Skip to main content

Research Repository

Advanced Search

All Outputs (39)

Chlorine Fixing Ability of Electric Arc Furnace Dust During the Thermal Degradation of Polyvinyl Chloride under Oxidative Conditions (2023)
Journal Article
Al-Harahsheh, M., Altarawneh, S., Al-Omari, M., Altarawneh, M., Kingman, S., & Dodds, C. (2023). Chlorine Fixing Ability of Electric Arc Furnace Dust During the Thermal Degradation of Polyvinyl Chloride under Oxidative Conditions. Jordanian Journal of Engineering and Chemical Industries, 6(3), 39-46. https://doi.org/10.48103/jjeci672023

Electric arc furnace dust (EAFD) and polyvinyl chloride (PVC) are two hazardous wastes that are accumulated world-wide at an alarming rate. Utilising these two wastes simultaneously towards a sustainable recycling loop can greatly mitigate their envi... Read More about Chlorine Fixing Ability of Electric Arc Furnace Dust During the Thermal Degradation of Polyvinyl Chloride under Oxidative Conditions.

A thermo-kinetic investigation on the thermal degradation of polyvinyl chloride in the presence of magnetite and hematite (2022)
Journal Article
Altarawneh, S., Al-Harahsheh, M., Buttress, A., Dodds, C., & Kingman, S. (2022). A thermo-kinetic investigation on the thermal degradation of polyvinyl chloride in the presence of magnetite and hematite. Thermochimica Acta, 718, Article 179390. https://doi.org/10.1016/j.tca.2022.179390

Electric arc furnace dust (EAFD) which is accumulated in large amounts world-wide contains hematite (Fe2O3) and significant quantities of magnetite (Fe3O4). Waste polyvinyl chloride (PVC) also poses a great environmental threat aside to accumulated E... Read More about A thermo-kinetic investigation on the thermal degradation of polyvinyl chloride in the presence of magnetite and hematite.

Thermodynamic, pyrolytic, and kinetic investigation on the thermal decomposition of polyvinyl chloride in the presence of franklinite (2022)
Journal Article
Altarawneh, S., Al-Harahsheh, M., Dodds, C., Buttress, A., & Kingman, S. (2022). Thermodynamic, pyrolytic, and kinetic investigation on the thermal decomposition of polyvinyl chloride in the presence of franklinite. Process Safety and Environmental Protection, 168, 558-569. https://doi.org/10.1016/j.psep.2022.10.028

Thermal co-treatment of Electric Arc Furnace Dust (EAFD) and polyvinyl chloride (PVC) may provide a viable route for reprocessing these hazardous materials within the circular economy. To develop and optimise a commercial treatment process, the compl... Read More about Thermodynamic, pyrolytic, and kinetic investigation on the thermal decomposition of polyvinyl chloride in the presence of franklinite.

S-band elliptical–cylindrical cavity resonator for material processing (2022)
Journal Article
Rodriguez, J., Ampuero, J., Valderrama, W., Buttress, A., Dodds, C., Kingman, S., & Carrasco, H. (2022). S-band elliptical–cylindrical cavity resonator for material processing. Microwave and Optical Technology Letters, 64(12), 2160-2164. https://doi.org/10.1002/mop.33431

The development of an elliptical–cylindrical cavity for microwave thermal processing of materials at high electric field strengths is reported. The design methodology based on numerical modeling is validated by experimental measurements. The system c... Read More about S-band elliptical–cylindrical cavity resonator for material processing.

Thermal degradation kinetics of polyvinyl chloride in presence of zinc oxide (2021)
Journal Article
Altarawneh, S., Al-Harahsheh, M., Dodds, C., Buttress, A., & Kingman, S. (2022). Thermal degradation kinetics of polyvinyl chloride in presence of zinc oxide. Thermochimica Acta, 707, Article 179105. https://doi.org/10.1016/j.tca.2021.179105

This work investigates the degradation kinetics and the pyrolysis behavior of Poly (vinyl chloride) (PVC) and its mixture with ZnO using thermogravimetric analysis under an inert atmosphere. The investigation was carried out due to the increased inte... Read More about Thermal degradation kinetics of polyvinyl chloride in presence of zinc oxide.

Leaching behavior of zinc and lead from electric arc furnace dust – Poly(vinyl) chloride residues after oxidative thermal treatment (2021)
Journal Article
Al-Harahsheh, M., Altarawneh, S., Al-Omari, M., Altarawneh, M., Kingman, S., & Dodds, C. (2021). Leaching behavior of zinc and lead from electric arc furnace dust – Poly(vinyl) chloride residues after oxidative thermal treatment. Journal of Cleaner Production, 328, Article 129622. https://doi.org/10.1016/j.jclepro.2021.129622

Oxidative thermal treatment of electric arc furnace dust (EAFD) mixed with poly(vinyl) chloride (PVC) was carried out to study the impact of oxidizing environment on the extraction of valuable metals. The effect of oxygen partial pressure, temperatur... Read More about Leaching behavior of zinc and lead from electric arc furnace dust – Poly(vinyl) chloride residues after oxidative thermal treatment.

Microwave selective heating of electric arc furnace dust constituents toward sustainable recycling: Contribution of electric and magnetic fields (2021)
Journal Article
Altarawneh, S., Al-Harahsheh, M., Buttress, A., Dodds, C., Rodriguez, J., & Kingman, S. (2021). Microwave selective heating of electric arc furnace dust constituents toward sustainable recycling: Contribution of electric and magnetic fields. Journal of Industrial and Engineering Chemistry, 104, 521-528. https://doi.org/10.1016/j.jiec.2021.09.001

Microwave heating of waste electric arc furnace dust (EAFD) for the purpose of its remediation has been studied extensively. However, these studies considered EAFD as a bulk material without addressing either the relative response of its individual c... Read More about Microwave selective heating of electric arc furnace dust constituents toward sustainable recycling: Contribution of electric and magnetic fields.

Microwave digestion of gibbsite and bauxite in sodium hydroxide (2020)
Journal Article
Dillinger, B., Batchelor, A., Katrib, J., Dodds, C., Suchicital, C., Kingman, S., & Clark, D. (2020). Microwave digestion of gibbsite and bauxite in sodium hydroxide. Hydrometallurgy, 192, Article 105257. https://doi.org/10.1016/j.hydromet.2020.105257

It was hypothesized that bauxite digestion may be improved by using microwave heating as it has been shown in literature that some material processes have improved efficiency. To test this hypothesis, a set of digestion experiments were conducted usi... Read More about Microwave digestion of gibbsite and bauxite in sodium hydroxide.

Methodology for the synthesis of methacrylate monomers using designed single mode microwave applicators (2019)
Journal Article
Dundas, A. A., Hook, A. L., Alexander, M. R., Kingman, S. W., Dimitrakis, G., & Irvine, D. J. (2019). Methodology for the synthesis of methacrylate monomers using designed single mode microwave applicators. Reaction Chemistry and Engineering, 4(8), 1472-1476. https://doi.org/10.1039/c9re00173e

© 2019 The Royal Society of Chemistry. A novel single-well prototype high throughput microwave reactor geometry has been produced and shown to be capable of synthesizing an array of non-commercially available methacrylate monomers. The reactor, which... Read More about Methodology for the synthesis of methacrylate monomers using designed single mode microwave applicators.

Formation of Metallurgical Coke within Minutes through Coal Densification and Microwave Energy (2019)
Journal Article
Williams, O., Ure, A., Stevens, L., Binner, E., Dodds, C., Kingman, S., …Lester, E. (2019). Formation of Metallurgical Coke within Minutes through Coal Densification and Microwave Energy. Energy and Fuels, 33(7), 6817-6828. https://doi.org/10.1021/acs.energyfuels.9b00511

This paper shows how feedstock densification gives rise to a step change in the time required to create a metallurgical grade coke using microwave energy. Five densified coking and non-coking coals were heated in a multi-mode microwave 2450 MHz cavit... Read More about Formation of Metallurgical Coke within Minutes through Coal Densification and Microwave Energy.

Predicting the Behaviour of Near-Critical and Supercritical Alcohols at Microwave Frequencies: Validation of Molecular Dynamic Simulations as a Tool that can Substitute for Measurements under Extreme Experimental Conditions (2019)
Journal Article
Robinson, D., Irvine, D. J., Robinson, J. P., Lester, E. H., Kingman, S. W., & Dimitrakis, G. (2019). Predicting the Behaviour of Near-Critical and Supercritical Alcohols at Microwave Frequencies: Validation of Molecular Dynamic Simulations as a Tool that can Substitute for Measurements under Extreme Experimental Conditions. Journal of Supercritical Fluids, 146, 165-171. https://doi.org/10.1016/j.supflu.2019.01.018

Equilibrium and non-equilibrium molecular dynamic simulations, predicting the dielectric properties of near-critical and supercritical methanol and ethanol at microwave frequencies have been carried out. The autocorrelation functions of the dielectri... Read More about Predicting the Behaviour of Near-Critical and Supercritical Alcohols at Microwave Frequencies: Validation of Molecular Dynamic Simulations as a Tool that can Substitute for Measurements under Extreme Experimental Conditions.

Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment (2018)
Journal Article
Buttress, A., Rodriguez, J., Ure, A., Ferrari, R., Dodds, C., & Kingman, S. (2019). Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment. Minerals Engineering, 131, 407-419. https://doi.org/10.1016/j.mineng.2018.11.025

© 2018 Demand for high purity silica used in component manufacture is set to outstrip current supply in the near future. As such, alternative processing routes to feed-stock materials suitable for use in lighting and solar cell fabrication are requir... Read More about Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment.

Microwave pyrolysis of pecan nut shell and thermogravimetric, textural and spectroscopic characterization of carbonaceous products (2018)
Journal Article
Durán-Jiménez, G., Hernández-Montoya, V., Montes-Morán, M., Kingman, S., Monti, T., & Binner, E. (2018). Microwave pyrolysis of pecan nut shell and thermogravimetric, textural and spectroscopic characterization of carbonaceous products. Journal of Analytical and Applied Pyrolysis, 135, 160-168. https://doi.org/10.1016/j.jaap.2018.09.007

In the present work, the pyrolysis of pecan nut shell was studied using microwave technology at different input power and exposure time. The carbonaceous products were characterized using elemental analysis, potentiometric titration, thermogravimetri... Read More about Microwave pyrolysis of pecan nut shell and thermogravimetric, textural and spectroscopic characterization of carbonaceous products.

Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications (2018)
Journal Article
Williams, O., Taylor, S., Lester, E., Kingman, S., Giddings, D., & Eastwick, C. (2018). Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications. Materials, 11(8), https://doi.org/10.3390/ma11081329

In this paper, the applicability of mechanical tests for biomass pellet characterisation was investigated. Pellet durability, quasi-static (low strain rate), and dynamic (high strain rate) mechanical tests were applied to mixed wood, eucalyptus, sunf... Read More about Applicability of mechanical tests for biomass pellet characterisation for bioenergy applications.

Realising the environmental benefits of metal–organic frameworks: recent advances in microwave synthesis (2018)
Journal Article
Thomas-Hillman, I., Laybourn, A., Dodds, C., & Kingman, S. W. (in press). Realising the environmental benefits of metal–organic frameworks: recent advances in microwave synthesis. Journal of Materials Chemistry A, https://doi.org/10.1039/c8ta02919a

Metal–organic frameworks (MOFs) are a broad class of porous crystalline materials that show great potential for a wide-range of applications in areas such as energy and environmental sustainability. MOFscan show significant advantages in gas selectiv... Read More about Realising the environmental benefits of metal–organic frameworks: recent advances in microwave synthesis.

Thermal analysis on the pyrolysis of tetrabromobisphenol A (TBBPA) and Electric Arc Furnace Dust mixtures (2017)
Journal Article
Al-Harahsheh, M., Al-Otoom, A., Al-Jarrah, M., Altarawneh, M., & Kingman, S. (in press). Thermal analysis on the pyrolysis of tetrabromobisphenol A (TBBPA) and Electric Arc Furnace Dust mixtures. Metallurgical and Materials Transactions B, 49(1), https://doi.org/10.1007/s11663-017-1121-7

The pyrolysis of Tetrabromobisphenol A (TBBPA) mixed with Electric Arc Furnace Dust (EAFD) was studied using thermogravimetric analysis (TGA) and theoretically analysed using thermodynamic equilibrium calculations. Mixtures of both materials with var... Read More about Thermal analysis on the pyrolysis of tetrabromobisphenol A (TBBPA) and Electric Arc Furnace Dust mixtures.

Microwave treatment of electric arc furnace dust with Tetrabromobisphenol A: Dielectric characterization and pyrolysis-leaching (2017)
Journal Article
Al-Harahsheh, M., Kingman, S., & Hamilton, I. S. (2017). Microwave treatment of electric arc furnace dust with Tetrabromobisphenol A: Dielectric characterization and pyrolysis-leaching. Journal of Analytical and Applied Pyrolysis, 128, https://doi.org/10.1016/j.jaap.2017.10.013

In the present work microwave treatment of electric arc furnace dust (EAFD) mixed with tetrabromobisphenol A (TBBPA) was investigated. A range of characterization techniques were used to understand the thermal behaviour of TBBPA-EAFD mixtures under m... Read More about Microwave treatment of electric arc furnace dust with Tetrabromobisphenol A: Dielectric characterization and pyrolysis-leaching.

Benefits of dry comminution of biomass pellets in a knife mill (2017)
Journal Article
Williams, O., Lester, E., Kingman, S., Giddings, D., Lormor, S., & Eastwick, C. (in press). Benefits of dry comminution of biomass pellets in a knife mill. Biosystems Engineering, 160, https://doi.org/10.1016/j.biosystemseng.2017.05.011

The potential benefits of dry comminution in a knife mill for a diverse range of biomass 6 pellets are explored. The impact of dry comminution on energy consumption, particle size and shape, 7 is examined as well as the link between milling and mecha... Read More about Benefits of dry comminution of biomass pellets in a knife mill.

Microwave fluidized bed for biomass pyrolysis. Part II: Effect of process parameters (2017)
Journal Article
Adam, M., Beneroso, D., Katrib, J., Kingman, S., & Robinson, J. P. (in press). Microwave fluidized bed for biomass pyrolysis. Part II: Effect of process parameters. Biofuels, Bioproducts and Biorefining, https://doi.org/10.1002/bbb.1781

The microwave fluidized bed process developed in Part I (DOI: 10.1002/bbb.1780), in which the heating heterogeneity issues are overcome, has been applied to the pyrolysis of biomass. The degree of pyrolysis was established by studying the behavior of... Read More about Microwave fluidized bed for biomass pyrolysis. Part II: Effect of process parameters.

Microwave fluidized bed for biomass pyrolysis. Part I: Process design (2017)
Journal Article
Adam, M., Beneroso, D., Katrib, J., Kingman, S., & Robinson, J. P. (in press). Microwave fluidized bed for biomass pyrolysis. Part I: Process design. Biofuels, Bioproducts and Biorefining, https://doi.org/10.1002/bbb.1780

The production of bio-oils from microwave pyrolysis has received increasing attention from bioenergy researchers, but no studies reported to date have proposed reliable solutions to avoid thermal runaway. The motivation of this paper is to develop an... Read More about Microwave fluidized bed for biomass pyrolysis. Part I: Process design.