Skip to main content

Research Repository

Advanced Search

All Outputs (52)

Fillet Radius Impact of Rectangular Insulated Wires on PDIV for Turn-to-Turn Insulation of Inverter-Fed Motors (2024)
Journal Article
Naderiallaf, H., Degano, M., Gerada, C., & Gerada, D. (2024). Fillet Radius Impact of Rectangular Insulated Wires on PDIV for Turn-to-Turn Insulation of Inverter-Fed Motors. IEEE Transactions on Dielectrics and Electrical Insulation, 1-1. https://doi.org/10.1109/tdei.2024.3355032

This contribution elucidates the impact of the fillet radius, a geometric feature of rectangular insulated wires not commonly considered, on the partial discharge inception voltage (PDIV) in low-voltage machine turn-to-turn winding insulation. Initia... Read More about Fillet Radius Impact of Rectangular Insulated Wires on PDIV for Turn-to-Turn Insulation of Inverter-Fed Motors.

A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs (2023)
Conference Proceeding
Zhu, G., Xu, Z., Zhang, F., Gerada, C., & Gerada, D. (2023). A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs. In 26th International Conference on Electrical Machines and Systems (ICEMS). https://doi.org/10.1109/icems59686.2023.10344616

Thermal management is critical for high-power-density permanent magnet synchronous machines (PMSMs). To realize the efficient and effective design optimization of self-ventilated air cooling systems for PMSMs, in this paper, a Taguchi-preconditioned... Read More about A Taguchi-LHS-RSM Double-Staged Approach for Design Optimization of Self-Ventilated Cooling Systems Utilized in PMSMs.

Research on the Effect of Heat Pipe Inclination Angle on Temperature Distribution in Electrical Machines (2023)
Journal Article
Zhao, H., Zhang, X., Li, J., Zhang, F., Zhang, Y., Yan, H., …Gerada, D. (2023). Research on the Effect of Heat Pipe Inclination Angle on Temperature Distribution in Electrical Machines. IEEE Transactions on Industry Applications, 56(6), 1-11. https://doi.org/10.1109/tia.2023.3310977

Due to high equivalent thermal conductivity with lightweight and small size, heat pipes (HPs) are being extensively applied in the motor cooling system to improve its thermal performance. However, when practically installed in electrical machines, th... Read More about Research on the Effect of Heat Pipe Inclination Angle on Temperature Distribution in Electrical Machines.

Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity (2023)
Journal Article
Li, Z., Xu, Z., Zhang, F., Gerada, D., Guo, R., Zhang, H., …Zhang, C. (2023). Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity. IEEE Transactions on Transportation Electrification, 1-1. https://doi.org/10.1109/TTE.2023.3262766

Litz wires are widely used in electrical machines with reduced AC losses, compared to traditional random winding. The reduced AC losses can improve both electrical machines electromagnetic performance, such as efficiency and thermal performance. Ther... Read More about Analytical Calculation and Experimental Validation of Litz Wires Axial Thermal Conductivity.

Heat Pipe Bending Effect on Cooling Effectiveness in Electrical Machines (2023)
Journal Article
Zhao, H., Zhang, X., Li, J., Wang, H., Zhang, F., Zhang, H., …Gerada, D. (2023). Heat Pipe Bending Effect on Cooling Effectiveness in Electrical Machines. IEEE Transactions on Energy Conversion, 38(3), 2011-2021. https://doi.org/10.1109/tec.2023.3249971

Heat pipes(HPs) are being extensively explored in motor cooling scenarios for enhanced cooling capacity. HPs are commonly bent to adapt to the compact structure of electrical machines, whereas the bending effect on motor cooling effectiveness still r... Read More about Heat Pipe Bending Effect on Cooling Effectiveness in Electrical Machines.

Impact of stator interturn short circuit fault on shaft voltage in a synchronous generator (2022)
Journal Article
He, Y., Yang, P., Sun, K., Xu, Z., Wang, H., He, X., & Gerada, D. (2023). Impact of stator interturn short circuit fault on shaft voltage in a synchronous generator. IET Electric Power Applications, 17(3), 381-391. https://doi.org/10.1049/elp2.12271

Shaft voltage often exists in synchronous generators due to the assembly error or various faults after the long‐term performance. The article investigates the shaft voltage characteristic under the stator interturn short circuit (SISC) condition. Dif... Read More about Impact of stator interturn short circuit fault on shaft voltage in a synchronous generator.

Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction (2022)
Journal Article
Zou, T., Gerada, D., La Rocca, S., La Rocca, A., Walker, A., Vakil, G., …Gerada, C. (2023). Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction. IEEE Transactions on Industry Applications, 59(2), 1557-1570. https://doi.org/10.1109/TIA.2022.3225255

Synchronous reluctance (Syn-Rel) machines with embedded permanent magnets (PMs) are research hotspots in variable speed motor drives due to their robust rotor structure and wide constant power speed range (CPSR). In this paper, the potential of PM-as... Read More about Airgap Length Analysis of a 350kW PM-Assisted Syn-Rel Machine for Heavy Duty EV Traction.

Stator current identification in generator among single and composite faults composed by static air‐gap eccentricity and rotor inter‐turn short circuit (2022)
Journal Article
He, Y., Qiu, M., Jiang, M., Zhou, F., Gerada, D., Zhang, X., & Du, X. (2023). Stator current identification in generator among single and composite faults composed by static air‐gap eccentricity and rotor inter‐turn short circuit. IET Electric Power Applications, 17(2), 268-278. https://doi.org/10.1049/elp2.12260

In this study, a fault diagnosis model based on magnetic density is proposed to analyse the current characteristics of synchronous generator rotor inter‐turn short circuit and air gap eccentric single fault and composite fault. The model considers th... Read More about Stator current identification in generator among single and composite faults composed by static air‐gap eccentricity and rotor inter‐turn short circuit.

2-DOF Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios (2022)
Journal Article
Wang, M., Buticchi, G., Li, J., Gu, C., Gerada, D., Degano, M., …Gerada, C. (2023). 2-DOF Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios. IEEE Transactions on Transportation Electrification, 9(2), 2048-2058. https://doi.org/10.1109/TTE.2022.3210909

In high performance drive systems, wide bandwidth and reference tracking accuracy of current control loop are fundamental requirements. The conventional PI controller provides robustness against the machine parameter mismatching and zero steady-state... Read More about 2-DOF Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios.

Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications (2022)
Conference Proceeding
Tameemi, A., Degano, M., Di Nardo, M., Murataliyev, M., Gerada, D., Xu, Z., & Gerada, C. (2022). Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications. In 2022 International Conference on Electrical Machines (ICEM) (807-813). https://doi.org/10.1109/icem51905.2022.9910911

Permanent magnet synchronous motors are very suitable in applications demanding high power density with high performance requirements, such as in aerospace actuators. Achieving high performance targets while keeping the total weight of the electrical... Read More about Power Loss and Performance Analysis of a Permanent Magnet Synchronous Motor for Actuator Applications.

Fast Sizing Tool and Optimization Technique for Concentrated Wound Slotless Outer Rotor Motor for eVTOL Application (2022)
Conference Proceeding
Dave, N., Gerada, D., Vakil, G., Zhang, H., Shi, B., Zhang, F., …Gerada, C. (2022). Fast Sizing Tool and Optimization Technique for Concentrated Wound Slotless Outer Rotor Motor for eVTOL Application. In 2022 International Conference on Electrical Machines (ICEM) (2094-2099). https://doi.org/10.1109/ICEM51905.2022.9910584

This paper aims to present the feasibility and advantages of slotless motors for electric aircraft applications. Currently, eVTOL (electric vertical takeoff and landing) aircraft are equipped with a slotted motor with concentrated windings and an out... Read More about Fast Sizing Tool and Optimization Technique for Concentrated Wound Slotless Outer Rotor Motor for eVTOL Application.

Impact of Radial Air-Gap Eccentricity on Stator End Winding Vibration Characteristics in DFIG (2022)
Journal Article
Xu, M., He, Y., Zhang, W., Dai, D., Liu, X., Zheng, W., …Shi, S. (2022). Impact of Radial Air-Gap Eccentricity on Stator End Winding Vibration Characteristics in DFIG. Energies, 15(17), Article 6426. https://doi.org/10.3390/en15176426

In this paper, qualitative theoretical derivations, finite element analysis (FEA) and experiments are used to investigate the electromagnetic force (EF) and vibration characteristics of end windings. In contrast to previous studies, this study focuse... Read More about Impact of Radial Air-Gap Eccentricity on Stator End Winding Vibration Characteristics in DFIG.

Comparison of AC Losses in the Winding of Electrical Machines with Fixed Strands Positions, Fixed Conductor Shapes and Random Winding (2022)
Journal Article
Bardalai, A., Gerada, D., Zou, T., Degano, M., Zhang, C., & Gerada, C. (2022). Comparison of AC Losses in the Winding of Electrical Machines with Fixed Strands Positions, Fixed Conductor Shapes and Random Winding. Energies, 15(15), Article 5701. https://doi.org/10.3390/en15155701

In high performance electric machines, the increase of fundamental frequency leads to additional losses in the winding due to parasitic effects such as the associated skin and proximity effects. In the first part, this paper presents an investigation... Read More about Comparison of AC Losses in the Winding of Electrical Machines with Fixed Strands Positions, Fixed Conductor Shapes and Random Winding.

Analytical Model for the Open Circuit Field due to Different Magnetization Patterns of the rotor in the Slotless Machines (2022)
Conference Proceeding
Dave, N., Gerada, D., Vakil, G., Zhang, H., Li, J., & Gerada, C. (2022). Analytical Model for the Open Circuit Field due to Different Magnetization Patterns of the rotor in the Slotless Machines. In 2022 International Conference on Electrical Machines (ICEM) (1204-1210). https://doi.org/10.1109/icem51905.2022.9910580

From the existing literature, the open circuit field due to different magnetisations of the rotor magnets is known. This includes field due to parallel, radial and Halbach magnetisation. This paper presents the generalised analytical model to represe... Read More about Analytical Model for the Open Circuit Field due to Different Magnetization Patterns of the rotor in the Slotless Machines.

Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios (2022)
Journal Article
Wang, M., Buticchi, G., Li, J., Gu, C., Gerada, D., Degano, M., …Geradab, C. (2022). Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios. IEEE Journal of Emerging and Selected Topics in Power Electronics, https://doi.org/10.1109/jestpe.2022.3179184

Implementation of proportional-integral (PI) controllers in synchronous reference frame (SRF) is a well-established current control solution for electric drives. It is a general and effective method in digital control as long as the ratio of Sampling... Read More about Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios.

Impact of Stator Segmentation on the Performance of Aerospace Propulsion Machines (2022)
Journal Article
Ramanathan Mathavan Jeyabalan, R. K., Vakil, G., Gerada, D., Gerada, C., & Minshull, J. (2022). Impact of Stator Segmentation on the Performance of Aerospace Propulsion Machines. SAE Technical Papers, 4(4), 1048-1056. https://doi.org/10.4271/2022-01-0039

Electric machines offering a high power density are required for aerospace applications. Soft magnetic material with a high saturation flux density is one of the key component which is required to realize these power density targets. The need for a h... Read More about Impact of Stator Segmentation on the Performance of Aerospace Propulsion Machines.

A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors (2022)
Journal Article
Zou, T., Gerada, D., La Rocca, A., Moslemin, M., Cairns, A., Cui, M., …Gerada, C. (2022). A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors. IEEE Transactions on Transportation Electrification, 8(3), 3578-3593. https://doi.org/10.1109/TTE.2022.3149786

The rapidly increasing demand on power density levels of electric vehicle (EV) drive systems is pushing the boundaries of traction motor performance. Hairpin windings are becoming a popular option for EV motors due to their reduced DC losses and impr... Read More about A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors.

Performance Entitlement by Using Novel High Strength Electrical Steels and Copper Alloys for High-Speed Laminated Rotor Induction Machines (2022)
Journal Article
Zhang, F., Gerada, D., Xu, Z., He, Y., Zhang, H., Hua, W., & Gerada, C. (2022). Performance Entitlement by Using Novel High Strength Electrical Steels and Copper Alloys for High-Speed Laminated Rotor Induction Machines. Electronics, 11(2), 210. https://doi.org/10.3390/electronics11020210

The laminated rotor Induction Machine (IM), with its simple construction and manufacturing, robustness, ease of control and comparatively lower cost remains by far the most utilized electromechanical energy converter. At very high speeds, traditional... Read More about Performance Entitlement by Using Novel High Strength Electrical Steels and Copper Alloys for High-Speed Laminated Rotor Induction Machines.

Carbon Emission Analysis of Electrical Machines (2021)
Conference Proceeding
Zhang, X., Xu, Z., Gerada, C., & Gerada, D. (2021). Carbon Emission Analysis of Electrical Machines. In 2021 24th International Conference on Electrical Machines and Systems (ICEMS) (1678-1683). https://doi.org/10.23919/ICEMS52562.2021.9634279

The industry places increased importance on carbon reduction. Many are focused on lowering the fuel consumption of electrical machines, however, carbon emissions from the acquisition of raw materials and the energy consumption of manufacturing proces... Read More about Carbon Emission Analysis of Electrical Machines.

A critical review on thermal management technologies for motors in electric cars (2021)
Journal Article
Wang, X., Li, B., Gerada, D., Huang, K., Stone, I., Worrall, S., & Yan, Y. (2022). A critical review on thermal management technologies for motors in electric cars. Applied Thermal Engineering, 201(Part A), Article 117758. https://doi.org/10.1016/j.applthermaleng.2021.117758

The development of electric cars has well been regarded as a major solution for tackling the challenges of carbon-neutrality faced by the modern communities. Electric motor is certainly the core and most important components of an electric car, and t... Read More about A critical review on thermal management technologies for motors in electric cars.