All Outputs (23)

Synergy of nanocrystalline carbon nitride with Cu single atom catalyst leads to selective photocatalytic reduction of CO2 to methanol (2024)
Journal Article
LeMercier, T. M., Thangamuthu, M., Kohlrausch, E. C., Chen, Y., Stoppiello, C. T., Fay, M. W., …Khlobystov, A. N. (2024). Synergy of nanocrystalline carbon nitride with Cu single atom catalyst leads to selective photocatalytic reduction of CO2 to methanol. Sustainable Energy and Fuels, https://doi.org/10.1039/D4SE00028E

Carbon nitride (C3N4) possesses both a band gap in the visible range and a low-lying conduction band potential, suitable for water splitting and CO2 reduction reactions (CO2RR). Yet, bulk C3N4 (b-C3N4) suffers from structural disorder leading to slug... Read More about Synergy of nanocrystalline carbon nitride with Cu single atom catalyst leads to selective photocatalytic reduction of CO2 to methanol.

Rapid synthesis of magnetic microspheres and the development of new macro-micro hierarchically porous magnetic framework composites (2023)
Journal Article
Woodliffe, J. L., Molinar-Díaz, J., Islam, M. T., Stevens, L. A., Wadge, M. D., Rance, G. A., …Laybourn, A. (2023). Rapid synthesis of magnetic microspheres and the development of new macro-micro hierarchically porous magnetic framework composites. Journal of Materials Chemistry A, 11(27), 14705-14719. https://doi.org/10.1039/D3TA01927F

Magnetic framework composites (MFCs) are a highly interesting group of materials that contain both metal–organic frameworks (MOFs) and magnetic materials. Combining the unique benefits of MOFs (tuneable natures, high surface areas) with the advantage... Read More about Rapid synthesis of magnetic microspheres and the development of new macro-micro hierarchically porous magnetic framework composites.

Subnanometer-Wide Indium Selenide Nanoribbons (2023)
Journal Article
Cull, W. J., Skowron, S. T., Hayter, R., Stoppiello, C. T., Rance, G. A., Biskupek, J., …Khlobystov, A. N. (2023). Subnanometer-Wide Indium Selenide Nanoribbons. ACS Nano, 17(6), 6062-6072. https://doi.org/10.1021/acsnano.3c00670

Indium selenides (InxSey) have been shown to retain several desirable properties, such as ferroelectricity, tunable photoluminescence through temperature-controlled phase changes, and high electron mobility when confined to two dimensions (2D). In th... Read More about Subnanometer-Wide Indium Selenide Nanoribbons.

Reactive Jetting of High Viscosity Nanocomposites for Dielectric Elastomer Actuation (2022)
Journal Article
Malas, A., Saleh, E., Giménez‐López, M. D. C., Rance, G. A., Helps, T., Taghavi, M., …Goodridge, R. D. (2022). Reactive Jetting of High Viscosity Nanocomposites for Dielectric Elastomer Actuation. Advanced Materials Technologies, 7(6), Article 2101111. https://doi.org/10.1002/admt.202101111

The layer-by-layer nature of additive manufacturing is well matched to the layer construction of stacked dielectric actuators, with inkjet printing offering a unique opportunity due to its droplet-on-demand capability, suitable for multi-material pro... Read More about Reactive Jetting of High Viscosity Nanocomposites for Dielectric Elastomer Actuation.

The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing (2021)
Journal Article
Hu, Q., Rance, G. A., Trindade, G. F., Pervan, D., Jiang, L., Foerster, A., …Wildman, R. D. (2022). The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing. Additive Manufacturing, 51, Article 102575. https://doi.org/10.1016/j.addma.2021.102575

Two-photon polymerisation (2PP) based additive manufacturing has emerged as a powerful technology to fabricate complex three-dimensional micro- and nanoscale architectures. However, a comprehensive understanding of the effect of printing parameters o... Read More about The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing.

Gel-Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid Networks (2020)
Journal Article
Sen, S., Goodwin, S. E., Barbará, P. V., Rance, G. A., Wales, D., Cameron, J. M., …Walsh, D. A. (2021). Gel-Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid Networks. ACS Applied Polymer Materials, 3(1), 200-208. https://doi.org/10.1021/acsapm.0c01042

The use of electrically charged, polymerized ionic liquids (polyILs) offers opportunities for the development of gel-polymer electrolytes (GPEs), but the rational design of such systems is in its infancy. In this work, we compare the properties of po... Read More about Gel-Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid Networks.

Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices (2020)
Journal Article
Wang, F., Gosling, J. H., Rance, G. A., Trindade, G. F., Makarovsky, O., Cottam, N. D., …Turyanska, L. (2021). Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices. Advanced Functional Materials, 31(5), Article 2007478. https://doi.org/10.1002/adfm.202007478

© 2020 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH 2D materials have unique structural and electronic properties with potential for transformative device applications. However, such devices are usually bespoke structures ma... Read More about Inter-Flake Quantum Transport of Electrons and Holes in Inkjet-Printed Graphene Devices.

A Click Chemistry Strategy for the Synthesis of Efficient Photoinitiators for Two?Photon Polymerization (2020)
Journal Article
Henning, I., Woodward, A. W., Rance, G. A., Paul, B. T., Wildman, R. D., Irvine, D. J., & Moore, J. C. (2020). A Click Chemistry Strategy for the Synthesis of Efficient Photoinitiators for Two?Photon Polymerization. Advanced Functional Materials, 30(50), Article 2006108. https://doi.org/10.1002/adfm.202006108

It is reported that efficient photoinitiators, suitable for two?photon polymerization, can be obtained using the copper catalyzed azide/alkyne cycloaddition reaction. This click chemistry strategy provides a modular approach to the assembly of photoi... Read More about A Click Chemistry Strategy for the Synthesis of Efficient Photoinitiators for Two?Photon Polymerization.

Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting (2019)
Journal Article
Aboulkhair, N. T., Simonelli, M., Salama, E., Rance, G., Neate, N. C., Tuck, C. J., …Hague, R. J. (2019). Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting. Materials Science and Engineering: A, 765, Article 138307. https://doi.org/10.1016/j.msea.2019.138307

Aluminium-based composites reinforced with carbon nanotubes are widely sought for their outstanding metallurgical and structural properties that largely depend on the manufacturing route. In this work, the process-structure-property relationship for... Read More about Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting.

Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior (2019)
Journal Article
Vaithilingam, J., Sanjuan‐Alberte, P., Campora, S., Rance, G. A., Jiang, L., Thorpe, J., …Rawson, F. J. (2019). Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior. Advanced Functional Materials, 29(38), Article 1902016. https://doi.org/10.1002/adfm.201902016

Biological structures control cell behavior via physical, chemical, electrical, and mechanical cues. Approaches that allow us to build devices that mimic these cues in a combinatorial way are lacking due to there being no suitable instructive materia... Read More about Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior.

The effect of MgO/TiO2 on structural and crystallization behavior of near invert phosphate-based glasses (2019)
Journal Article
Islam, M. T., Sharmin, N., Rance, G. A., Titman, J. J., Parsons, A. J., Hossain, K. M. Z., & Ahmed, I. (2020). The effect of MgO/TiO2 on structural and crystallization behavior of near invert phosphate-based glasses. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 108(3), 674-686. https://doi.org/10.1002/jbm.b.34421

Varying formulations in the glass system of 40P2O5─(24 − x)MgO─(16 + x)CaO─(20 − y)Na2O─yTiO2 (where 0 ≤ x ≤ 22 and y = 0 or 1) were prepared via melt-quenching. The structure of the glasses was confirmed by X-ray diffraction (XRD), Fourier transform... Read More about The effect of MgO/TiO2 on structural and crystallization behavior of near invert phosphate-based glasses.

Direct synthesis of multiplexed metal nanowire based devices using carbon nanotubes as vector templates (2019)
Journal Article
Clément, P., Xu, X., Stoppiello, C. T., Rance, G. A., Attanzio, A., O’Shea, J. N., …Palma, M. (2019). Direct synthesis of multiplexed metal nanowire based devices using carbon nanotubes as vector templates. Angewandte Chemie International Edition, 58(29), 9928-9932. https://doi.org/10.1002/anie.201902857

We present the synthesis of metal nanowires in a multiplexed device configuration using single-walled carbon nanotubes (SWNTs) as nanoscale vector templates. The SWNT templates control the dimensionality of the wires, allowing precise control of thei... Read More about Direct synthesis of multiplexed metal nanowire based devices using carbon nanotubes as vector templates.

Water-Based 3D Inkjet Printing of an Oral Pharmaceutical Dosage Form (2019)
Journal Article
Cader, H. K., Rance, G. A., Alexander, M. R., Gonçalves, A. D., Roberts, C. J., Tuck, C. J., & Wildman, R. D. (2019). Water-Based 3D Inkjet Printing of an Oral Pharmaceutical Dosage Form. International Journal of Pharmaceutics, 564, 359-368. https://doi.org/10.1016/j.ijpharm.2019.04.026

Inkjet printing is a form of additive manufacturing where liquid droplets are selectively deposited onto a substrate followed by solidification. The process provides significant potential advantages for producing solid oral dosage forms or tablets, i... Read More about Water-Based 3D Inkjet Printing of an Oral Pharmaceutical Dosage Form.

Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine? (2019)
Journal Article
Pfau, S. A., La Rocca, A., Haffner-Staton, E., Rance, G. A., Fay, M. W., & McGhee, M. (2019). Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine?. SAE Technical Papers, 2019-April, Article 2019-01-0301. https://doi.org/10.4271/2019-01-0301

Formation of soot is a known phenomenon for diesel engines, however, only recently emerged for gasoline engines with the introduction of direct injection systems. Soot-in-oil samples from a three-cylinder turbo-charged gasoline direct injection (GDI)... Read More about Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine?.

A low-friction graphene nanoplatelets film from suspension high velocity oxy-fuel thermal spray (2019)
Journal Article
Venturi, F., Rance, G. A., Thomas, J., & Hussain, T. (2019). A low-friction graphene nanoplatelets film from suspension high velocity oxy-fuel thermal spray. AIP Advances, 9(2), 025216. https://doi.org/10.1063/1.5089021

The addition of graphene-based nanomaterials is known to improve the tribology properties of materials by lowering the coefficient of friction and reducing wear. The covering of small areas with thin graphene-based films is routinely carried out; how... Read More about A low-friction graphene nanoplatelets film from suspension high velocity oxy-fuel thermal spray.

Steric and electronic control of 1,3-dipolar cycloaddition reactions in carbon nanotube nanoreactors (2019)
Journal Article
Miners, S. A., Fay, M. W., Baldoni, M., Besley, E., Khlobystov, A. N., & Rance, G. A. (2019). Steric and electronic control of 1,3-dipolar cycloaddition reactions in carbon nanotube nanoreactors. Journal of Physical Chemistry C, 123(10), 6294-6302. https://doi.org/10.1021/acs.jpcc.9b01190

The use of single-walled carbon nanotubes as effective nanoreactors for preparative bimolecular reactions has been demonstrated for the first time. We show that the extreme spatial confinement of guest reactant molecules inside host carbon nanotubes... Read More about Steric and electronic control of 1,3-dipolar cycloaddition reactions in carbon nanotube nanoreactors.

Revealing the nature of morphological changes in carbon nanotube-polymer saturable absorber under high-power laser irradiation (2018)
Journal Article
Chernysheva, M., Al Alraimi, M., Rance, G. A., Weston, N. J., Shi, B., Saied, S., …Rozhin, A. (2018). Revealing the nature of morphological changes in carbon nanotube-polymer saturable absorber under high-power laser irradiation. Scientific Reports, 8, https://doi.org/10.1038/s41598-018-24734-z

Composites of single-walled carbon nanotubes (SWNTs) and water-soluble polymers (WSP) are the focus of significant worldwide research due to a number of applications in biotechnology and photonics, particularly for ultrashort pulse generation. Despit... Read More about Revealing the nature of morphological changes in carbon nanotube-polymer saturable absorber under high-power laser irradiation.

In situ investigations of the phase change behaviour of tungsten oxide nanostructures (2018)
Journal Article
Thummavichai, K., Wang, N., Xu, F., Rance, G., Xia, Y., & Zhu, Y. (2018). In situ investigations of the phase change behaviour of tungsten oxide nanostructures. Royal Society Open Science, 5, https://doi.org/10.1098/rsos.171932

This study appraises the use of in-situ diffraction and spectroscopy techniques, complemented with ex-situ electron microscopy analyses, to investigate the geometry and phase change behaviour of bundled ultrathin W18O49 nanowires and WO3 nanoparticle... Read More about In situ investigations of the phase change behaviour of tungsten oxide nanostructures.

Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction (2018)
Journal Article
Hu, Q., Sun, X., Parmenter, C. D. J., Fay, M. W., Smith, E. F., Rance, G. A., …Wildman, R. (2018). Author Correction: Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports, 8(1), Article 3512. https://doi.org/10.1038/s41598-018-21513-8

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear (2017)
Journal Article
Murray, J. W., Rance, G. A., Xu, F., & Hussain, T. (in press). Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear. Journal of the European Ceramic Society, https://doi.org/10.1016/j.jeurceramsoc.2017.10.022

An alumina coating containing 1 wt.% graphene nanoplatelets (GNPs) is deposited for the first time by suspension high velocity oxy-fuel (SHVOF) thermal spraying – an emerging coating deposition technique. Raman spectroscopy shows the GNPs survive the... Read More about Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear.