategy for electric vehicle and heat pump adoption in residential communities.

Defining human-centricity in Industry 5.0 and assessing the readiness of Ergonomics/Human Factors communities in UK (2024)
Journal Article
Hermawati, S., Correa, R., Mohan, M., Lawson, G., & Houghton, R. (in press). Defining human-centricity in Industry 5.0 and assessing the readiness of Ergonomics/Human Factors communities in UK. Ergonomics,

There is a lack of a clear and consistent definition of human-centricity in Industry 5.0. This study identified the definition of human-centricity in Industry 5.0 through a systematic literature review and used it to assess the readiness of Ergonomic... Read More about Defining human-centricity in Industry 5.0 and assessing the readiness of Ergonomics/Human Factors communities in UK.

Investigating Levels of Remote Operation in High-level On-Road Autonomous Vehicles using Operator Sequence Diagrams (2024)
Journal Article
Parr, H., Harvey, C., Burnett, G., & Sharples, S. (in press). Investigating Levels of Remote Operation in High-level On-Road Autonomous Vehicles using Operator Sequence Diagrams. Cognition, Technology and Work, https://doi.org/10.1007/s10111-024-00762-w

The continuing development of autonomous vehicle technology is making the presence of fully autonomous vehicles (SAE Level 5 of Driving Automation) on the road an ever more likely possibility. Similarly, regulation changes show countries are preparin... Read More about Investigating Levels of Remote Operation in High-level On-Road Autonomous Vehicles using Operator Sequence Diagrams.

Unlocking the Dual Helical Ribbon for rotational viscosity measurements of highly heterogeneous fluids (2024)
Journal Article
Giancontieri, G., Hargreaves, D., Partal, P., & Lo Presti, D. (2024). Unlocking the Dual Helical Ribbon for rotational viscosity measurements of highly heterogeneous fluids. Materials and Design, 241, Article 112920. https://doi.org/10.1016/j.matdes.2024.112920

Road bituminous binders are becoming more complex since, to enhance properties and/or engineer circular economy, the conventional binder is enriched with modifiers of different nature giving birth to a final-product recognisable as highly heterogeneo... Read More about Unlocking the Dual Helical Ribbon for rotational viscosity measurements of highly heterogeneous fluids.

Improved Numerical Estimation Method for Surface Wave Attenuation on Metasurfaces (2024)
Journal Article
Suzuki, K., Dang, P. T., Homma, H., Fathnan, A. A., Phang, S., & Wakatsuchi, H. (2024). Improved Numerical Estimation Method for Surface Wave Attenuation on Metasurfaces. Advanced Theory and Simulations, https://doi.org/10.1002/adts.202301173

Comprehensive numerical tools to investigate and analyze the surface wave attenuation on a metasurface waveguide that consists of periodic patches deposited on a dielectric substrate are presented. The surface wave attenuation is evaluated in both wa... Read More about Improved Numerical Estimation Method for Surface Wave Attenuation on Metasurfaces.

Load transfer mechanisms for capped and uncapped non-displacement piles above tunnels: a centrifuge modelling study (2024)
Journal Article
Tang, C., Franza, A., Xu, J., & Marshall, A. M. (2024). Load transfer mechanisms for capped and uncapped non-displacement piles above tunnels: a centrifuge modelling study. Géotechnique, https://doi.org/10.1680/jgeot.23.00201

This paper presents results from geotechnical centrifuge tests of tunnelling in dry dense sand beneath loaded non-displacement piles, focusing on the effect of a pile cap (representative also of a raft or grade beam) in contact with the soil surface... Read More about Load transfer mechanisms for capped and uncapped non-displacement piles above tunnels: a centrifuge modelling study.

The Relationship Between the Extent of Indentation and Impact Damage in Carbon-Fibre Reinforced-Plastic Composites after a Low-Velocity Impact (2024)
Journal Article
Brooks, R. A., Liu, J., Hall, Z. E., Joesbury, A. M., Harper, L. T., Liu, H., …Dear, J. P. (2024). The Relationship Between the Extent of Indentation and Impact Damage in Carbon-Fibre Reinforced-Plastic Composites after a Low-Velocity Impact. Applied Composite Materials, https://doi.org/10.1007/s10443-024-10223-2

The present paper investigates the low-velocity impact behaviour of carbon-fibre reinforced-plastic (CFRP) composite panels and the damage incurred when they are subjected to a single impact. The relationship between the depth of permanent surface in... Read More about The Relationship Between the Extent of Indentation and Impact Damage in Carbon-Fibre Reinforced-Plastic Composites after a Low-Velocity Impact.

Effect of elastic modulus on masonry buildings during tunnelling: a coupled centrifuge-numerical modelling study (2024)
Conference Proceeding
Tang, C., & Marshall, A. M. (in press). Effect of elastic modulus on masonry buildings during tunnelling: a coupled centrifuge-numerical modelling study. In Proceedings of the 5th ECPMG 2024

In this study, a novel coupled centrifuge-numerical modelling (CCNM) approach of shallow strip foundations developed at the University of Nottingham Centre for Geomechanics (NCG) is used to study the response of masonry building behaviour during tunn... Read More about Effect of elastic modulus on masonry buildings during tunnelling: a coupled centrifuge-numerical modelling study.

Scalable bioreactor production of an O2‐protected [FeFe]‐hydrogenase enables simple aerobic handling for clean chemical synthesis (2024)
Journal Article
Cleary, S. E., Hall, S. J., Galan-Bataller, R., Lurshay, T. C., Hancox, C., Williamson, J. J., …Morra, S. (in press). Scalable bioreactor production of an O2‐protected [FeFe]‐hydrogenase enables simple aerobic handling for clean chemical synthesis. ChemCatChem, https://doi.org/10.1002/cctc.202400193

The enzyme CbA5H, a [FeFe]‐hydrogenase fromClostridium beijerinckii, has previously been shown to surviveexposure to oxygen, making it a promising candidate forbiotechnological applications. Thus far [NiFe]‐hydrogenases aretypically considered for su... Read More about Scalable bioreactor production of an O2‐protected [FeFe]‐hydrogenase enables simple aerobic handling for clean chemical synthesis.