Unlocking value for a circular economy through 3D printing: a research agenda

Despeisse, M.; Baumers, M.; Brown, P.; Charnley, F.; Ford, S.J.; Garmulewicz, A.; Knowles, S.; Minshall, T.H.W.; Mortara, L.; Reed-Tsochas, F.P.; Rowley, J.

doi:10.1016/j.techfore.2016.09.021

All Outputs (9)

Interactions of fast-moving consumer goods in cooking: Insights from a quantitative ethnographic study (2022)
Journal Article
Berumen, G., Fischer, J., & Baumers, M. (2023). Interactions of fast-moving consumer goods in cooking: Insights from a quantitative ethnographic study. Packaging Technology and Science, 36(4), 265-279. https://doi.org/10.1002/pts.2710

Fast-moving consumer goods (FMCGs) are increasingly equipped with enhanced packaging that incorporates novel functionalities. Providing FMCGs with this technology is challenging due to their unique characteristics, such as their low cost and short li... Read More about Interactions of fast-moving consumer goods in cooking: Insights from a quantitative ethnographic study.

Data as a Resource for Designing Digitally Enhanced Consumer Packaged Goods (2022)
Journal Article
Berumen, G., Fischer, J., & Baumers, M. (2022). Data as a Resource for Designing Digitally Enhanced Consumer Packaged Goods. Multimodal Technologies and Interaction, 6(11), Article 101. https://doi.org/10.3390/mti6110101

The incorporation of digital functionalities into consumer packaged goods (CPG) has the potential to improve our lives by supporting us in our daily practises. However, despite the increasing availability of data about their use, research is needed t... Read More about Data as a Resource for Designing Digitally Enhanced Consumer Packaged Goods.

The impact of the risk of build failure on energy consumption in additive manufacturing (2022)
Journal Article
Wang, H., Baumers, M., Basak, S., He, Y., & Ashcroft, I. (2022). The impact of the risk of build failure on energy consumption in additive manufacturing. Journal of Industrial Ecology, 26(5), 1771-1783. https://doi.org/10.1111/jiec.13318

Additive manufacturing (AM), also known as 3D printing, is associated with significant promise in the manufacturing sector. However, it has been shown that the risk of build failure has a substantial impact on the costs of AM and that this results fr... Read More about The impact of the risk of build failure on energy consumption in additive manufacturing.

A Structured Approach for Synchronising the Applications of Failure Mode and Effects Analysis (2021)
Journal Article
Alruqi, M., Baumers, M., Branson, D., & Farndon, R. (2021). A Structured Approach for Synchronising the Applications of Failure Mode and Effects Analysis. Management Systems in Production Engineering, 29(3), 165-177. https://doi.org/10.2478/mspe-2021-0021

Failure Mode and Effects Analysis (FMEA) is a systematic approach for evaluating the potential failure modes in a system, and is mainly employed in three distinct tasks labelled: (1) Functional FMEA – evaluating those failures associated with product... Read More about A Structured Approach for Synchronising the Applications of Failure Mode and Effects Analysis.

A framework for differentiation in composed digital-physical products (2020)
Journal Article
Baumers, M., Ashcroft, I., Benford, S., Flintham, M., Koleva, B., Tóth, Z., & Winklhofer, H. (2020). A framework for differentiation in composed digital-physical products. International Journal of Mechatronics and Manufacturing Systems, 13(4), 286-298. https://doi.org/10.1504/IJMMS.2020.112351

Product-service systems (PSS) composed of physical products and digital services are emerging as an important new product category. In this paper we suggest that the established metaphor of 'layering' is insufficient to capture the diverse ways in wh... Read More about A framework for differentiation in composed digital-physical products.

To kit or not to kit: analysing the value of model-based kitting for additive manufacturing (2018)
Journal Article
Khajavi, S. H., Baumers, M., Holmström, J., Özcan, E., Atkin, J., Jackson, W. G., & Li, W. (2018). To kit or not to kit: analysing the value of model-based kitting for additive manufacturing. Computers in Industry, 98, https://doi.org/10.1016/j.compind.2018.01.022

The use of additive manufacturing (AM) for the production of functional parts is increasing. Thus, AM based practices that can reduce supply chain costs gain in importance. We take a forward-looking approach and study how AM can be used more effectiv... Read More about To kit or not to kit: analysing the value of model-based kitting for additive manufacturing.

Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation (2017)
Journal Article
Baumers, M., Beltrametti, L., Gasparre, A., & Hague, R. (in press). Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation. International Journal of Production Research, 55(23), https://doi.org/10.1080/00207543.2017.1334978

Informing Additive Manufacturing (AM) technology adoption decisions, this paper investigates the relationship between build volume capacity utilisation and efficient technology operation in an inter-process comparison of the costs of manufacturing a... Read More about Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation.

Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate? (2016)
Journal Article
Faludi, J., Baumers, M., Maskery, I., & Hague, R. (2017). Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate?. Journal of Industrial Ecology, 21(S1), S144-S156. https://doi.org/10.1111/jiec.12528

© 2016 The Authors. Journal of Industrial Ecology, published by Wiley Periodicals, Inc., on behalf of Yale University. This life cycle assessment measured environmental impacts of selective laser melting, to determine where most impacts arise: machin... Read More about Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate?.

Unlocking value for a circular economy through 3D printing: a research agenda (2016)
Journal Article
Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S., Garmulewicz, A., …Rowley, J. (2017). Unlocking value for a circular economy through 3D printing: a research agenda. Technological Forecasting and Social Change, 115, 75-84. https://doi.org/10.1016/j.techfore.2016.09.021

The circular economy (CE) aims to radically improve resource efficiency by eliminating the concept of waste and leading to a shift away from the linear take-make-waste model. In a CE, resources are flowing in a circular manner either in a biocycle (b... Read More about Unlocking value for a circular economy through 3D printing: a research agenda.