Skip to main content

Research Repository

Advanced Search

All Outputs (160)

Phase-shift-modulation for a current-fed isolated DC-DC converter in more electric aircraft (2018)
Journal Article
Chen, L., Tarisciotti, L., Costabeber, A., Guan, Q., Wheeler, P., & Zanchetta, P. (2019). Phase-shift-modulation for a current-fed isolated DC-DC converter in more electric aircraft. IEEE Transactions on Power Electronics, 34(9), 8528-8543. https://doi.org/10.1109/tpel.2018.2889861

A Phase-Shift-Modulation (PSM) technique is proposed for an Active-Bridge-Active-Clamp (ABAC) topology. This topology is aimed for high power more-electric-aircraft applications. The proposed PSM has a complete switching harmonics cancellation on the... Read More about Phase-shift-modulation for a current-fed isolated DC-DC converter in more electric aircraft.

Simplified Damper Cage Circuital Model and Fast Analytical–Numerical Approach for the Analysis of Synchronous Generators (2018)
Journal Article
Nuzzo, S., Bolognesi, P., Gerada, C., & Galea, M. (2019). Simplified Damper Cage Circuital Model and Fast Analytical–Numerical Approach for the Analysis of Synchronous Generators. IEEE Transactions on Industrial Electronics, 66(11), 8361-8371. https://doi.org/10.1109/tie.2018.2885737

The long and enduring history of utilization of the wound-field synchronous generator in a large number of applications makes it one of the most known and consolidated electrical machine technologies. Thus, its design, modeling, and analysis processe... Read More about Simplified Damper Cage Circuital Model and Fast Analytical–Numerical Approach for the Analysis of Synchronous Generators.

A Wideband Fault Location Scheme for Active Distribution Systems (2018)
Conference Proceeding
Aboshady, F., Sumner, M., & Thomas, D. (2018). A Wideband Fault Location Scheme for Active Distribution Systems. In 2018 International Conference on Renewable Energy Research and Applications (ICRERA) (891-896). https://doi.org/10.1109/ICRERA.2018.8566780

This paper proposes a fault location technique for future distribution systems with distributed generation. The technique considers the circuit analysis at the non-fundamental frequencies that are generated when a fault occurs. To consider both induc... Read More about A Wideband Fault Location Scheme for Active Distribution Systems.

Holistic appraisal of modeling installed antennas for aerospace applications (2018)
Journal Article
Vukovic, A., Sewell, P., & Benson, T. (2019). Holistic appraisal of modeling installed antennas for aerospace applications. IEEE Transactions on Antennas and Propagation, 67(3), 1396-1409. https://doi.org/10.1109/TAP.2018.2884769

This paper uses the Unstructured Transmission Line Modeling Method to investigate near field interactions between a broadband microwave antenna and a platform that arise as a result of antenna installation. The antenna, feed line and the platform are... Read More about Holistic appraisal of modeling installed antennas for aerospace applications.

Design Considerations of Fault-Tolerant Electromechanical Actuator Systems for More Electric Aircraft (MEA) (2018)
Conference Proceeding
Zhu, S., Cox, T., Xu, Z., Gerada, C., & Li, C. (2018). Design Considerations of Fault-Tolerant Electromechanical Actuator Systems for More Electric Aircraft (MEA). . https://doi.org/10.1109/ECCE.2018.8557426

This paper studies the concerns such as architecture and reliability in the deployment of electromechanical actuator (EMA) in the actuation system for more electric aircraft (MEA). First, the reliability of the actuation system architecture such as c... Read More about Design Considerations of Fault-Tolerant Electromechanical Actuator Systems for More Electric Aircraft (MEA).

Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization (2018)
Conference Proceeding
Mahmoud, H., Degano, M., Bacco, G., Bianchi, N., & Gerada, C. (2018). Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization. In 2018 IEEE Energy Conversion Congress and Exposition (ECCE) (1640-1647). https://doi.org/10.1109/ECCE.2018.8558292

The complex rotor structure of synchronous reluctance machines causes a high harmonic content in the air-gap flux density and then flux density fluctuations in different iron parts. The importance of determining accurately the total iron losses in th... Read More about Synchronous Reluctance Motor Iron Losses: Analytical Model and Optimization.

A Twin Spool Engine Emulator for the Study of Power Exchange Idea (2018)
Conference Proceeding
Enalou, H. B., Rashed, M., Kulsangcharoen, P., Chowdhury, S., & Bozhko, S. (2018). A Twin Spool Engine Emulator for the Study of Power Exchange Idea. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-8). https://doi.org/10.1109/ESARS-ITEC.2018.8607540

The More Electric Aircraft (MEA) engine, with electrical machines on both HP and LP shafts, makes it possible to transfer power electrically from one spool to another. Preliminary results have shown considerable improvement in turbofan performance in... Read More about A Twin Spool Engine Emulator for the Study of Power Exchange Idea.

Reliability Analysis of SiC MOSFET Power Module for More Electric Aircraft Motor Drive Applications (2018)
Conference Proceeding
O'Donnell, S., Wheeler, P., & Castellazzi, A. (2018). Reliability Analysis of SiC MOSFET Power Module for More Electric Aircraft Motor Drive Applications. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-4). https://doi.org/10.1109/esars-itec.2018.8607615

This paper presents a reliability study on a Microsemi 5 kVA Integrated Power Solutions (IPS) module designed to drive an electrical motor in a More Electric Aircraft actuation system. The measures taken in the design of the product and the reliabili... Read More about Reliability Analysis of SiC MOSFET Power Module for More Electric Aircraft Motor Drive Applications.

Comparative Study Of Back EMF Based Sensorless Control Methods For Dual Three-Phase PMSM (2018)
Conference Proceeding
Fan, L., Yang, T., Rashed, M., & Bozhko, S. (2018). Comparative Study Of Back EMF Based Sensorless Control Methods For Dual Three-Phase PMSM. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/esars-itec.2018.8607439

Multiphase electrical machines have gained increased attentions recently due to its fault tolerance capability which is of great importance for more-electric aircraft application. This paper studies sensorless control of a high-speed dual three-phase... Read More about Comparative Study Of Back EMF Based Sensorless Control Methods For Dual Three-Phase PMSM.

Modulated Model Predictive Speed Control for PMSM Drives (2018)
Conference Proceeding
Garcia, C., Rodriguez, J., Odhano, S., Zanchetta, P., & Davari, S. A. (2018). Modulated Model Predictive Speed Control for PMSM Drives. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607701

Model predictive control (MPC) presents important advantages in the control of the power converter and drives such as, fast dynamic response and capability to include non-linear constrains. These have positioned MPC as a powerful and realistic contro... Read More about Modulated Model Predictive Speed Control for PMSM Drives.

Design and Mathematical Modeling of Gearless SMC Flux Reversal Motor (2018)
Conference Proceeding
Prakht, V., Golovanov, D., Dmitrievskii, V., Gerada, D., & Kazakbaev, V. (2018). Design and Mathematical Modeling of Gearless SMC Flux Reversal Motor. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607567

© 2018 IEEE. This paper considers the design of a three-phase gearless flux reversal machine (FRM) with permanent magnets (PM) mounted on the stator. Its stator magnetic core is made of a solid soft magnetic composite material (SMC) with a slot for l... Read More about Design and Mathematical Modeling of Gearless SMC Flux Reversal Motor.

Impact of thermal overload on the insulation aging in short duty cycle motors for aerospace (2018)
Conference Proceeding
Madonna, V., Giangrande, P., Lusuardi, L., Cavallini, A., & Galea, M. (2018). Impact of thermal overload on the insulation aging in short duty cycle motors for aerospace. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607539

Electric motors for aerospace applications are often characterised by short-time duty rather than continuous-duty operations. Some of the main requirements for these machines are high torque density and reliability. Considerable torque density improv... Read More about Impact of thermal overload on the insulation aging in short duty cycle motors for aerospace.

Design of Fault-Tolerant Dual Three-Phase Winding PMSM for Helicopter Landing Gear EMA (2018)
Conference Proceeding
Giangrande, P., Madonna, V., Nuzzo, S., & Galea, M. (2018). Design of Fault-Tolerant Dual Three-Phase Winding PMSM for Helicopter Landing Gear EMA. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607684

On modern rotorcraft, electro-mechanical actuators (EMAs) are progressively replacing the bulky and more expensive hydraulic and/or pneumatic systems. Although the migration towards alternative actuation solutions, reliability remains a key requireme... Read More about Design of Fault-Tolerant Dual Three-Phase Winding PMSM for Helicopter Landing Gear EMA.

A Review of Torque Ripple Minimization Techniques in Switched Reluctance Machine (2018)
Conference Proceeding
Velmurugan, G., Bozhko, S., & Yang, T. (2018). A Review of Torque Ripple Minimization Techniques in Switched Reluctance Machine. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607614

Torque ripple is a major problem in Switched Reluctance Machine (SRM). Despite the high torque ripple and vibration, SRM has many advantages over many other machines. In this paper, the torque ripple minimization control techniques commonly used are... Read More about A Review of Torque Ripple Minimization Techniques in Switched Reluctance Machine.

Thermal Analysis of High Power High Voltage DC Solid State Power Controller (SSPC) for Next Generation Civil Tilt Rotor-craft (2018)
Conference Proceeding
Adhikari, J., Yang, T., Zhang, J., Rashed, M., Bozhko, S., & Wheeler, P. (2018). Thermal Analysis of High Power High Voltage DC Solid State Power Controller (SSPC) for Next Generation Civil Tilt Rotor-craft. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607314

This paper explores different possible topologies of a high-power high-voltage bidirectional DC solid state power controller (SSPC) for aerospace applications. The most suitable topology is then selected for design and implementation of the SSPC. A d... Read More about Thermal Analysis of High Power High Voltage DC Solid State Power Controller (SSPC) for Next Generation Civil Tilt Rotor-craft.

Design Considerations to Optimise Supercapacitor-based Energy Storage Systems for Aerospace Applications (2018)
Conference Proceeding
Fares, A., Klumpner, C., & Rashed, M. (2018). Design Considerations to Optimise Supercapacitor-based Energy Storage Systems for Aerospace Applications. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-8). https://doi.org/10.1109/ESARS-ITEC.2018.8607796

© 2018 IEEE. This paper investigates the design optimization of a supercapacitor-based energy storage system for aerospace applications which may be needed to complement the operation of a high power pulsed load such as electromechanical actuators ha... Read More about Design Considerations to Optimise Supercapacitor-based Energy Storage Systems for Aerospace Applications.

Performance Analysis of PMSM for High-Speed Starter-Generator System (2018)
Conference Proceeding
Diab, A., Gerada, C., Rashed, M., Bozhko, S., & Li, J. (2018). Performance Analysis of PMSM for High-Speed Starter-Generator System. In Proceedings - 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-7). https://doi.org/10.1109/ESARS-ITEC.2018.8607764

© 2018 IEEE. This paper presents the operating characteristics of surface-mounted permanent magnet synchronous machine taking into account the influence of stator resistance and inductance variation at high frequencies, whose effect are always neglec... Read More about Performance Analysis of PMSM for High-Speed Starter-Generator System.

An Enhanced Power Generation Centre for More Electric Aircraft Applications (2018)
Conference Proceeding
Lang, X., Yang, T., Enalou, H. B., Bozhko, S., & Wheeler, P. (2018). An Enhanced Power Generation Centre for More Electric Aircraft Applications. In Proceedings - 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/esars-itec.2018.8607688

© 2018 IEEE. The more-electric aircraft (MEA) concept has become a major trend due to its multiple advantages. Many functions which are conventionally driven by pneumatic, hydraulic and mechanical power systems are replaced by electrical ones onboard... Read More about An Enhanced Power Generation Centre for More Electric Aircraft Applications.

Direct vector control of induction motors based on rotor resistance-invariant rotor flux observer (2018)
Conference Proceeding
Bozhko, S., Kovbasa, S., Nikonenko, Y., & Peresada, S. (2018). Direct vector control of induction motors based on rotor resistance-invariant rotor flux observer. In Proceedings - 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607640

A novel speed-flux tracking controller for induction motors has been developed and experimentally verified. Direct rotor flux field oriented controller is designed for current-fed induction motor model on the base of full order hybrid continuous time... Read More about Direct vector control of induction motors based on rotor resistance-invariant rotor flux observer.

State of the Art of Electric Taxiing Systems (2018)
Conference Proceeding
Lukic, M., Hebala, A., Giangrande, P., Klumpner, C., Nuzzo, S., Chen, G., …Galea, M. (2018). State of the Art of Electric Taxiing Systems. In Proceedings - 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607786

The aviation industry represents an ever-expanding economy and the aircraft market forecast reveals an optimistic growth for the coming decades. New requirements and guidelines call for a more efficient, reliable, and environment friendly aircraft op... Read More about State of the Art of Electric Taxiing Systems.