All Outputs (9)

Imaging Microstructure on Optically Rough Surfaces Using Spatially Resolved Acoustic Spectroscopy (2023)
Journal Article
Li, W., Dryburgh, P., Pieris, D., Patel, R., Clark, M., & Smith, R. J. (2023). Imaging Microstructure on Optically Rough Surfaces Using Spatially Resolved Acoustic Spectroscopy. Applied Sciences, 13(6), Article 3424. https://doi.org/10.3390/app13063424

The microstructure of a material defines many of its mechanical properties. Tracking the microstructure of parts during their manufacturing is needed to ensure the designed performance can be obtained, especially for additively manufactured parts. Me... Read More about Imaging Microstructure on Optically Rough Surfaces Using Spatially Resolved Acoustic Spectroscopy.

Measurement of the single crystal elasticity matrix of polycrystalline materials (2021)
Journal Article
Dryburgh, P., Li, W., Pieris, D., Fuentes-Domínguez, R., Patel, R., Smith, R. J., & Clark, M. (2022). Measurement of the single crystal elasticity matrix of polycrystalline materials. Acta Materialia, 225, Article 117551. https://doi.org/10.1016/j.actamat.2021.117551

Many engineering metals are polycrystalline, as such the elasticity, crystalline orientation and grain distribution are cardinal factors in determining the physical properties of the material. The grain distribution can be measured using a number of... Read More about Measurement of the single crystal elasticity matrix of polycrystalline materials.

Spatially resolved acoustic spectroscopy for integrity assessment in wire–arc additive manufacturing (2019)
Journal Article
Dryburgh, P., Pieris, D., Martina, F., Patel, R., Sharples, S., Li, W., …Smith, R. J. (2019). Spatially resolved acoustic spectroscopy for integrity assessment in wire–arc additive manufacturing. Additive Manufacturing, 28, 236-251. https://doi.org/10.1016/j.addma.2019.04.015

Wire-arc additive manufacturing (WAAM) is an emergent method for the production and repair of high value components. Introduction of plastic strain by inter-pass rolling has been shown to produce grain refinement and improve mechanical properties, ho... Read More about Spatially resolved acoustic spectroscopy for integrity assessment in wire–arc additive manufacturing.

Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing (2019)
Journal Article
Pieris, D., Patel, R., Dryburgh, P., Hirsch, M., Li, W., Sharples, S., …Clark, M. (2019). Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing. Insight - Non-Destructive Testing & Condition Monitoring, 61(3), 132-137. https://doi.org/10.1784/insi.2019.61.3.132

High-integrity engineering applications such as aerospace will not permit the incorporation of components containing any structural defects. The current generation of additive manufacturing (AM) platforms yield components with relatively high level... Read More about Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing.

Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing (2018)
Conference Proceeding
Milesh Pieris, D., Patel, R., Dryburgh, P., Hirsch, M., Li, W., Sharples, S. D., …Clark, M. (2018). Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing. In 57th Annual Conference of the British Institute of Non-Destructive Testing

High-integrity engineering applications such as aerospace will not permit the incorporation of components containing any structural defects. The current generation of additive manufacturing platforms yield components with relatively high levels of... Read More about Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing.

Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy (2017)
Journal Article
Hirsch, M., Catchpole-Smith, S., Patel, R., Marrow, P., Li, W., Tuck, C., …Clare, A. T. (2017). Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 473(2205), https://doi.org/10.1098/rspa.2017.0194

Developments in additive manufacturing technology are serving to expand the potential applications. Critical developments are required in the supporting areas of measurement and in process inspection to achieve this. CM247LC is a nickel superalloy th... Read More about Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy.

Orientation imaging of macro-sized polysilicon grains on wafers using spatially resolved acoustic spectroscopy (2017)
Journal Article
Patel, R., Li, W., Smith, R. J., Sharples, S. D., & Clark, M. (2017). Orientation imaging of macro-sized polysilicon grains on wafers using spatially resolved acoustic spectroscopy. Scripta Materialia, 140, 67-70. https://doi.org/10.1016/j.scriptamat.2017.07.003

Due to its economical production process polysilicon, or multicrystalline silicon, is widely used to produce solar cell wafers. However, the conversion efficiencies are often lower than equivalent monocrystalline or thin film cells, with the structur... Read More about Orientation imaging of macro-sized polysilicon grains on wafers using spatially resolved acoustic spectroscopy.

Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture (2016)
Journal Article
Hirsch, M., Patel, R., Li, W., Guan, G., Leach, R. K., Sharples, S. D., & Clare, A. T. (2017). Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture. Additive Manufacturing, 13, 135-142. https://doi.org/10.1016/j.addma.2016.10.004

Unlike more established subtractive or constant volume manufacturing technologies, additive manufacturing methods suffer from a lack of in-situ monitoring methodologies which can provide informationrelating to process performance and the formation of... Read More about Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture.

Determination of crystallographic orientation of large grain metals with surface acoustic waves (2012)
Journal Article
Li, W., Sharples, S. D., Smith, R. J., Clark, M., & Somekh, M. G. (2012). Determination of crystallographic orientation of large grain metals with surface acoustic waves. Journal of the Acoustical Society of America, 132(2), 738-745. https://doi.org/10.1121/1.4731226

A previously described laser ultrasonic technique known as spatially resolved acoustic spectroscopy (SRAS) can be used to image surface microstructure, using the local surface acoustic wave (SAW) velocity as a contrast mechanism. It is shown here tha... Read More about Determination of crystallographic orientation of large grain metals with surface acoustic waves.