All Outputs (4193)

Label-free Brillouin endo-microscopy for the quantitative 3D imaging of sub-micrometre biology (2024)
Journal Article
La Cavera III, S., Chauhan, V. M., Hardiman, W., Yao, M., Fuentes-Domínguez, R., Setchfield, K., …Clark, M. (2024). Label-free Brillouin endo-microscopy for the quantitative 3D imaging of sub-micrometre biology. Communications Biology, 7, Article 451. https://doi.org/10.1038/s42003-024-06126-4

This report presents an optical fibre-based endo-microscopic imaging tool that simultaneously measures the topographic profile and 3D viscoelastic properties of biological specimens through the phenomenon of time-resolved Brillouin scattering. This u... Read More about Label-free Brillouin endo-microscopy for the quantitative 3D imaging of sub-micrometre biology.

Defining human-centricity in Industry 5.0 and assessing the readiness of Ergonomics/Human Factors communities in UK (2024)
Journal Article
Hermawati, S., Correa, R., Mohan, M., Lawson, G., & Houghton, R. (in press). Defining human-centricity in Industry 5.0 and assessing the readiness of Ergonomics/Human Factors communities in UK. Ergonomics,

There is a lack of a clear and consistent definition of human-centricity in Industry 5.0. This study identified the definition of human-centricity in Industry 5.0 through a systematic literature review and used it to assess the readiness of Ergonomic... Read More about Defining human-centricity in Industry 5.0 and assessing the readiness of Ergonomics/Human Factors communities in UK.

Unlocking the Dual Helical Ribbon for rotational viscosity measurements of highly heterogeneous fluids (2024)
Journal Article
Giancontieri, G., Hargreaves, D., Partal, P., & Lo Presti, D. (in press). Unlocking the Dual Helical Ribbon for rotational viscosity measurements of highly heterogeneous fluids. Materials and Design, Article 112920. https://doi.org/10.1016/j.matdes.2024.112920

Road bituminous binders are becoming more complex since, to enhance properties and/or engineer circular economy, the conventional binder is enriched with modifiers of different nature giving birth to a final-product recognisable as highly heterogeneo... Read More about Unlocking the Dual Helical Ribbon for rotational viscosity measurements of highly heterogeneous fluids.

Load transfer mechanisms for capped and uncapped non-displacement piles above tunnels: a centrifuge modelling study (2024)
Journal Article
Tang, C., Franza, A., Xu, J., & Marshall, A. M. (2024). Load transfer mechanisms for capped and uncapped non-displacement piles above tunnels: a centrifuge modelling study. Géotechnique, https://doi.org/10.1680/jgeot.23.00201

This paper presents results from geotechnical centrifuge tests of tunnelling in dry dense sand beneath loaded non-displacement piles, focusing on the effect of a pile cap (representative also of a raft or grade beam) in contact with the soil surface... Read More about Load transfer mechanisms for capped and uncapped non-displacement piles above tunnels: a centrifuge modelling study.

Improved Numerical Estimation Method for Surface Wave Attenuation on Metasurfaces (2024)
Journal Article
Suzuki, K., Dang, P. T., Homma, H., Fathnan, A. A., Phang, S., & Wakatsuchi, H. (2024). Improved Numerical Estimation Method for Surface Wave Attenuation on Metasurfaces. Advanced Theory and Simulations, https://doi.org/10.1002/adts.202301173

Comprehensive numerical tools to investigate and analyze the surface wave attenuation on a metasurface waveguide that consists of periodic patches deposited on a dielectric substrate are presented. The surface wave attenuation is evaluated in both wa... Read More about Improved Numerical Estimation Method for Surface Wave Attenuation on Metasurfaces.

The Relationship Between the Extent of Indentation and Impact Damage in Carbon-Fibre Reinforced-Plastic Composites after a Low-Velocity Impact (2024)
Journal Article
Brooks, R., Liu, J., Hall, Z., Joesbury, A., Harper, L., Liu, H., …Dear, J. (2024). The Relationship Between the Extent of Indentation and Impact Damage in Carbon-Fibre Reinforced-Plastic Composites after a Low-Velocity Impact. Applied Composite Materials, https://doi.org/10.1007/s10443-024-10223-2

The present paper investigates the low-velocity impact behaviour of carbon-fibre reinforced-plastic (CFRP) composite panels and the damage incurred when they are subjected to a single impact. The relationship between the depth of permanent surface in... Read More about The Relationship Between the Extent of Indentation and Impact Damage in Carbon-Fibre Reinforced-Plastic Composites after a Low-Velocity Impact.

Comparison of Fourier optics-based methods for modeling coherence scanning interferometry (2024)
Journal Article
Hooshmand, H., Pahl, T., de Groot, P. J., Lehmann, P., Pappas, A., Su, R., …Piano, S. (in press). Comparison of Fourier optics-based methods for modeling coherence scanning interferometry. Optical Engineering,

Coherence scanning interferometry (CSI) is a widely used optical method for surface topography measurement of industrial and biomedical surfaces. The operation of CSI can be modeled using approximate physics-based approaches with minimal computationa... Read More about Comparison of Fourier optics-based methods for modeling coherence scanning interferometry.

Driving next generation manufacturing through advanced metals characterisation capability (2024)
Journal Article
Clare, A., Seita, M., Speidel, A., Collins, P., & Clark, M. (2024). Driving next generation manufacturing through advanced metals characterisation capability. Scripta Materialia, 246, Article 116009. https://doi.org/10.1016/j.scriptamat.2024.116009

Understanding the effects of manufacturing methods upon materials has driven constant innovation for over 300 years. While our ability to fabricate metallurgical wonders extends into the annals of history our ability to understand the scientific prin... Read More about Driving next generation manufacturing through advanced metals characterisation capability.

A study of membrane correction accounting for both curvature and tension in DEM simulations of triaxial tests of sand and ballast with two alternative flexible membrane models (2024)
Journal Article
Tolomeo, M., & McDowell, G. R. (2024). A study of membrane correction accounting for both curvature and tension in DEM simulations of triaxial tests of sand and ballast with two alternative flexible membrane models. Granular Matter, 26(2), Article 47. https://doi.org/10.1007/s10035-024-01419-1

In DEM simulations of triaxial tests, modelling a flexible lateral membrane is crucial and challenging. It is essential for the correct application of a uniform lateral pressure and for an accurate measurement of sample volume. Here, we introduce a m... Read More about A study of membrane correction accounting for both curvature and tension in DEM simulations of triaxial tests of sand and ballast with two alternative flexible membrane models.

Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma (2024)
Journal Article
Wongrakpanich, A., Bui Thi Thu, H., Sakchaisri, K., Taresco, V., Cuzzucoli Crucitti, V., Bunsupa, S., & Suksiriworapong, J. (2024). Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma. Journal of Drug Delivery Science and Technology, 95, Article 105610. https://doi.org/10.1016/j.jddst.2024.105610

This study explored the co-delivery of curcumin (CUR) and resveratrol (RV) using folic acid-conjugated poly(glycerol adipate)-based nanoparticles (FPPC NPs) to enhance their synergistic anticancer effects against osteosarcoma. Based on synergistic to... Read More about Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma.

Dicalcium ferrite: A chemical heat pump in integrated carbon capture and chemical looping combustion for the steel industry (2024)
Journal Article
Sukma, M. S., Zheng, Y., & Scott, S. A. (2024). Dicalcium ferrite: A chemical heat pump in integrated carbon capture and chemical looping combustion for the steel industry. Chemical Engineering Journal, 488, Article 150658. https://doi.org/10.1016/j.cej.2024.150658

An integrated calcium and chemical looping combustion using dicalcium ferrite (Ca2Fe2O5, C2F), a mixed phase from iron and calcium oxides, is proposed here to remove carbon (CO + CO2) contained in the blast furnace gas from the steel industry. C2F is... Read More about Dicalcium ferrite: A chemical heat pump in integrated carbon capture and chemical looping combustion for the steel industry.

Effects of embedded walls on tunnelling-induced sandy ground displacements: a numerical investigation (2024)
Journal Article
Xu, J., Zheng, L., Song, G., Zhang, D., Sheil, B., & Marshall, A. M. (2024). Effects of embedded walls on tunnelling-induced sandy ground displacements: a numerical investigation. Géotechnique, https://doi.org/10.1680/jgeot.23.00307

Urban tunnelling projects pose significant risks to the integrity of nearby structures due to ground movements induced by the excavation process. Embedded walls are commonly employed as a protective measure to mitigate these adverse effects. This pap... Read More about Effects of embedded walls on tunnelling-induced sandy ground displacements: a numerical investigation.

Design and implementation of a cost-aware and smart oyster mushroom cultivation system (2024)
Journal Article
Elewi, A., Hajhamed, A., Khankan, R., Duman, S., Souag, A., & Ahmed, A. (2024). Design and implementation of a cost-aware and smart oyster mushroom cultivation system. Smart Agricultural Technology, 8, Article 100439. https://doi.org/10.1016/j.atech.2024.100439

Mushrooms are a nutritious food source, which can play a crucial role in providing affordable sources of proteins, vitamins and minerals for people worldwide, but their cultivation requires extensive training and considerable relevant expertise in or... Read More about Design and implementation of a cost-aware and smart oyster mushroom cultivation system.

Electricity Generation under the Climate Change Situation in Latin America: Trends and Challenges (2024)
Journal Article
Undurraga, J. P., Rivera, M., Cossutta, P., Garcés, A., Ayala, M., García, L. Y., & Wheeler, P. (2024). Electricity Generation under the Climate Change Situation in Latin America: Trends and Challenges. International Journal of Energy Economics and Policy, 14(2), 535-545. https://doi.org/10.32479/ijeep.15226

In a scenario of energy inequality, countries require stability for development and quality of life for their inhabitants. This paper addresses the reality of access to electrical energy and the effect of climate change on the potential of renewables... Read More about Electricity Generation under the Climate Change Situation in Latin America: Trends and Challenges.

A novel integration of supplementary photovoltaic module into compound parabolic concentrator for accelerated defrosting of solar collecting system (2024)
Journal Article
Chang, Z., Liu, X., Guo, Z., Hou, J., & Su, Y. (2024). A novel integration of supplementary photovoltaic module into compound parabolic concentrator for accelerated defrosting of solar collecting system. Renewable Energy, 225, Article 120316. https://doi.org/10.1016/j.renene.2024.120316

In order to improve the temperature of solar greenhouse in winter and reduce the cost and energy consumption of traditional heating methods for solar greenhouse. This study presents a novel compound parabolic concentrator (CPC) coupled with a supplem... Read More about A novel integration of supplementary photovoltaic module into compound parabolic concentrator for accelerated defrosting of solar collecting system.

Interfacial Behaviors and Oil Detachment Mechanisms by Modified Silica Nanoparticles: Insights from Molecular Simulations (2024)
Journal Article
Zhou, W., Tang, X., Liu, X., Yan, Y., & Chen, C. (2024). Interfacial Behaviors and Oil Detachment Mechanisms by Modified Silica Nanoparticles: Insights from Molecular Simulations. Journal of Physical Chemistry B, https://doi.org/10.1021/acs.jpcb.3c07697

Surfactant flooding has been considered as a promising approach for chemically enhanced oil recovery (EOR). However, this technique encounters several limitations, such as high costs, environmental concerns, and reduced efficiency under high-temperat... Read More about Interfacial Behaviors and Oil Detachment Mechanisms by Modified Silica Nanoparticles: Insights from Molecular Simulations.

Pore structure-transport relationships in high-temperature shift catalyst pellets studied by integrated multiscale porosimetry and X-ray tomography (2024)
Journal Article
Mousa, S., Beech, T., Softley, E., Fletcher, R. S., Kelly, G., Viney, E., & Rigby, S. P. (2024). Pore structure-transport relationships in high-temperature shift catalyst pellets studied by integrated multiscale porosimetry and X-ray tomography. Chemical Engineering Science, 292, Article 120005. https://doi.org/10.1016/j.ces.2024.120005

Diffusion-limited, heterogeneously-catalysed processes mean choices influencing pore structure-transport relationships, made during pellet fabrication, affect product performance. This work shows how the ‘sifting strategy’ can identify the critical a... Read More about Pore structure-transport relationships in high-temperature shift catalyst pellets studied by integrated multiscale porosimetry and X-ray tomography.

How pressure affects costs of power conversion machinery in compressed air energy storage; part II: Heat exchangers (2024)
Journal Article
Baniamerian, Z., Garvey, S., Rouse, J., Cárdenas, B., Pottie, D. L., Barbour, E. R., & Bagdanavicius, A. (2024). How pressure affects costs of power conversion machinery in compressed air energy storage; part II: Heat exchangers. Journal of Energy Storage, 86(Pt A), Article 111138. https://doi.org/10.1016/j.est.2024.111138

In the field of compressed air energy storage, a critical economic aspect that has been overlooked in existing literature relates to the influence of storage pressure on the capital cost of power conversion system. In Part I, a comprehensive study wa... Read More about How pressure affects costs of power conversion machinery in compressed air energy storage; part II: Heat exchangers.

Emerging Molten Salts Based Electrochemical Energy Technologies (2024)
Journal Article
Yu, Y., Zhang, Y., Wang, H., & Chen, G. Z. (2024). Emerging Molten Salts Based Electrochemical Energy Technologies. Electrochemistry, Article 24-69009. https://doi.org/10.5796/electrochemistry.24-69009

Molten salts of inorganic nature are excellent reaction media for various research and industrial uses. Their applications in energy technologies are also wide, including, but not limited to, thermal, nuclear, and electrochemical processes and their... Read More about Emerging Molten Salts Based Electrochemical Energy Technologies.

A sustainable bioprocess to produce bacterial cellulose (BC) using waste streams from wine distilleries and the biodiesel industry: evaluation of BC for adsorption of phenolic compounds, dyes and metals (2024)
Journal Article
Tsouko, E., Pilafidis, S., Kourmentza, K., Gomes, H. I., Sarris, G., Koralli, P., …Sarris, D. (2024). A sustainable bioprocess to produce bacterial cellulose (BC) using waste streams from wine distilleries and the biodiesel industry: evaluation of BC for adsorption of phenolic compounds, dyes and metals. Biotechnology for Biofuels and Bioproducts, 17(1), Article 40. https://doi.org/10.1186/s13068-024-02488-3

Background The main challenge for large-scale production of bacterial cellulose (BC) includes high production costs interlinked with raw materials, and low production rates. The valorization of renewable nutrient sources could improve the economic e... Read More about A sustainable bioprocess to produce bacterial cellulose (BC) using waste streams from wine distilleries and the biodiesel industry: evaluation of BC for adsorption of phenolic compounds, dyes and metals.