Skip to main content

Research Repository

Advanced Search

All Outputs (24)

High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles (2019)
Conference Proceeding
Kumar, R. M. R., Zou, T., La Rocca, A., Vakil, G., Gerada, D., Walker, A., …Fernandes, B. G. (2019). High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles. In IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (1083-1088). https://doi.org/10.1109/IECON.2019.8927523

High power density and high torque density are the fundamental requirements for electric machines used in traction application. The former is obtained by potentially increasing the speed of the machine while the latter by using high energy density ra... Read More about High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles.

Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle (2019)
Conference Proceeding
La Rocca, S., La Rocca, A., Walker, A., Vakil, G., Gerada, D., Al-Ani, M., …Paciura, K. (2019). Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle. In Proceedings: 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS) (1-5). https://doi.org/10.1109/ICOECS46375.2019.8949929

Computational Fluid Dynamics (CFD) was used to carry out a fluid flow and thermal investigation of a high power dense traction machine for electric commercial vehicle. One of the features of the machine design considered is the high Length/Diameter (... Read More about Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle.

Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier (2019)
Conference Proceeding
Kumar, R. M. R., Vakil, G., Gerada, D., Walker, A., La Rocca, S., Al-Ani, M., …Fernandes, B. G. (2019). Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier. In IECON 2019 Proceedings - 45th Annual Conference of the IEEE Industrial Electronics Society (4347-4352). https://doi.org/10.1109/IECON.2019.8926624

Electrical machines with high torque density are required for traction application. Availability of bonded magnets with complex shapes and magnetization pattern can significantly extend the design space of electrical machines. This paper introduces a... Read More about Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier.

Rotor UMP & Mechanical Response in HSPMSM in Typical Running Conditions (2019)
Conference Proceeding
He, Y., Vakil, G., Zhang, X., Gao, P., Gerada, D., & Gerada, C. (2019). Rotor UMP & Mechanical Response in HSPMSM in Typical Running Conditions. In Proceedings: 2019 IEEE Energy Conversion Congress and Exposition (ECCE) (3878-3883). https://doi.org/10.1109/ECCE.2019.8913180

This paper presents a comprehensive analysis on the rotor unbalanced magnetic pull (UMP) and the consequent mechanical response in 6 typical running conditions in a 20000 rpm high speed permanent magnet synchronous motor (HSPMSM) through finite eleme... Read More about Rotor UMP & Mechanical Response in HSPMSM in Typical Running Conditions.

Comparative Analysis of AC losses with round magnet wire and Litz wire winding of a High – Speed PM Machine (2019)
Conference Proceeding
Bardalai, A., Zhang, X., Zou, T., Gerada, D., Li, J., & Gerada, C. (2019). Comparative Analysis of AC losses with round magnet wire and Litz wire winding of a High – Speed PM Machine. In 2019 22nd International Conference on Electrical Machines and Systems (ICEMS). https://doi.org/10.1109/ICEMS.2019.8922173

The growing trend of high speed, high power density machines for applications such as EVs, aerospace and machine tools demand these machines to work at higher electrical frequencies. Meanwhile, increasing the fundamental frequency leads to pronounced... Read More about Comparative Analysis of AC losses with round magnet wire and Litz wire winding of a High – Speed PM Machine.

Dual-Pulse Mode Control of a High-Speed Doubly Salient Electromagnetic Machine for Loss Reduction and Speed Range Extension (2019)
Journal Article
Yu, L., Zhang, Z., Bian, Z., Gerada, D., & Gerada, C. (2019). Dual-Pulse Mode Control of a High-Speed Doubly Salient Electromagnetic Machine for Loss Reduction and Speed Range Extension. IEEE Transactions on Industrial Electronics, 67(6), 1-10. https://doi.org/10.1109/tie.2019.2931253

In this paper, a dual-pulse mode control of a high-speed doubly salient electromagnetic machine (DSEM) for efficiency improvement over a wide speed range is investigated and implemented. The dual-pulse mode control method and operation principle are... Read More about Dual-Pulse Mode Control of a High-Speed Doubly Salient Electromagnetic Machine for Loss Reduction and Speed Range Extension.

Challenges of the optimization of a high-speed induction machine for naval applications (2019)
Journal Article
Buticchi, G., Gerada, D., Alberti, L., Galea, M., Wheeler, P., Bozhko, S., …Gerada, C. (2019). Challenges of the optimization of a high-speed induction machine for naval applications. Energies, 12(12), Article 2431. https://doi.org/10.3390/en12122431

In several industrial sectors, induction machines are being replaced with permanent magnet based alternatives, owing to the potential for higher power density and efficiency. However, high-speed applications feature a wide flux-weakening region, wher... Read More about Challenges of the optimization of a high-speed induction machine for naval applications.

Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft (2018)
Conference Proceeding
Li, Y., Zhang, Z., Gerada, D., & Gerada, C. (2018). Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607694

The generation performance of the switched reluctance machine (SRM)-based starter/generator (S/G) and the doubly salient electromagnetic machine (DSEM)-based S/G is analyzed and compared in this paper. The topologies, operation principles of the doub... Read More about Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft.

Design and Mathematical Modeling of Gearless SMC Flux Reversal Motor (2018)
Conference Proceeding
Prakht, V., Golovanov, D., Dmitrievskii, V., Gerada, D., & Kazakbaev, V. (2018). Design and Mathematical Modeling of Gearless SMC Flux Reversal Motor. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607567

© 2018 IEEE. This paper considers the design of a three-phase gearless flux reversal machine (FRM) with permanent magnets (PM) mounted on the stator. Its stator magnetic core is made of a solid soft magnetic composite material (SMC) with a slot for l... Read More about Design and Mathematical Modeling of Gearless SMC Flux Reversal Motor.

A Holistic Electrical Machine Design Tool for More-Electric and Hybrid-Electric Aircraft (2018)
Conference Proceeding
Golovanov, D., Xu, Z., Gerada, D., Gerada, C., & Papini, L. (2018). A Holistic Electrical Machine Design Tool for More-Electric and Hybrid-Electric Aircraft. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) ( 1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607715

The power density of electrical machines required for more-electric and hybrid-electric aircraft has become a critical aspect and target of optimization. This paper looks at the development aspects of a multi-domain tool to aid for system-level optim... Read More about A Holistic Electrical Machine Design Tool for More-Electric and Hybrid-Electric Aircraft.

Space vectors and pseudo inverse matrix methods for the radial force control in bearingless multi-sector permanent magnet machines (2018)
Journal Article
Sala, G., Valente, G., Formentini, A., Papini, L., Gerada, D., Zanchetta, P., …Gerada, C. (2018). Space vectors and pseudo inverse matrix methods for the radial force control in bearingless multi-sector permanent magnet machines. IEEE Transactions on Industrial Electronics, 65(9), 6912-6922. https://doi.org/10.1109/TIE.2018.2795590

Two different approaches to characterize the torque and radial force production in a Bearingless Multi-Sector Permanent Magnet (BMSPM) machine are presented in this work. The first method consists of modelling the motor in terms of torque and force p... Read More about Space vectors and pseudo inverse matrix methods for the radial force control in bearingless multi-sector permanent magnet machines.

Multi-domain optimization of high power-density PM electrical machines for system architecture selection (2017)
Journal Article
Golovanov, D., Papini, L., Gerada, D., Xu, Z., & Gerada, C. (2018). Multi-domain optimization of high power-density PM electrical machines for system architecture selection. IEEE Transactions on Industrial Electronics, 65(7), 5302-5312. https://doi.org/10.1109/TIE.2017.2772188

The power density of electrical machines for transport applications has become a critical aspect and target of optimization. This paper looks at the development of an intelligent, rapid, flexible, and multidomain tool to aid for system-level optimiza... Read More about Multi-domain optimization of high power-density PM electrical machines for system architecture selection.

Thermal investigation on HSPM with new alloy sleeve (2017)
Conference Proceeding
Zhang, X., Li, W., Zhang, H., Gerada, C., Gerada, D., & Li, J. (2017). Thermal investigation on HSPM with new alloy sleeve. . https://doi.org/10.1109/ICEMS.2017.8056423

This paper presents a developed copper-iron alloy which made as the rotor sleeve in a high speed permanent magnetic machine (HSPMG), whist investigating its benefits in improve machine thermal performance. The features of the new alloy is experimenta... Read More about Thermal investigation on HSPM with new alloy sleeve.

Holistic electrical machine optimization for system integration (2017)
Conference Proceeding
Gerada, D., Golovanov, D., Xu, Z., Papini, L., Degano, M., Zhang, H., & Gerada, C. (2017). Holistic electrical machine optimization for system integration. In 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia) (980-985). https://doi.org/10.1109/IFEEC.2017.7992174

The power density of electrical machines required for transport applications has become a critical aspect and target of optimization. This paper looks at the development aspects of a multi-domain tool to aid for system-level optimization of electrica... Read More about Holistic electrical machine optimization for system integration.

Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system (2017)
Journal Article
Guo, Q., Zhang, C., Li, L., Gerada, D., Zhang, J., & Wang, M. (2017). Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system. Applied Energy, 204, https://doi.org/10.1016/j.apenergy.2017.05.023

As a main driving force of electric vehicles (EVs), the losses of in-wheel permanent-magnet synchronous motor (PMSM) direct drive system can seriously affect the energy consumption of EVs. This paper proposes a loss optimization control strategy for... Read More about Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system.

Design and control of segmented triple three-phase SPM machines for fault tolerant drives (2017)
Conference Proceeding
Sala, G., Gerada, D., Gerada, C., & Tani, A. (2017). Design and control of segmented triple three-phase SPM machines for fault tolerant drives.

A new multiphase Surface Permanent Magnet (SPM) machine design is investigated in this paper. The machine has a nine-phase winding arranged in three sectors and supplied by three different Voltage Source Inverters (VSI). Stator segmentation between t... Read More about Design and control of segmented triple three-phase SPM machines for fault tolerant drives.

Radial force control for triple three-phase sectored SPM machines. Part I: Machine model (2017)
Conference Proceeding
Sala, G., Gerada, D., Gerada, C., & Tani, A. (2017). Radial force control for triple three-phase sectored SPM machines. Part I: Machine model.

The radial force control technique for a triple three-phase Surface Permanent Magnet (SPM) machine is investigated in this paper. The machine has a nine-phase winding arranged in three sectors and supplied by three different Voltage Source Inverters... Read More about Radial force control for triple three-phase sectored SPM machines. Part I: Machine model.

Radial force control for triple three-phase sectored SPM machines. Part II: Open winding fault tolerant control (2017)
Conference Proceeding
Sala, G., Gerada, D., Gerada, C., & Tani, A. (2017). Radial force control for triple three-phase sectored SPM machines. Part II: Open winding fault tolerant control.

A new advanced fault tolerant control technique for a triple three-phase Surface Permanent Magnet (SPM) machine is investigated in this paper. The machine has a nine-phase winding arranged in three sectors and supplied by three different Voltage Sour... Read More about Radial force control for triple three-phase sectored SPM machines. Part II: Open winding fault tolerant control.

CQICO and multiobjective thermal optimization for high-speed PM generator (2017)
Journal Article
Zhang, X., Li, W., Gerada, C., Zhang, H., Li, J., Galea, M., …Cao, J. (2017). CQICO and multiobjective thermal optimization for high-speed PM generator. IEEE Transactions on Magnetics, 53(6), https://doi.org/10.1109/TMAG.2017.2658187

This paper proposes a novel Continuous Quantum Immune Clonal Optimization (CQICO) algorithm for thermal optimization on an 117kW high speed permanent magnet generator (HSPMG). The proposed algorithm mixes the Quantum Computation into the Immune Cloni... Read More about CQICO and multiobjective thermal optimization for high-speed PM generator.

Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets (2016)
Conference Proceeding
Walker, A., Galea, M., Gerada, D., Gerada, C., Mebraki, A., & Brown, N. (2016). Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets. In Proceedings - 2016 XXII International Conference on Electrical Machines (ICEM) (1611-1617). https://doi.org/10.1109/ICELMACH.2016.7732739

This paper details the design process of a high performance electrical machine with the objective of achieving US Department of Energy FreedomCar 2020 targets, namely meeting the high speed efficiency requirement without sacrificing performance elsew... Read More about Development and design of a high performance traction machine for the FreedomCar 2020 traction machine targets.