Skip to main content

Research Repository

Advanced Search

All Outputs (17)

Cooling System Sizing using LPTN Analysis and Multiphysics Modelling for an Axial Flux Machine and Integrated Drive (2022)
Conference Proceeding
Jeffrey, A. J., Connor, P. H., Vakil, G., Evans, P., Wheeler, P., & Hart, S. (2022). Cooling System Sizing using LPTN Analysis and Multiphysics Modelling for an Axial Flux Machine and Integrated Drive. . https://doi.org/10.1109/icem51905.2022.9910820

In this paper a Lumped Parameter Thermal Network (LPTN) is proposed for a Yokeless and Segmented Armature (YASA) axial flux permanent magnet (AFPM) machine. A simulation model is used to examine the machine in isolation, with an Integrated Motor Driv... Read More about Cooling System Sizing using LPTN Analysis and Multiphysics Modelling for an Axial Flux Machine and Integrated Drive.

Investigating Synchronous Reluctance Rotor Performance for Traction Applications against a Permanent Magnet Benchmark (2022)
Conference Proceeding
Connor, P. H., Khowja, M., La Rocca, A., La Rocca, S., Zou, T., Vakil, G., …Paciura, K. (2022). Investigating Synchronous Reluctance Rotor Performance for Traction Applications against a Permanent Magnet Benchmark. . https://doi.org/10.1109/icem51905.2022.9910649

This paper investigates the potential benefits for the use of synchronous reluctance machines for traction applications. Permanent magnet machines are often used to generate the highest power densities. However, magnet use has drawbacks including tem... Read More about Investigating Synchronous Reluctance Rotor Performance for Traction Applications against a Permanent Magnet Benchmark.

On the Fault Tolerance and PM Demagnetisation of a High-Performance Aircraft Propulsion Motor (2022)
Conference Proceeding
Hebala, A., Nuzzo, S., Connor, P. H., Gerada, C., & Galea, M. (2022). On the Fault Tolerance and PM Demagnetisation of a High-Performance Aircraft Propulsion Motor. . https://doi.org/10.1109/icem51905.2022.9910866

In this paper, a study of the fault-tolerance and demagnetisation of a high-performance aircraft propulsion motor is investigated. The motor is proposed with either three or four sets of three-phase windings, while maintaining the same magnetic and t... Read More about On the Fault Tolerance and PM Demagnetisation of a High-Performance Aircraft Propulsion Motor.

Analysis and Mitigation of AC Losses in High Performance Propulsion Motors (2022)
Journal Article
Hebala, A., Nuzzo, S., Connor, P. H., Volpe, G., Gerada, C., & Galea, M. (2022). Analysis and Mitigation of AC Losses in High Performance Propulsion Motors. Machines, 10(9), Article 780. https://doi.org/10.3390/machines10090780

In this paper, the AC copper losses in classical random windings are investigated and mitigated using several techniques across a range of permanent magnet synchronous motor designs. At high operating frequencies, AC copper losses can represent a sub... Read More about Analysis and Mitigation of AC Losses in High Performance Propulsion Motors.

Practical Implementation and Associated Challenges of Integrated Torque Limiter (2022)
Journal Article
Ilkhani, M. R., Syed, S. A., Connor, P. H., Vakil, G., Gerada, C., Rashed, M., & Benarous, M. (2022). Practical Implementation and Associated Challenges of Integrated Torque Limiter. SAE Technical Papers, Article 2022-01-0038. https://doi.org/10.4271/2022-01-0038

Evolving of aircraft design towards further electrification requires safe and fault-free operation of all the components. More electric aircraft are increasingly utilizing electro-mechanical actuators (EMA). EMAs are prone to jamming and subsequent f... Read More about Practical Implementation and Associated Challenges of Integrated Torque Limiter.

Improved Propulsion Motor Design for a Twelve Passenger All-Electric Aircraft (2021)
Conference Proceeding
Hebala, A., Nuzzo, S., Connor, P. H., Giangrande, P., Gerada, C., & Galea, M. (2021). Improved Propulsion Motor Design for a Twelve Passenger All-Electric Aircraft. In 2021 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (343-348). https://doi.org/10.1109/wemdcd51469.2021.9425667

This paper investigates the design of a 12-seater aircraft electric propulsion motor (ProMo). The design procedures aim to improve the performance of a previously designed motor, while adding further restrictions to the electrical and thermal boundar... Read More about Improved Propulsion Motor Design for a Twelve Passenger All-Electric Aircraft.

4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft (2021)
Journal Article
Golovanov, D., Gerada, D., Sala, G., Degano, M., Trentin, A., Connor, P. H., …Gerada, C. (2021). 4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft. IEEE Transactions on Transportation Electrification, 7(4), 2952-2964. https://doi.org/10.1109/TTE.2021.3068928

This article describes the underpinning research, development, construction, and testing of a 4-MW multithree phase generator designed for a hybrid-electric aircraft propulsion system demonstrator. The aim of the work is to demonstrate gravimetric po... Read More about 4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft.

Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation (2020)
Journal Article
Trentin, A., Sala, G., Tarisciotti, L., Galassini, A., Degano, M., Connor, P. H., …Gerada, C. (2021). Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation. IEEE Transactions on Industrial Electronics, 68(12), 11684-11695. https://doi.org/10.1109/TIE.2020.3040692

In this article, we describe the research and development of a 3 kV active rectifier for a 4 MW aerospace generator drive system demonstrator. The converter is fed by a multiphase high-speed/high-frequency permanent magnet generator. The main aim of... Read More about Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation.

PM Halbach Arrays in Motors: Loss Reduction and Performance Improvements (2020)
Conference Proceeding
Hebala, A., Nuzzo, S., Connor, P. H., Giangrande, P., Gerada, C., & Galea, M. (2020). PM Halbach Arrays in Motors: Loss Reduction and Performance Improvements. . https://doi.org/10.23919/ICEMS50442.2020.9291234

© 2020 The Institute of Electrical Engineers of Japan. Halbach array configurations represent a common choice in high-performance electrical machines, since a stronger magnetic field is generated for the same Permanent Magnet (PM) volume. Hence, high... Read More about PM Halbach Arrays in Motors: Loss Reduction and Performance Improvements.

Energy Storage System Selection for Optimal Fuel Consumption of Aircraft Hybrid Electric Taxiing Systems (2020)
Journal Article
Recalde, A., Lukic, M., Hebala, A., Giangrande, P., Klumpner, C., Nuzzo, S., …Galea, M. (2021). Energy Storage System Selection for Optimal Fuel Consumption of Aircraft Hybrid Electric Taxiing Systems. IEEE Transactions on Transportation Electrification, 7(3), 1870-1887. https://doi.org/10.1109/TTE.2020.3039759

IEEE Aircraft taxiing is conventionally performed using the main engines’ inefficient idle thrust. Therefore, in line with greener aviation, the electrification of taxiing is the most viable option to reduce emissions, noise, and fossil fuel consumpt... Read More about Energy Storage System Selection for Optimal Fuel Consumption of Aircraft Hybrid Electric Taxiing Systems.

Thermal and Electromagnetic Stator Vent Design Optimisation for Synchronous Generators (2020)
Journal Article
Bersch, K., Nuzzo, S., Connor, P. H., Eastwick, C. N., Rolston, R., & Galea, M. (2021). Thermal and Electromagnetic Stator Vent Design Optimisation for Synchronous Generators. IEEE Transactions on Energy Conversion, 36(1), 207-217. https://doi.org/10.1109/tec.2020.3004393

© 2020 Institute of Electrical and Electronics Engineers Inc.. All rights reserved. This paper deals with the stator cooling of an air-cooled, synchronous generator with a power rating of 400 kVA, which has been improved by adding two radial vents to... Read More about Thermal and Electromagnetic Stator Vent Design Optimisation for Synchronous Generators.

Numerical investigations of convective phenomena of oil impingement on end-windings (2019)
Journal Article
Connor, P. H., La Rocca, A., Xu, Z., Eastwick, C. N., Pickering, S. J., & Gerada, C. (2019). Numerical investigations of convective phenomena of oil impingement on end-windings. Journal of Engineering, 2019(17), 4022-4026. https://doi.org/10.1049/joe.2018.8027

A novel experimental rig for analysing intensive liquid cooling of highly power-dense electrical machine components has been developed. Coupled fluid flow and heat transfer have been modelled, using computational fluid dynamics (CFD), to inform the d... Read More about Numerical investigations of convective phenomena of oil impingement on end-windings.

Numerical investigations of convective phenomena of oil impingement on end-windings (2018)
Conference Proceeding
Connor, P., La Rocca, A., Xu, Z., Eastwick, C., Pickering, S., & Gerada, C. (2018). Numerical investigations of convective phenomena of oil impingement on end-windings.

A novel experimental rig for analysing intensive liquid cooling of highly power-dense electrical machine components has been developed. Coupled fluid flow and heat transfer has been modelled, using computational fluid dynamics (CFD), to inform the de... Read More about Numerical investigations of convective phenomena of oil impingement on end-windings.

Stator and rotor vent modelling in a MVA rated synchronous machine (2016)
Conference Proceeding
Connor, P. H., Eastwick, C., Pickering, S. J., Gerada, C., & Rolston, R. (2016). Stator and rotor vent modelling in a MVA rated synchronous machine. In 2016 XXII International Conference on Electrical Machines (ICEM) (571-577). https://doi.org/10.1109/ICELMACH.2016.7732583

An investigation into the solution dependence of a conjugate heat transfer computational fluid dynamics (CFD) model of a synchronous generator, with respect to meshing, has been carried out. Utilising CFD as a tool for investigating the airflow and t... Read More about Stator and rotor vent modelling in a MVA rated synchronous machine.

Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management (2013)
Journal Article
Connor, P. H., Pickering, S., Gerada, C., Eastwick, C., Micallef, C., & Tighe, C. (2013). Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management. IET Electric Power Applications, 7(3), https://doi.org/10.1049/iet-epa.2012.0278

This study is the first in a series dedicated to investigating the airflow and thermal management of electrical machines. Owing to the temperature dependent resistive losses in the machine's windings, any improvement in cooling provides a direct redu... Read More about Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management.

CFD modelling of an entire synchronous generator for improved thermal management (2012)
Conference Proceeding
Connor, P. H., Pickering, S. J., Gerada, C., Eastwick, C. N., & Micallef, C. (2012). CFD modelling of an entire synchronous generator for improved thermal management. . https://doi.org/10.1049/cp.2012.0290

This paper is the first in a series dedicated to investigating the airflow and thermal management of electrical machines. Due to the temperature dependent resistive losses in the machine's windings any improvement in cooling provides a direct reducti... Read More about CFD modelling of an entire synchronous generator for improved thermal management.